component
DG411DQ-T1-E3
Public Made by Adomby adom
Vishay Intertech Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownDG411DQ-T1-E3
Vishay Intertech · Analog Switches, Multiplexers · TSSOP-16
DG411DQ-T1-E3 from Vishay Intertech, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic control input for switch 1; logic 0 (≤0.8 V) turns it ON and logic 1 (≥2.4 V) turns it OFF on the DG411. |
| 2 | D1 | bidirectional | Drain terminal of switch 1; conducts equally in both directions when on, with signals limited to the supply levels. |
| 3 | S1 | bidirectional | Source terminal of switch 1; conducts equally in both directions when on, with signals limited to the supply levels. |
| 4 | V- | power_in | Negative supply; V+ to V- is rated 44 V max and GND to V- 25 V max, and it is tied to 0 V in single-supply operation. |
| 5 | GND | power_in | Ground reference for the logic; GND to V- is rated 25 V max. |
| 6 | S4 | bidirectional | Source terminal of switch 4; conducts equally in both directions when on, with signals limited to the supply levels. |
| 7 | D4 | bidirectional | Drain terminal of switch 4; conducts equally in both directions when on, with signals limited to the supply levels. |
| 8 | IN4 | input | Logic control input for switch 4; logic 0 (≤0.8 V) turns it ON and logic 1 (≥2.4 V) turns it OFF on the DG411. |
| 9 | IN3 | input | Logic control input for switch 3; logic 0 (≤0.8 V) turns it ON and logic 1 (≥2.4 V) turns it OFF on the DG411. |
| 10 | D3 | bidirectional | Drain terminal of switch 3; conducts equally in both directions when on, with signals limited to the supply levels. |
| 11 | S3 | bidirectional | Source terminal of switch 3; conducts equally in both directions when on, with signals limited to the supply levels. |
| 12 | VL | power_in | Logic supply; rated from (GND - 0.3) to (V+) + 0.3 V and tied to V+ in single-supply operation. |
| 13 | V+ | power_in | Positive supply; V+ to V- is rated 44 V max, and unipolar operation is 5 V to 44 V. |
| 14 | S2 | bidirectional | Source terminal of switch 2; conducts equally in both directions when on, with signals limited to the supply levels. |
| 15 | D2 | bidirectional | Drain terminal of switch 2; conducts equally in both directions when on, with signals limited to the supply levels. |
| 16 | IN2 | input | Logic control input for switch 2; logic 0 (≤0.8 V) turns it ON and logic 1 (≥2.4 V) turns it OFF on the DG411. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Analog Signal Range | VANALOG | -15 | 15 | V | Full (D suffix, -40 to 85 °C); V+ = 15 V, V- = -15 V | 3 | |
| Drain-Source On-Resistance | RDS(on) | 25 | 35 | Ω | Room; V+ = 13.5 V, V- = -13.5 V, IS = -10 mA, VD = ±8.5 V | 3 | |
| Drain-Source On-Resistance | RDS(on) | 45 | Ω | Full (D suffix); V+ = 13.5 V, V- = -13.5 V, IS = -10 mA, VD = ±8.5 V | 3 | ||
| Switch Off Leakage Current | IS(off) | -0.25 | 0.1 | 0.25 | nA | Room; V+ = 16.5 V, V- = -16.5 V, VD = ±15.5 V, VS = ±15.5 V | 3 |
| Switch Off Leakage Current | IS(off) | -5 | 5 | nA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VD = ±15.5 V, VS = ±15.5 V | 3 | |
| Drain Off Leakage Current | ID(off) | -0.25 | 0.1 | 0.25 | nA | Room; V+ = 16.5 V, V- = -16.5 V, VD = ±15.5 V, VS = ±15.5 V | 3 |
| Drain Off Leakage Current | ID(off) | -5 | 5 | nA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VD = ±15.5 V, VS = ±15.5 V | 3 | |
| Channel On Leakage Current | ID(on) | -0.4 | 0.1 | 0.4 | nA | Room; V+ = 16.5 V, V- = -16.5 V, VS = VD = ±15.5 V | 3 |
| Channel On Leakage Current | ID(on) | -10 | 10 | nA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VS = VD = ±15.5 V | 3 | |
| Input Current, VIN Low | IIL | -0.5 | 0.005 | 0.5 | µA | Full (D suffix); VIN under test = 0.8 V | 3 |
| Input Current, VIN High | IIH | -0.5 | 0.005 | 0.5 | µA | Full (D suffix); VIN under test = 2.4 V | 3 |
| Turn-On Time | tON | 110 | 175 | ns | Room; RL = 300 Ω, CL = 35 pF, VS = ±10 V, see figure 2 | 3 | |
| Turn-On Time | tON | 220 | ns | Full (D suffix); RL = 300 Ω, CL = 35 pF, VS = ±10 V, see figure 2 | 3 | ||
| Turn-Off Time | tOFF | 100 | 145 | ns | Room; RL = 300 Ω, CL = 35 pF, VS = ±10 V, see figure 2 | 3 | |
| Turn-Off Time | tOFF | 160 | ns | Full (D suffix); RL = 300 Ω, CL = 35 pF, VS = ±10 V, see figure 2 | 3 | ||
| Positive Supply Current | I+ | 0.0001 | 1 | µA | Room; V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | |
| Positive Supply Current | I+ | 5 | µA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | ||
| Negative Supply Current | I- | -1 | -0.0001 | µA | Room; V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | |
| Negative Supply Current | I- | -5 | µA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | ||
| Logic Supply Current | IL | 0.0001 | 1 | µA | Room; V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | |
| Logic Supply Current | IL | 5 | µA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | ||
| Ground Current | IGND | -1 | -0.0001 | µA | Room; V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | |
| Ground Current | IGND | -5 | µA | Full (D suffix); V+ = 16.5 V, V- = -16.5 V, VIN = 0 V or 5 V | 3 | ||
| Analog Signal Range (unipolar) | VANALOG | 12 | V | Full (D suffix); V+ = 12 V, V- = 0 V | 4 | ||
| Drain-Source On-Resistance (unipolar) | RDS(on) | 40 | 80 | Ω | Room; V+ = 10.8 V, IS = -10 mA, VD = 3 V, 8 V | 4 | |
| Drain-Source On-Resistance (unipolar) | RDS(on) | 100 | Ω | Full (D suffix); V+ = 10.8 V, IS = -10 mA, VD = 3 V, 8 V | 4 | ||
| Turn-On Time (unipolar) | tON | 175 | 250 | ns | Room; RL = 300 Ω, CL = 35 pF, VS = 8 V, see figure 2 | 4 | |
| Turn-On Time (unipolar) | tON | 315 | ns | Hot (full temp, D suffix); RL = 300 Ω, CL = 35 pF, VS = 8 V, see figure 2 | 4 | ||
| Turn-Off Time (unipolar) | tOFF | 95 | 125 | ns | Room; RL = 300 Ω, CL = 35 pF, VS = 8 V, see figure 2 | 4 | |
| Turn-Off Time (unipolar) | tOFF | 140 | ns | Hot (full temp, D suffix); RL = 300 Ω, CL = 35 pF, VS = 8 V, see figure 2 | 4 | ||
| Positive Supply Current (unipolar) | I+ | 0.0001 | 1 | µA | Room; V+ = 13.5 V, VIN = 0 V or 5 V | 4 | |
| Positive Supply Current (unipolar) | I+ | 5 | µA | Hot (full temp, D suffix); V+ = 13.5 V, VIN = 0 V or 5 V | 4 | ||
| Negative Supply Current (unipolar) | I- | -1 | -0.0001 | µA | Room; V+ = 13.5 V, VIN = 0 V or 5 V | 4 | |
| Negative Supply Current (unipolar) | I- | -5 | µA | Hot (full temp, D suffix); V+ = 13.5 V, VIN = 0 V or 5 V | 4 | ||
| Logic Supply Current (unipolar) | IL | 0.0001 | 1 | µA | Room; V+ = 13.5 V, VIN = 0 V or 5 V | 4 | |
| Logic Supply Current (unipolar) | IL | 5 | µA | Hot (full temp, D suffix); V+ = 13.5 V, VIN = 0 V or 5 V | 4 | ||
| Ground Current (unipolar) | IGND | -1 | -0.0001 | µA | Room; V+ = 13.5 V, VIN = 0 V or 5 V | 4 | |
| Ground Current (unipolar) | IGND | -5 | µA | Hot (full temp, D suffix); V+ = 13.5 V, VIN = 0 V or 5 V | 4 | ||
| Positive-to-Negative Supply Voltage (V+ to V-) | 44 | V | 2 | ||||
| GND to V- | 25 | V | 2 | ||||
| Continuous Current (any terminal) | 30 | mA | 2 | ||||
| Peak Current, S or D | 100 | mA | Pulsed at 1 ms, 10 % duty cycle | 2 | |||
| Unipolar Supply Voltage (V+ to V-) | 5 | 44 | V | Single-supply operation; V+ tied to VL, V- tied to 0 V | 8 | ||
| Operating Temperature (D suffix) | -40 | 85 | °C | D suffix (DQ package ordering range) | 2 | ||
| Digital Input Low Level | 0.8 | V | Logic '0' level, as shown in functional diagram | 1 | |||
| Digital Input High Level | 2.4 | V | Logic '1' level, as shown in functional diagram | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Pc | 16-pin plastic DIPc 470 | 2 |
CAD (KiCad official)
- Symbol:
DG411DQ-T1-E3 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dg411dq-t1-e3-etched.step/dg411dq-t1-e3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dg411dq-t1-e3.step/dg411dq-t1-e3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (14 pp, sha256
7d2688acee1bfd79, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).