Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F469VIT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32F469VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional GPIO Port E pin 2, alternate functions include TRACECLK, SPI4_SCK, SAI1_MCLK_A with 5V tolerant I/O structure.
2 VSS power_in Ground supply connection.
3 VBAT power_in Backup battery supply for RTC, backup SRAM and backup registers, 1.8V to 3.6V.
4 PC13 bidirectional GPIO Port C pin 13 with RTC tamper or timestamp capability, 5V tolerant through power switch with 3mA current limit.
5 PC14/OSC32_IN bidirectional GPIO Port C pin 14 or 32 kHz oscillator input, 5V tolerant through power switch with limited current capability.
6 PC15/OSC32_OUT bidirectional GPIO Port C pin 15 or 32 kHz oscillator output, 5V tolerant through power switch with limited current capability.
7 VSS power_in Ground supply connection.
8 VDD power_in Main positive supply voltage, 1.7V to 3.6V.
9 PH0/OSC_IN bidirectional GPIO Port H pin 0 or external oscillator input for 4-26 MHz crystal, 5V tolerant.
10 PH1/OSC_OUT bidirectional GPIO Port H pin 1 or external oscillator output for 4-26 MHz crystal, 5V tolerant.
11 NRST input Active-low reset pin with internal weak pull-up resistor, resets device on low level.
12 PC0 bidirectional GPIO Port C pin 0 with analog channel ADC123_IN10, alternate functions include OTG_HS_ULPI_STP, 5V tolerant.
13 PC1 bidirectional GPIO Port C pin 1 with analog channel ADC123_IN11, alternate functions include SPI2_MOSI, ETH_MDC, 5V tolerant.
14 PC2 bidirectional GPIO Port C pin 2 with analog channel ADC123_IN12, alternate functions include SPI2_MISO, OTG_HS_ULPI_DIR, 5V tolerant.
15 PC3 bidirectional GPIO Port C pin 3 with analog channel ADC123_IN13, alternate functions include SPI2_MOSI, OTG_HS_ULPI_NXT, 5V tolerant.
16 VSSA power_in Analog ground supply for ADCs and DAC.
17 VREF+ power_in Positive reference voltage for ADCs, 1.7V to 3.6V.
18 VDDA power_in Analog power supply for ADCs and temperature sensor, 1.7V to 3.6V.
19 PA0/WKUP bidirectional GPIO Port A pin 0 with wakeup capability and analog channel ADC123_IN0, alternate timer/UART functions, 5V tolerant.
20 PA1 bidirectional GPIO Port A pin 1 with analog channel ADC123_IN1, alternate functions include TIM2_CH2, USART2_RTS, 5V tolerant.
21 PA2 bidirectional GPIO Port A pin 2 with analog channel ADC123_IN2, alternate functions include TIM2_CH3, USART2_TX, 5V tolerant.
22 PA3 bidirectional GPIO Port A pin 3 with analog channel ADC123_IN3, alternate functions include TIM2_CH4, USART2_RX, 5V tolerant.
23 VSS power_in Ground supply connection.
24 VDD power_in Main positive supply voltage, 1.7V to 3.6V.
25 PA4 bidirectional GPIO Port A pin 4 with analog channels DAC_OUT1 and ADC12_IN4, 3.3V tolerant (directly connected to analog parts), alternate SPI/I2S/DCMI functions.
26 PA5 bidirectional GPIO Port A pin 5 with analog channels DAC_OUT2 and ADC12_IN5, 3.3V tolerant, alternate SPI1_SCK and OTG_HS functions.
27 PA6 bidirectional GPIO Port A pin 6 with analog channel ADC12_IN6, 5V tolerant, alternate functions include TIM1_BKIN, SPI1_MISO, DCMI_PIXCLK.
28 PA7 bidirectional GPIO Port A pin 7 with analog channel ADC12_IN7, 5V tolerant, alternate functions include TIM1_CH1N, SPI1_MOSI, QUADSPI_CLK.
29 PB0 bidirectional GPIO Port B pin 0 with analog channel ADC12_IN8, 5V tolerant, alternate functions include TIM1_CH2N, TIM3_CH3.
30 PB1 bidirectional GPIO Port B pin 1 with analog channel ADC12_IN9, 5V tolerant, alternate functions include TIM1_CH3N, TIM3_CH4.
31 PB2/BOOT1 bidirectional GPIO Port B pin 2 with boot selection capability, 5V tolerant, floating input after reset.
32 PE7 bidirectional GPIO Port E pin 7, 5V tolerant, alternate functions include TIM1_ETR, UART7_RX, QUADSPI_BK2_IO0, FMC_D4.
33 PE8 bidirectional GPIO Port E pin 8, 5V tolerant, alternate functions include TIM1_CH1N, UART7_TX, QUADSPI_BK2_IO1, FMC_D5.
34 PE9 bidirectional GPIO Port E pin 9, 5V tolerant, alternate functions include TIM1_CH1, QUADSPI_BK2_IO2, FMC_D6.
35 PE10 bidirectional GPIO Port E pin 10, 5V tolerant, alternate functions include TIM1_CH2N, QUADSPI_BK2_IO3, FMC_D7.
36 PE11 bidirectional GPIO Port E pin 11, 5V tolerant, alternate functions include TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3.
37 PE12 bidirectional GPIO Port E pin 12, 5V tolerant, alternate functions include TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4.
38 PE13 bidirectional GPIO Port E pin 13, 5V tolerant, alternate functions include TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE.
39 PE14 bidirectional GPIO Port E pin 14, 5V tolerant, alternate functions include TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK.
40 PE15 bidirectional GPIO Port E pin 15, 5V tolerant, alternate functions include TIM1_BKIN, FMC_D12, LCD_R7.
41 PB10 bidirectional GPIO Port B pin 10, 5V tolerant, alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX.
42 PB11 bidirectional GPIO Port B pin 11, 5V tolerant, alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, DSIHOST_TE.
43 VCAP1 power_in External capacitor connection for core voltage regulator, typically 1-10 µF capacitor to ground.
44 VSS power_in Ground supply connection.
45 VDD power_in Main positive supply voltage, 1.7V to 3.6V.
46 PB12 bidirectional GPIO Port B pin 12, 5V tolerant, alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, CAN2_RX.
47 PB13 bidirectional GPIO Port B pin 13, 5V tolerant, alternate functions include TIM1_CH1N, SPI2_SCK, USART3_CTS, CAN2_TX, has OTG_HS_VBUS capability.
48 PB14 bidirectional GPIO Port B pin 14, 5V tolerant, alternate functions include TIM1_CH2N, SPI2_MISO, USART3_RTS, OTG_HS_DM.
49 PB15 bidirectional GPIO Port B pin 15, 5V tolerant, alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, OTG_HS_DP.
50 PD8 bidirectional GPIO Port D pin 8, 5V tolerant, alternate functions include USART3_TX, FMC_D13.
51 PD9 bidirectional GPIO Port D pin 9, 5V tolerant, alternate functions include USART3_RX, FMC_D14.
52 PD10 bidirectional GPIO Port D pin 10, 5V tolerant, alternate functions include USART3_CK, FMC_D15, LCD_B3.
53 PD14 bidirectional GPIO Port D pin 14, 5V tolerant, alternate functions include TIM4_CH3, FMC_D0.
54 PD15 bidirectional GPIO Port D pin 15, 5V tolerant, alternate functions include TIM4_CH4, FMC_D1.
55 VDDDSI power_in DSI host interface positive power supply for D-PHY, 1.2V ±5% regulated supply.
56 VCAPDSI power_in External capacitor connection for DSI D-PHY regulator, typically capacitor to ground.
57 DSIHOST_D0P bidirectional MIPI DSI data lane 0 positive signal, differential pair with DSIHOST_D0N for camera/display interface.
58 DSIHOST_D0N bidirectional MIPI DSI data lane 0 negative signal, differential pair with DSIHOST_D0P for camera/display interface.
59 VSSDSI power_in DSI host interface ground for D-PHY.
60 DSIHOST_CKP bidirectional MIPI DSI clock lane positive signal, differential pair with DSIHOST_CKN for DSI timing.
61 DSIHOST_CKN bidirectional MIPI DSI clock lane negative signal, differential pair with DSIHOST_CKP for DSI timing.
62 VDD12DSI power_in 1.2V supply for DSI D-PHY interface blocks.
63 DSIHOST_D1P bidirectional MIPI DSI data lane 1 positive signal, differential pair with DSIHOST_D1N for camera/display interface.
64 DSIHOST_D1N bidirectional MIPI DSI data lane 1 negative signal, differential pair with DSIHOST_D1P for camera/display interface.
65 VDDUSB power_in Dedicated USB power supply for OTG_FS and OTG_HS PHYs, 3.0V to 3.6V isolated from main VDD.
66 PC6 bidirectional GPIO Port C pin 6, 5V tolerant, alternate functions include TIM3_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0.
67 PC7 bidirectional GPIO Port C pin 7, 5V tolerant, alternate functions include TIM3_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1.
68 PC8 bidirectional GPIO Port C pin 8, 5V tolerant, alternate functions include TRACED1, TIM3_CH3, USART6_CK, SDIO_D0, DCMI_D2.
69 PC9 bidirectional GPIO Port C pin 9, 5V tolerant, alternate functions include MCO2, TIM3_CH4, I2C3_SDA, QUADSPI_BK1_IO0, SDIO_D1.
70 PA8 bidirectional GPIO Port A pin 8, 5V tolerant, alternate functions include MCO1 (main clock output), TIM1_CH1, I2C3_SCL, USART1_CK.
71 PA9 bidirectional GPIO Port A pin 9, 5V tolerant, has OTG_FS_VBUS capability, alternate functions include TIM1_CH2, USART1_TX, DCMI_D0.
72 PA10 bidirectional GPIO Port A pin 10, 5V tolerant, alternate functions include TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1.
73 PA11 bidirectional GPIO Port A pin 11, 5V tolerant, alternate functions include TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM.
74 PA12 bidirectional GPIO Port A pin 12, 5V tolerant, alternate functions include TIM1_ETR, USART1_RTS, CAN1_TX, OTG_FS_DP.
75 PA13 bidirectional GPIO Port A pin 13, JTAG test mode select and SWD data I/O, 5V tolerant, debug interface pin.
76 VCAP2 power_in External capacitor connection for PLL voltage regulator, typically 1-10 µF capacitor to ground.
77 VDD power_in Main positive supply voltage, 1.7V to 3.6V.
78 VSS power_in Ground supply connection.
79 PA14 bidirectional GPIO Port A pin 14, JTAG test clock and SWD clock, 5V tolerant, debug interface pin.
80 PA15 bidirectional GPIO Port A pin 15, JTAG test data input, 5V tolerant, alternate SPI/timer functions, debug interface pin.
81 PC10 bidirectional GPIO Port C pin 10, 5V tolerant, alternate functions include SPI3_SCK, USART3_TX, QUADSPI_BK1_IO1, SDIO_D2.
82 PC11 bidirectional GPIO Port C pin 11, 5V tolerant, alternate functions include SPI3_MISO, USART3_RX, QUADSPI_BK2_NCS, SDIO_D3.
83 PC12 bidirectional GPIO Port C pin 12, 5V tolerant, alternate functions include TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, SDIO_CK.
84 PD0 bidirectional GPIO Port D pin 0, 5V tolerant, alternate functions include CAN1_RX, FMC_D2.
85 PD1 bidirectional GPIO Port D pin 1, 5V tolerant, alternate functions include CAN1_TX, FMC_D3.
86 PD2 bidirectional GPIO Port D pin 2, 5V tolerant, alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDIO_CMD.
87 PD3 bidirectional GPIO Port D pin 3, 5V tolerant, alternate functions include SPI2_SCK, USART2_CTS, FMC_CLK, DCMI_D5.
88 PD4 bidirectional GPIO Port D pin 4, 5V tolerant, alternate functions include USART2_RTS, FMC_NOE.
89 PD5 bidirectional GPIO Port D pin 5, 5V tolerant, alternate functions include USART2_TX, FMC_NWE.
90 PD6 bidirectional GPIO Port D pin 6, 5V tolerant, alternate functions include SPI3_MOSI, USART2_RX, FMC_NWAIT, DCMI_D10.
91 PD7 bidirectional GPIO Port D pin 7, 5V tolerant, alternate functions include USART2_CK, FMC_NE1.
92 PB3 bidirectional GPIO Port B pin 3, JTAG test data output and serial wire output, 5V tolerant, debug interface pin.
93 PB4 bidirectional GPIO Port B pin 4, JTAG test reset, 5V tolerant, alternate TIM3 and SPI functions, debug interface pin.
94 PB5 bidirectional GPIO Port B pin 5, 5V tolerant, alternate functions include TIM3_CH2, I2C1_SMBA, SPI1_MOSI, CAN2_RX.
95 PB6 bidirectional GPIO Port B pin 6, 5V tolerant, alternate functions include TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS.
96 PB7 bidirectional GPIO Port B pin 7, 5V tolerant, alternate functions include TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL.
97 BOOT0 input Boot configuration input, selects between main flash memory (low) or embedded bootloader (high) at device startup, requires external pull-up resistor.
98 PB8 bidirectional GPIO Port B pin 8, 5V tolerant, alternate functions include TIM4_CH3, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4.
99 PB9 bidirectional GPIO Port B pin 9, 5V tolerant, alternate functions include TIM4_CH4, I2C1_SDA, CAN1_TX, SDIO_D5.
100 VDD power_in Main positive supply voltage, 1.7V to 3.6V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

CAD (KiCad official)

  • Symbol: STM32F469VIT6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32f469vit6-etched.step / stm32f469vit6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f469vit6.step / stm32f469vit6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (220 pp, sha256 a7b7191d1d38665a, retrieved 2026-09-29, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF