3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8924BM-71-33E-100.000000
SiTime · Oscillators · SMD2016-4P
SIT8924BM-71-33E-100.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Output enable input: logic high gives the specified frequency output and logic low puts the output in high impedance, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 µF or higher between VDD and GND is required. |
| 3 | OUT | output | Oscillator clock output with LVCMOS/LVTTL levels, duty cycle 45% to 55%. |
| 4 | VDD | power_in | Power supply voltage, 1.62 V to 1.98 V for the 1.8 V option and 2.25 V to 3.63 V for the 2.25 V to 3.63 V range, with a 0.1 µF or higher capacitor to GND required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Resonators/Oscillators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -20 | 20 | ppm | Inclusive of Initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load (15 pF ± 10%) | 1 | |
| Output Frequency Range | f | 1 | 110 | MHz | Refer to Table 13 to 15 for a list of supported frequencies | 1 | |
| Supply Voltage | Vdd | 2.25 | 3.63 | V | All voltages between 2.25 V and 3.63 V including 2.5 V, 2.8 V, 3.0 V and 3.3 V are supported | 1 | |
| Operating Temperature Range (ambient) | T_use | -55 | 125 | °C | -55, +125 °C Extendedcold AEC-Q100 Grade1 | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdd levels | 1 | |
| Current Consumption | Idd | 4 | 4.8 | mA | No load condition, f = 20 MHz, Vdd = 2.25 V to3.63 V | 1 | |
| OE Disable Current | I_od | 4.5 | mA | Vdd = 2.5 V to 3.3 V, OE = Low, Output in high Z state | 1 | ||
| Rise/Fall Time 20%-80% | Tr, Tf | 1.5 | 3 | ns | Vdd = 2.25 V - 3.63 V, 20% - 80% | 1 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd = 3.0 V or 3.3 V) | 1 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0 V or 3.3 V) | 1 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance (ST logic low) | Z_in | 2 | M | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5.5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.6 | 2.5 | ps | f = 75 MHz, 2.25 V to 3.63 V | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage Vdd (absolute) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Thermal Resistance JA, 4 Layer Board (2016 package) | JA | 152 | °C/W | JA, 4 Layer Board, 2.0 x 1.6 mm (2016) package | 3 | ||
| Thermal Resistance JA, 2 Layer Board (2016 package) | JA | 252 | °C/W | JA, 2 Layer Board, 2.0 x 1.6 mm (2016) package | 3 | ||
| Thermal Resistance JC, Bottom (2016 package) | JC | 36 | °C/W | JC, Bottom, 2.0 x 1.6 mm (2016) package | 3 | ||
| Maximum Operating Junction Temperature | 135 | °C | Max operating ambient 125°C | 3 |
CAD (KiCad official)
- Symbol:
SIT8924BM-71-33E-100.000000 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
sit8924bm-71-33e-100-000000-etched.step/sit8924bm-71-33e-100-000000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8924bm-71-33e-100-000000.step/sit8924bm-71-33e-100-000000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (19 pp, sha256
ec4c13f00e3f6765, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).