3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC9140C501MR-G
Torex Semicon · DC-DC Converters · SOT-25-5
XC9140C501MR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable: H is active for all types, L puts A/B types in stand-by and selects bypass mode for C type, and the pin must not be left open. |
| 2 | GND | power_in | Ground reference; all datasheet voltages are specified relative to GND. |
| 3 | VBAT | power_in | Power input with absolute maximum rating of -0.3 to 7.0 V, and an operating input voltage range of 0.7 V to 5.5 V (hold) and 0.9 V to 5.5 V (start-up). |
| 4 | VOUT | power_out | Boost converter output with absolute maximum rating of -0.3 to 7.0 V; this product is set to 5.0 V output without UVLO. |
| 5 | LX | output | Switching node driving the inductor, with absolute maximum voltage of -0.3 to VOUT + 0.3 V or 7.0 V (whichever is lower) and LX pin current rated at 700 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VBAT | 5.5 | V | 7 | |||
| Output Voltage (effective) | VOUT(E) | 4.9 | 5.1 | V | VPULL=1.5V, voltage to start oscillation while VOUT is decreasing; 5.0V row of voltage chart | 10 | |
| Operation Start Voltage | VST1 | 0.9 | V | IOUT=1mA | 7 | ||
| Supply Current | Iq | 7.3 | 10.3 | μA | Oscillation stops, VOUT=VOUT(T)+0.5V; 5.0V row of voltage chart | 10 | |
| Input Pin Current | IBAT | 0.25 | 1 | μA | VOUT=VOUT(T)+0.5V | 7 | |
| Bypass Mode Current | IBYP | 3.5 | 6.1 | μA | VBAT=VLX=5.5V, VCE=0V | 7 | |
| PFM Switching Current | IPFM | 295 | 350 | 405 | mA | IOUT=3mA | 7 |
| Maximum ON Time | tONMAX | 3.1 | 4.6 | 6 | μs | VPULL=1.5V, VOUT=VOUT(T)×0.98 | 7 |
| LX SW Pch ON Resistance | RLXP | 0.53 | 0.72 | Ω | VBAT=VLX=VCE=VOUT(T)+0.5V, IOUT=200mA; 5.0V row of voltage chart | 10 | |
| CE H Voltage | VCEH | 0.75 | 5.5 | V | VBAT=VPULL=1.5V, VOUT=VOUT(T)×0.98; while VCE=0.3→0.75V, voltage to start oscillation | 7 | |
| CE L Voltage | VCEL | 0.3 | V | VBAT=VPULL=1.5V, VOUT=VOUT(T)×0.98; while VCE=0.75→0.3V, voltage to stop oscillation | 7 | ||
| CE H Current | ICEH | -0.1 | 0.1 | μA | VBAT=VCE=VLX=VOUT=5.5V | 7 | |
| CE L Current | ICEL | -0.1 | 0.1 | μA | VBAT=VLX=VOUT=5.5V, VCE=0V | 7 | |
| BAT Pin Voltage | VBAT | -0.3 | 7 | V | Voltages referenced to GND | 5 | |
| LX Pin Voltage | VLX | -0.3 | V | Maximum printed as VOUT + 0.3 or 7.0 (*1), whichever is lowest | 5 | ||
| VOUT Pin Voltage | VOUT | -0.3 | 7 | V | Voltages referenced to GND | 5 | |
| CE Pin Voltage | VCE | -0.3 | 7 | V | Voltages referenced to GND | 5 | |
| LX Pin Current | ILX | 700 | mA | 5 | |||
| Power Dissipation SOT-25 (IC only) | Pd | 250 | mW | Ta=25℃, IC only | 5 | ||
| Power Dissipation SOT-25 (40mm x 40mm standard board) | Pd | 600 | mW | Ta=25℃, PCB mounted, reference only | 5 | ||
| Power Dissipation SOT-25 (JESD51-7 board) | Pd | 760 | mW | Ta=25℃, PCB mounted, reference only | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ˚C | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ˚C | 5 |
CAD (KiCad official)
- Symbol:
XC9140C501MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files:
xc9140c501mr-g-etched.step/xc9140c501mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc9140c501mr-g.step/xc9140c501mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (33 pp, sha256
edb4d39d568dee80, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).