Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TMI6240

TMI · Power Distribution Switches · SOT-23-5

TMI6240 from TMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input pin. 2.7 V to 18 V operating range (20 V abs max). Bypass with a ≥1 µF X5R/X7R ceramic capacitor placed close to the pin.
2 GND power_in Ground reference pin for the device.
3 EN input Active-high enable input. Drive high (V_EN > 1.0 V typ. rising threshold) to turn the internal MOSFET on; drive low (< 0.9 V typ. falling threshold) to enter micro-power shutdown and trigger output auto-discharge (~30 mA). Do not float. Abs max 20 V.
4 SS passive Soft-start programming pin. Connect a capacitor (C_SS) from this pin to GND to set the output rising slew rate / soft-start time (e.g. 1.1 ms at C_SS=4.7 nF, V_IN=12 V). Floating gives the default minimum soft-start time (~0.15 ms). Abs max 6.0 V.
5 VOUT power_out Switch output pin. Drain of the internal N-channel MOSFET (R_DS(on) ≈ 50 mΩ at V_IN=12 V). Delivers up to 3.5 A to the load; auto-discharged to GND (~30 mA) when EN is low. Abs max 20 V.

Key specifications

Parameter Value
Manufacturer TMI
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TMI6240
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TMI datasheet (14 pp, sha256 eae19045d6dd6fa7, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF