component
TC4066BFELNF
Public Made by Adomby adom
TOSHIBA Analog Switches, Multiplexers, SOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTC4066BFELNF
TOSHIBA · Analog Switches, Multiplexers · SOP-14
TC4066BFELNF from TOSHIBA, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN/OUT1 | passive | Bidirectional switch 1 terminal; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 2 | OUT/IN1 | passive | Bidirectional switch 1 terminal on the opposite side; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 3 | OUT/IN2 | passive | Bidirectional switch 2 terminal; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 4 | IN/OUT2 | passive | Bidirectional switch 2 terminal on the opposite side; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 5 | CONT2 | input | Control input for switch 2, where H gives a low-impedance switch and L gives a high impedance above 10^9 ohm; unused inputs must be tied to VDD or VSS. |
| 6 | CONT3 | input | Control input for switch 3, where H gives a low-impedance switch and L gives a high impedance above 10^9 ohm; unused inputs must be tied to VDD or VSS. |
| 7 | VSS | power_in | Negative supply (ground) pin, VSS = 0 V in the operating ranges. |
| 8 | IN/OUT3 | passive | Bidirectional switch 3 terminal; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 9 | OUT/IN3 | passive | Bidirectional switch 3 terminal on the opposite side; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 10 | OUT/IN4 | passive | Bidirectional switch 4 terminal; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 11 | IN/OUT4 | passive | Bidirectional switch 4 terminal on the opposite side; switch I/O voltage range VSS - 0.5 V to VDD + 0.5 V. |
| 12 | CONT4 | input | Control input for switch 4, where H gives a low-impedance switch and L gives a high impedance above 10^9 ohm; unused inputs must be tied to VDD or VSS. |
| 13 | CONT1 | input | Control input for switch 1, where H gives a low-impedance switch and L gives a high impedance above 10^9 ohm; unused inputs must be tied to VDD or VSS. |
| 14 | VDD | power_in | Positive supply pin, operating range 3 V to 18 V (absolute maximum VSS + 20 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | SOP-14 |
| Category | Interface |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage | VDD | -0.5 | 20 | V | referenced to VSS: VSS - 0.5 to VSS + 20 | 2 | |
| Control input voltage | VCIN | -0.5 | 0.5 | V | min referenced to VSS, max referenced to VDD (VSS - 0.5 to VDD + 0.5) | 2 | |
| Switch I/O voltage | VI/VO | -0.5 | 0.5 | V | min referenced to VSS, max referenced to VDD (VSS - 0.5 to VDD + 0.5) | 2 | |
| Power dissipation (SOP/TSSOP) | PD | 180 | mW | SOP/TSSOP package; DIP is 300 mW | 2 | ||
| Potential difference across I/O during ON | VI - VO | -0.5 | 0.5 | V | during ON | 2 | |
| Control input current | ICIN | -10 | 10 | mA | 2 | ||
| Operating temperature range | Topr | -40 | 85 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| DC supply voltage | VDD | 3 | 18 | V | VSS = 0 V | 2 | |
| Input/Output voltage | VIN/VOUT | 0 | V | VSS = 0 V; upper limit is VDD | 2 | ||
| Control input high voltage | VIH | 3.5 | V | /IIS/ = 10 μA; VDD = 5 V; -40°C | 3 | ||
| Control input high voltage | VIH | 7 | V | /IIS/ = 10 μA; VDD = 10 V; -40°C | 3 | ||
| Control input high voltage | VIH | 11 | V | /IIS/ = 10 μA; VDD = 15 V; -40°C | 3 | ||
| Control input high voltage | VIH | 3.5 | 2.75 | V | /IIS/ = 10 μA; VDD = 5 V; 25°C | 3 | |
| Control input high voltage | VIH | 7 | 5.5 | V | /IIS/ = 10 μA; VDD = 10 V; 25°C | 3 | |
| Control input high voltage | VIH | 11 | 8.25 | V | /IIS/ = 10 μA; VDD = 15 V; 25°C | 3 | |
| Control input low voltage | VIL | 1.5 | V | /IIS/ = 10 μA; VDD = 5 V; -40°C | 3 | ||
| Control input low voltage | VIL | 3 | V | /IIS/ = 10 μA; VDD = 10 V; -40°C | 3 | ||
| Control input low voltage | VIL | 4 | V | /IIS/ = 10 μA; VDD = 15 V; -40°C | 3 | ||
| Control input low voltage | VIL | 2.25 | 1.5 | V | /IIS/ = 10 μA; VDD = 5 V; 25°C | 3 | |
| Control input low voltage | VIL | 4.5 | 3 | V | /IIS/ = 10 μA; VDD = 10 V; 25°C | 3 | |
| Control input low voltage | VIL | 6.75 | 4 | V | /IIS/ = 10 μA; VDD = 15 V; 25°C | 3 | |
| On-state resistance | RON | 800 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 5 V; -40°C | 3 | ||
| On-state resistance | RON | 210 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 10 V; -40°C | 3 | ||
| On-state resistance | RON | 140 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 15 V; -40°C | 3 | ||
| On-state resistance | RON | 290 | 950 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 5 V; 25°C | 3 | |
| On-state resistance | RON | 120 | 250 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 10 V; 25°C | 3 | |
| On-state resistance | RON | 85 | 160 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 15 V; 25°C | 3 | |
| On-state resistance | RON | 1200 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 5 V; 85°C | 3 | ||
| On-state resistance | RON | 300 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 10 V; 85°C | 3 | ||
| On-state resistance | RON | 200 | Ω | 0 ≤ VIS ≤ VDD; RL = 10 kΩ; VDD = 15 V; 85°C | 3 | ||
| Input/output leakage current | IOFF | -100 | 0.1 | 100 | nA | VIN = 18 V, VOUT = 0 V; VDD = 18 V; 25°C | 3 |
| Input/output leakage current | IOFF | -1000 | 1000 | nA | VIN = 18 V, VOUT = 0 V; VDD = 18 V; 85°C | 3 | |
| Control input current, H level | IIH | 1 | μA | VIH = 18 V; VDD = 18 V; 85°C | 3 | ||
| Control input current, L level | IIL | -1 | μA | VIL = 0 V; VDD = 18 V; 85°C | 3 | ||
| Quiescent supply current | IDD | 0.25 | μA | VIN = VSS, VDD (Note 1); VDD = 5 V; -40°C | 3 | ||
| Quiescent supply current | IDD | 0.5 | μA | VIN = VSS, VDD (Note 1); VDD = 10 V; -40°C | 3 | ||
| Quiescent supply current | IDD | 1 | μA | VIN = VSS, VDD (Note 1); VDD = 15 V; -40°C | 3 | ||
| Quiescent supply current | IDD | 0.001 | 0.25 | μA | VIN = VSS, VDD (Note 1); VDD = 5 V; 25°C | 3 | |
| Quiescent supply current | IDD | 0.001 | 0.5 | μA | VIN = VSS, VDD (Note 1); VDD = 10 V; 25°C | 3 | |
| Quiescent supply current | IDD | 0.002 | 1 | μA | VIN = VSS, VDD (Note 1); VDD = 15 V; 25°C | 3 | |
| Quiescent supply current | IDD | 7.5 | μA | VIN = VSS, VDD (Note 1); VDD = 5 V; 85°C | 3 | ||
| Quiescent supply current | IDD | 15 | μA | VIN = VSS, VDD (Note 1); VDD = 10 V; 85°C | 3 | ||
| Quiescent supply current | IDD | 30 | μA | VIN = VSS, VDD (Note 1); VDD = 15 V; 85°C | 3 | ||
| Propagation delay time (control-OUT) | tpZL, tpZH | 55 | 120 | ns | RL = 1 kΩ; CL = 50 pF; VDD = 5 V; VSS = 0 V; Ta = 25°C | 4 | |
| Propagation delay time (control-OUT) | tpZL, tpZH | 25 | 40 | ns | RL = 1 kΩ; CL = 50 pF; VDD = 10 V; VSS = 0 V; Ta = 25°C | 4 | |
| Propagation delay time (control-OUT) | tpZL, tpZH | 20 | 30 | ns | RL = 1 kΩ; CL = 50 pF; VDD = 15 V; VSS = 0 V; Ta = 25°C | 4 | |
| Propagation delay time (control-OUT) | tpLZ, tpHZ | 45 | 80 | ns | RL = 1 kΩ; CL = 50 pF; VDD = 5 V; VSS = 0 V; Ta = 25°C | 4 | |
| Propagation delay time (control-OUT) | tpLZ, tpHZ | 30 | 70 | ns | RL = 1 kΩ; CL = 50 pF; VDD = 10 V; VSS = 0 V; Ta = 25°C | 4 | |
| Propagation delay time (control-OUT) | tpLZ, tpHZ | 25 | 60 | ns | RL = 1 kΩ; CL = 50 pF; VDD = 15 V; VSS = 0 V; Ta = 25°C | 4 |
CAD (KiCad official)
- Symbol:
TC4066BFELNF - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
tc4066bfelnf-etched.step/tc4066bfelnf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc4066bfelnf.step/tc4066bfelnf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (10 pp, sha256
72b78bdb2c8989b1, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).