Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M601B

Mysentech · Temperature Sensors · DFN-8(2x2)

M601B from Mysentech, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply pin; the datasheet gives a supply range of 1.8V to 5.5V (3.3V typical).
2 ALERT output Temperature alarm indicator output that changes level when a programmed high or low threshold is reached, with IOH of 1 mA typical at VDD=5V.
3 DQ bidirectional Single-wire data interface; requires an external pull-up of 1 kΩ to 10 kΩ (4.7 kΩ typical), with VOL at most 0.4V at IOL of 3 mA.
4 NC unconnected No internal connection; leave floating or connect to ground.
5 GND power_in Ground reference pin.
6 NC unconnected No internal connection; leave floating or connect to ground.
7 NC unconnected No internal connection; leave floating or connect to ground.
8 NC unconnected No internal connection; leave floating or connect to ground.

Key specifications

Parameter Value
Manufacturer Mysentech
Package DFN-8(2x2)
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
温度误差 (0℃ to +50℃) tERR -0.5 0.5 ℃ 0℃ to +50℃ 6
温度误差 (-55°C to +125°C) tERR -1.5 1.5 ℃ -55°C to +125°C 6
温度误差 (-70°C to +150°C) tERR -2 2 ℃ -70°C to +150°C 6
长期漂移 0.03 °C/年 6
测温范围 -70 150 ℃ 6
供电电压 (absolute maximum) VDD -0.3 6 V 7
引脚上的最大电压 -0.3 6 V 7
引脚上的输入电流 -100 100 mA 7
运行温度范围 -70 150 ℃ 7
存储温度范围 -70 150 ℃ 7
ESD HBM (人体放电模式) -8 8 kV 7
供电电压 VDD 1.8 3.3 5.5 V 7
供电电流 空闲状态(单次测量模式) IDD 0.1 1 uA 空闲状态(单次测量模式) 7
输出低电平电压 VOL 0.4 V IOL = -3 mA 7
输入漏电流 IIN -0.1 0.1 uA 7
上拉电阻 Rup 1 4.7 10 kΩ 7
非易失存储写周期 tWR 40 ms 8
EEPROM 写次数 NEEWR 50000 次 -55°C 到+55°C 8
写 0 低电平时间 tLOW0 60 60 120 µs 见备注 22
写 1 低电平时间 tLOW1 1 5 15 µs 见备注 22
存在检测高电平时间 tPDHIGH 15 30 60 µs 见备注 22
存在检测低电平时间 tPDLOW 60 115 240 µs 见备注 22

CAD (KiCad official)

  • Symbol: M601B
  • Footprint: Package_DFN_QFN:DFN-8_2x2mm_P0.5mm
  • 3D model: DFN-8(2x2) (KiCad packages3D, STEP)
  • 3D model files: m601b-etched.step / m601b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m601b.step / m601b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Mysentech datasheet (28 pp, sha256 aeda39d8ec9e0fa0, retrieved 2026-11-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF