Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

LM3670MFX-ADJ

Texas Instruments · DC-DC Converters · SOT-23-5

LM3670MFX-ADJ from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input, connected to the input filter capacitor; recommended input voltage range is 2.5 V to 5.5 V.
2 GND power_in Ground pin.
3 EN input Digital enable input; pulling EN low puts the device in shutdown, where it draws 0.1 µA typical.
4 FB input Analog feedback input, connected to the output filter capacitor; on the adjustable version it sets the output voltage (0.7 V to 2.5 V).
5 SW output Switching node connecting the internal PFET switch and NFET synchronous rectifier to the inductor; the inductor saturation current rating must exceed the 750-mA maximum switch peak current limit.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: LM3670MFX-ADJ
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lm3670mfx-adj-etched.step / lm3670mfx-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3670mfx-adj.step / lm3670mfx-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 facbd196af963148, retrieved 2026-10-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF