Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PGA2310UA

Texas Instruments · Audio Amplifiers · SOIC-16W (DW)

PGA2310UA from Texas Instruments, in a SOIC-16W (DW). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 ZCEN input Zero Crossing Enable Input (Active High)
2 CS input Chip Select Input (Active Low)
3 SDI input Serial Data Input
4 VD+ power_in Digital Power Supply, 5 V
5 DGND power_in Digital Ground
6 SCLK input Serial Clock Input
7 SDO output Serial Data Output
8 MUTE input Mute Control Input (Active Low)
9 VINR input Analog Input, Right Channel
10 AGNDR power_in Analog Ground, Right Channel
11 VOUTR output Analog Output, Right Channel
12 VA+ power_in Analog Power Supply, 15 V
13 VA- power_in Analog Power Supply, -15 V
14 VOUTL output Analog Output, Left Channel
15 AGNDL power_in Analog Ground, Left Channel
16 VINL input Analog Input, Left Channel

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16W (DW)
Category Amplifiers/Comparators
Pins 16

CAD (Adom-generated)

  • Symbol: PGA2310UA
  • Footprint: Adom_Gen:Texas_Instruments_DW0016A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: pga2310ua-etched.step / pga2310ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pga2310ua.step / pga2310ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 87f660dc5010c953, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: DW0016A 4220721/A land pattern, SBOS207C p.24: 2.0 x 0.6 mm pads, pitch 1.27 mm, pad rows 9.3 mm centre-to-centre. Body from the outline p.23: 10.5/10.1 x 7.6/7.4 body, 10.63/9.97 across the leads, 2.65 MAX, 0.3/0.1 standoff, 16X 0.51/0.31 leads, 14X 1.27 pitch. Shared land Adom_Gen:Texas_Instruments_DW0016A (TI DW0016A EXAMPLE BOARD LAYOUT 4220721/A, CD4050B SCHS046 p.29 (DW0016B 4221009/B ISO1042 ZHCSI90F p.33, DWE0016A 4223098/A AMC3302 p.38, DVE0016A 4224275 UCC12040 p.34 print the same IPC-7351 NOMINAL land and the same PACKAGE OUTLINE)). FAMLAND (task master 2026-11-21: REGATE wrong-land families; the maker's printed land; DW HV ruling; SOIC-W waves GO, FAMWAVES). the sheet's HV / ISOLATION OPTION land (1.65 x 0.6 at 9.75) is not used: task master ruling 2026-11-21, the HV land goes only to parts whose own sheet states isolation ratings and prints it; standard land (not an isolation part).

Datasheet PDF