Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS1H000AQDGNRQ1

Texas Instruments · Power Distribution Switches · MSOP-8-EP

TPS1H000AQDGNRQ1 from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input control for output activation with internal pull-down resistor.
2 DIAG_EN input Input to enable diagnostic function.
3 FAULT output Open-drain diagnostic status output for reporting fault conditions; leave floating when not used.
4 CL output Adjustable current limit pin; connect external resistor to GND to set current limit or connect directly to GND for internal limit.
5 DELAY bidirectional Configuration pin for current limit response mode (Hold/Latch/Auto-retry) with internal pull-up.
6 GND power_in Ground reference pin.
7 OUT output High-side switch source output connected to load.
8 VS power_in Supply voltage input accepting 3.4 V to 40 V for high-side switch drain.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS1H000AQDGNRQ1
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: tps1h000aqdgnrq1-etched.step / tps1h000aqdgnrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps1h000aqdgnrq1.step / tps1h000aqdgnrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 56b8e8d7d46e3f09, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF