Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6557CGN#PBF

Analog Devices · Operational Amplifier · SSOP-16-150mil

LT6557CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable control pin: the part is enabled when pulled low (about 1.5V below V+ or more), and an internal 40k pull-up turns the part off if the pin is left unconnected.
2 GND power_in Ground reference for the Enable pin (Pin 1) and Bias Control Voltage pin (Pin 16); this pin must be connected externally to ground.
3 IN R input Red channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open).
4 GND R power_in Ground of the red channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground.
5 IN G input Green channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open).
6 GND G power_in Ground of the green channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground.
7 IN B input Blue channel input with a nominal impedance of 200kΩ when the input bias circuit is inactive (Pin 16 open).
8 GND B power_in Ground of the blue channel amplifier; it is not internally connected to other ground pins and must be connected externally to ground.
9 V+ B power_in Positive supply voltage of the blue channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing.
10 OUT B output Blue channel output.
11 V+ G power_in Positive supply voltage of the green channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing.
12 OUT G output Green channel output.
13 V+ R power_in Positive supply voltage of the red channel amplifier; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing.
14 OUT R output Red channel output.
15 V+ power_in Positive supply voltage of the control circuitry; it is not internally connected to other supply pins and must be externally connected to the supply bus with proper bypassing.
16 BCV passive Bias control voltage: a resistor between Pin 16 and Pin 2 (GND) sets the DC input bias for the three amplifiers, and leaving the pin open disables the internal biasing.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Amplifiers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 12 40 mV VIN = 1.25V 2
Input Offset Voltage (full operating temperature range) VOS 15 50 mV VIN = 1.25V, ● full operating temperature range 2
Input Current IIN 35 70 µA VIN = 1.25V 2
Input Current (full operating temperature range) IIN 45 100 µA VIN = 1.25V, ● full operating temperature range 2
Input Resistance RIN 90 200 kΩ VIN = 0.75V to 1.75V, BCV (Pin 6) Open 2
Input Resistance (full operating temperature range) RIN 50 150 kΩ VIN = 0.75V to 1.75V, BCV (Pin 6) Open, ● full operating temperature range 2
Gain Error AV ERR -2.5 0.5 2.5 % VIN = 0.75V to 1.75V 3
Gain Error (full operating temperature range) AV ERR -3 0.5 3 % VIN = 0.75V to 1.75V, ● full operating temperature range 3
Gain Match Between Channels AV MATCH -2.75 0.4 2.75 % VIN = 0.75V to 1.75V 3
Gain Match Between Channels (full operating temperature range) AV MATCH -3.25 0.4 3.25 % VIN = 0.75V to 1.75V, ● full operating temperature range 3
Input Voltage Bias VIN(DC) 1 1.25 1.5 V RBCV = 348Ω 3
Input Voltage Bias (full operating temperature range) VIN(DC) 0.8 1.1 1.7 V RBCV = 348Ω, ● full operating temperature range 3
Power Supply Rejection Ratio PSRR 42 50 dB VS = 4V to 6V, VIN = 1.25V 3
Power Supply Rejection Ratio (full operating temperature range) PSRR 38 47 dB VS = 4V to 6V, VIN = 1.25V, ● full operating temperature range 3
Output Voltage Swing Low VOL 0.8 0.9 V 3
Output Voltage Swing Low (full operating temperature range) VOL 0.9 1 V ● full operating temperature range 3
Output Voltage Swing High VOH 4.1 4.2 V 3
Output Voltage Swing High (full operating temperature range) VOH 4 4.1 V ● full operating temperature range 3
Supply Current per Amplifier IS 22.5 25 mA VEN = 0.4V, RL = ∞, Includes IS of V+ (Pin 15) 3
Supply Current per Amplifier (full operating temperature range) IS 25 29 mA VEN = 0.4V, RL = ∞, Includes IS of V+ (Pin 15), ● full operating temperature range 3
Total Supply Current (Disabled) 10 450 µA VEN = Open, RL = ∞ 3
Total Supply Current (Disabled) (full operating temperature range) 10 1000 µA VEN = Open, RL = ∞, ● full operating temperature range 3
Enable Pin Current IEN -250 -125 µA VEN = 0.4V 3
Enable Pin Current (full operating temperature range) IEN -300 -150 µA VEN = 0.4V, ● full operating temperature range 3
Short-Circuit Current ISC -70 100 mA 3
Short-Circuit Current (full operating temperature range) ISC -40 90 mA ● full operating temperature range 3
Slew Rate SR 1400 2200 V/µs VOUT = 1.25V to 3.75V (Note 5) 3
Full Power Bandwidth FPBW 220 350 MHz VOUT = 2VP-P (Note 6) 3
Input Current -10 10 mA 2
Output Current -70 70 mA Note 2 2
Operating Temperature Range -40 85 °C Note 3 2
Specified Temperature Range -40 85 °C Note 4 2
Junction Temperature (SSOP) TJ 150 °C SSOP package 2
Storage Temperature Range (SSOP) -65 150 °C SSOP package 2
Lead Temperature (SSOP) 300 °C Soldering, 10 sec, SSOP package 2
Thermal Resistance Junction-to-Ambient (SSOP) θJA 110 °C/W SSOP package 2
Supply Range 3 7.5 V 1

CAD (KiCad official)

  • Symbol: LT6557CGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: lt6557cgn-etched.step / lt6557cgn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6557cgn.step / lt6557cgn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 0e0dbc6dd3c3f8bd, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF