component
AT24CM01-SSHM-T
Public Made by Adomby adom
Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAT24CM01-SSHM-T
Microchip Tech · EEPROM · SOIC-8
AT24CM01-SSHM-T from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No Connect pin per the datasheet pin table; it has no function on this package. |
| 2 | A1 | input | Device address input that can be hardwired or left floating for compatibility; if floating it is pulled down to GND when capacitive coupling to VCC is below 3pF, otherwise Atmel recommends connecting it to GND. |
| 3 | A2 | input | Device address input that can be hardwired or left floating for compatibility; if floating it is pulled down to GND when capacitive coupling to VCC is below 3pF, otherwise Atmel recommends connecting it to GND. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial data pin for the 2-wire bus that may be wire-ORed with other open-drain or open-collector devices and requires an external pull-up. |
| 6 | SCL | input | Serial clock input; data is clocked into the device on the positive edge and clocked out on the negative edge of SCL. |
| 7 | WP | input | Write Protect: connecting to GND allows normal write operations, while connecting to VCC inhibits all memory writes; if floating it is pulled down to GND when capacitive coupling to VCC is below 3pF, otherwise Atmel recommends connecting it to GND. |
| 8 | VCC | power_in | Power supply, 1.7V to 5.5V for the 1.7V option (this MPN's M suffix); the 2.5V option is specified from 2.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, 1.7V Option | VCC1 | 1.7 | 5.5 | V | 4 | ||
| Supply Current Read | ICC | 2 | mA | VCC = 5.0V Read at 400kHz | 4 | ||
| Supply Current Write | ICC | 3 | mA | VCC = 5.0V Write at 400kHz | 4 | ||
| Standby Current | ISB | 1 | μA | VCC = 1.7V, VIN = VCC or VSS | 4 | ||
| Standby Current | ISB | 2 | μA | VCC = 2.5V | 4 | ||
| Standby Current | ISB | 3 | μA | VCC = 3.6V, VIN = VCC or VSS | 4 | ||
| Standby Current | ISB | 6 | μA | VCC = 5.5V | 4 | ||
| Input Leakage Current | ILI | 0.1 | 3 | μA | VIN = VCC or VSS | 4 | |
| Output Leakage Current | ILO | 0.05 | 3 | μA | VOUT = VCC or VSS | 4 | |
| Input Low Level | VIL | -0.6 | V | 4 | |||
| Output Low Level | VOL1 | 0.2 | V | VCC = 1.7V IOL = 0.15mA | 4 | ||
| Output Low Level | VOL2 | 0.4 | V | VCC = 3.0V IOL = 2.1mA | 4 | ||
| Input/Output Capacitance (SDA) | CI/O | 8 | pF | VI/O = 0V | 4 | ||
| Input Capacitance (A2, A1, SCL) | CIN | 6 | pF | VIN = 0V | 4 | ||
| Clock Frequency, SCL | fSCL | 400 | kHz | 5 | |||
| Clock Pulse Width Low | tLOW | 1300 | ns | 5 | |||
| Clock Pulse Width High | tHIGH | 600 | ns | 5 | |||
| Noise Suppression Time | tI | 100 | ns | 5 | |||
| Clock Low to Data Out Valid | tAA | 50 | 900 | ns | 5 | ||
| Bus Free Time Before New Transmission | tBUF | 1300 | ns | 5 | |||
| Start Condition Hold Time | tHD.STA | 600 | ns | 5 | |||
| Start Condition Set-up Time | tSU.STA | 600 | ns | 5 | |||
| Data In Hold Time | tHD.DAT | 0 | ns | 5 | |||
| Data In Set-up Time | tSU.DAT | 100 | ns | 5 | |||
| Inputs Rise Time | tR | 300 | ns | 5 | |||
| Inputs Fall Time | tF | 300 | ns | 5 | |||
| Stop Condition Set-up Time | tSU.STO | 600 | ns | 5 | |||
| Data Out Hold Time | tDH | 50 | ns | 5 | |||
| Write Cycle Time | tWR | 5 | ms | 5 | |||
| Industrial Operating Temperature Range | TAI | -40 | 85 | °C | 4 | ||
| Operating Temperature | -55 | 125 | °C | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Voltage on any pin with respect to ground | -1 | 7 | V | 2 | |||
| Maximum Operating Voltage | 6.25 | V | 2 | ||||
| DC Output Current | 5 | mA | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | U = Green, Matte Sn Lead Finish | 13 |
CAD (KiCad official)
- Symbol:
AT24CM01-SSHM-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
at24cm01-sshm-t-etched.step/at24cm01-sshm-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24cm01-sshm-t.step/at24cm01-sshm-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (21 pp, sha256
1d3635134c038877, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).