Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM393BIPWR

Texas Instruments · Comparators · TSSOP-8

LM393BIPWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Comparator 1 open-drain output; maximum sink current 25 mA when IN- exceeds IN+.
2 1IN- input Comparator 1 inverting input; input voltage range 0 V to VCC-2.0 V, maximum input bias current 25 nA.
3 1IN+ input Comparator 1 non-inverting input; input voltage range 0 V to VCC-2.0 V, maximum input bias current 25 nA.
4 GND power_in Ground reference potential.
5 2IN+ input Comparator 2 non-inverting input; input voltage range 0 V to VCC-2.0 V, maximum input bias current 25 nA.
6 2IN- input Comparator 2 inverting input; input voltage range 0 V to VCC-2.0 V, maximum input bias current 25 nA.
7 2OUT output Comparator 2 open-drain output; maximum sink current 25 mA when IN- exceeds IN+.
8 VCC power_in Positive power supply; operating range 2 V to 36 V for LM393B variant.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO -2.5 0.37 2.5 mV VS = 5 to 36V 6
Input offset voltage (over temperature) VIO -4 4 mV VS = 5 to 36V, TA = -40°C to +85°C 6
Input bias current IB -3.5 -25 nA 6
Input bias current (over temperature) IB -50 nA TA = -40°C to +85°C 6
Input offset current IOS -10 0.5 10 nA 6
Input offset current (over temperature) IOS -25 25 nA TA = -40°C to +85°C 6
Large-signal differential voltage amplification AVD 50 200 V/mV VS = 15V, VO = 1.4V to 11.4V; RL ≥ 15kΩ to (V+) 6
Low-level output voltage VOL 110 400 mV ISINK ≤ 4mA, VID = -1V 6
Low-level output voltage (over temperature) VOL 550 mV ISINK ≤ 4mA, VID = -1V, TA = -40°C to +85°C 6
High-level output leakage current IOH-LKG 0.1 20 nA (V+) = VO = 5V; VID = 1V 6
High-level output leakage current IOH-LKG 0.3 50 nA (V+) = VO = 36V; VID = 1V 6
Low-level output current IOL 6 21 mA VOL = 1.5V; VID = -1V; VS = 5V 6
Quiescent current (all comparators) IQ 400 600 µA VS = 5V, no load 6
Quiescent current (all comparators, over temperature) IQ 550 800 µA VS = 36V, no load, TA = -40°C to +85°C 6
Response time, high-to-low propagation delay t 300 ns TTL input, Vref = 1.4V 7
Response time, high-to-low propagation delay (small signal) t 1000 ns input overdrive = 5mV, input step = 100mV 7
Junction-to-ambient thermal resistance RθJA 200.6 °C/W PW (TSSOP) 8-pin package 5
Junction-to-case (top) thermal resistance RθJC(top) 89.6 °C/W PW (TSSOP) 8-pin package 5
Junction-to-board thermal resistance RθJB 131.3 °C/W PW (TSSOP) 8-pin package 5
Junction-to-top characterization parameter ψJT 22.1 °C/W PW (TSSOP) 8-pin package 5
Junction-to-board characterization parameter ψJB 129.6 °C/W PW (TSSOP) 8-pin package 5

CAD (KiCad official)

  • Symbol: LM393BIPWR
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm393bipwr-etched.step / lm393bipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm393bipwr.step / lm393bipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 ef2f6d546e5c5f65, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF