Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SMF-048000-3CL4T0

AKER · Oscillators · SMD3225-4P

SMF-048000-3CL4T0 from AKER, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Enable / Disable Control input Enable/disable control input; the electrical table lists an enable voltage high (Vhi) and disable voltage low (Vlo) of 70%VDD and 30%VDD, with output enable and disable delay times Ton and Toff.
2 GND power_in Ground reference for the oscillator; the datasheet recommends a bypass capacitor (0.01 µF shown in the test circuit) between VDD and GND because the SMA series has no internal bypass capacitor.
3 OUTPUT output CMOS clock output with rise and fall times of 5 ns (10%-90% VDD), VoH of 2.97 V minimum and VoL of 0.33 V as listed in the electrical table, measured into a CMOS load CL.
4 VDD power_in Supply pin rated at 3.3 V ±10% (2.97 V to 3.63 V) with input current Icc listed as 20 mA maximum in the electrical table.

Key specifications

Parameter Value
Manufacturer AKER
Package SMD3225-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability -25 25 ppm 3
Aging -3 3 ppm First Year 3
Supply Voltage tolerance VDD -10 10 % Nominal supply 3.3 V (printed as 3.3±10%) 3
Supply Voltage VDD 3.3 V Printed as 3.3±10% 3
Operating Temperature -40 25 85 ℃ 3
Storage Temperature Range -55 125 ℃ 3
Output Voltage High VoH 2.97 V 3
Output Voltage Low VoL 0.33 V 3
Input Current Icc 20 mA 3
Standby Current IsT 10 µA 3
Rise Time Tr 5 ns 10%~90%VDD Level 3
Fall Time Tf 5 ns 10%~90%VDD Level 3
Symmetry (Duty ratio) TH/T 40 60 % 3
Enable Voltage High Vhi 70 %VDD 3
Disable Voltage Low Vlo 30 %VDD 3
Output Enable Delay Time T on 10 ms 3
Output Disable Delay Time T off 200 ns 3
Start-up Time Tosc 10 ms 3
Phase Jitter RMS 1 ps 12KHz~20MHz 3
Nominal Frequency 48 MHz 3

CAD (KiCad official)

  • Symbol: SMF-048000-3CL4T0
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: smf-048000-3cl4t0-etched.step / smf-048000-3cl4t0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); smf-048000-3cl4t0.step / smf-048000-3cl4t0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AKER datasheet (10 pp, sha256 6cbc701b81c27295, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF