component
JSM602
Public Made by Adomby adom
JSMSEMI Linear Hall Sensors, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownJSM602
JSMSEMI · Linear Hall Sensors · SOT-23
JSM602 from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin; the datasheet specifies an operating supply voltage of 3 V to 12 V (absolute maximum 15 V). |
| 2 | GND | power_in | Ground pin. |
| 3 | Vout | output | Analog output whose voltage changes proportionally with the applied magnetic field; absolute maximum output current is 5 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-23 |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 操作电压 (operating voltage) | VDD | 3 | 5 | 12 | V | Ta=25˚C, VDD=5.0V (table header) | 2 |
| 供电电流 (supply current) | IDD | 3 | 5 | 8 | mA | Ta=25˚C, VDD=5.0V (table header) | 2 |
| 响应时间 (response time) | Tack | 3 | uS | Ta=25˚C, VDD=5.0V (table header) | 2 | ||
| 静态输出电压 (quiescent output voltage) | Vo | 2.25 | 2.5 | 2.75 | V | B=0 | 3 |
| 灵敏度 (sensitivity) | Sen | 2.2 | 2.5 | 2.8 | mV/G | 3 | |
| 最小输出电压 (minimum output voltage) | Vmin | 1 | V | B= -600G | 3 | ||
| 最大输出电压 (maximum output voltage) | Vmax | 4 | V | B= 600G | 3 | ||
| 输出负载电阻 (output load resistance) | RL | 200 | KOhm | /ΔVOUT/<1 5mV | 3 | ||
| 输出电流 (output current) | IOUT | 1.5 | mA | Ta=25˚C, VDD=5.0V (table header) | 2 | ||
| 电源电压 (supply voltage) | VDD | -0.5 | 15 | V | 2 | ||
| 输出电压 (output voltage) | Vout | -0.5 | 15 | V | 2 | ||
| 输出电流 (output current) | IOUT | 0 | 5 | mA | 2 | ||
| 操作温度范围 (operating temperature range) | TA | -40 | 150 | ℃ | 2 | ||
| 储存温度范围 (storage temperature range) | TS | -50 | 165 | ℃ | 2 | ||
| 电源电压 (supply voltage, recommended) | VDD | 3 | 12 | V | Pin 1 VDD supply, per pin assignment | 2 | |
| 操作温度范围 (ambient temperature, ordering) | TA | -40 | 150 | ℃ | Per ordering table | 2 | |
| 焊接温度 (soldering temperature) | 350 | ℃ | Recommended; duration not over 5 s | 10 |
CAD (KiCad official)
- Symbol:
JSM602 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
jsm602-etched.step/jsm602-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jsm602.step/jsm602.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (10 pp, sha256
7bf70db010b6bd91, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).