Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8390HFE#PBF

Analog Devices · DC-DC Controllers · TSSOP-28-EP

LT8390HFE#PBF from Analog Devices, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BG1 output Buck-side bottom gate drive swings from ground to INTVCC to drive the buck-side bottom N-channel MOSFET.
2 BST1 power_out Buck-side bootstrap floating driver supply with integrated Schottky diode from INTVCC, swinging from a diode drop below INTVCC to (VIN + INTVCC), requiring an external bootstrap capacitor to SW1.
3 SW1 output Buck-side switch node that swings from a Schottky diode voltage drop below ground up to VIN.
4 TG1 output Buck-side top gate drive swings from SW1 to BST1 to drive the buck-side top N-channel MOSFET.
5 LSP input Positive terminal of the buck-side inductor current sense resistor (RSENSE), which requires a Kelvin connection for accurate current sensing.
6 LSN input Negative terminal of the buck-side inductor current sense resistor (RSENSE), which requires a Kelvin connection for accurate current sensing.
7 VIN power_in Input supply, operating range 4V to 60V, that sets the buck, buck-boost or boost operating region and must be bypassed to ground with at least 1µF ceramic.
8 INTVCC power_out Internal 5V linear regulator output supplied from VIN that powers control circuitry and gate drivers and must be bypassed with at least 4.7µF ceramic.
9 EN/UVLO input Enable and undervoltage lockout pin that must be forced below 0.3V to shut down the part and above 1.233V for normal operation.
10 TEST input Factory test pin for testing only that must be connected directly to ground for the part to operate properly.
11 LOADEN input Load switch enable input that controls the high-side PMOS load switch, and must be tied to VREF or INTVCC if the load switch control is not used.
12 VREF power_out Voltage reference output providing an accurate 2V reference capable of supplying 1mA, which must be bypassed to ground with a 0.47µF ceramic capacitor.
13 CTRL input Control input that programs the ISP/ISN current sense threshold, with 100mV full scale when tied to VREF, and that must be forced below 0.3V to stop switching.
14 ISP input Positive terminal of the ISP/ISN current sense resistor (RIS), which requires a Kelvin connection for accurate current sensing.
15 ISN input Negative terminal of the ISP/ISN current sense resistor (RIS), which requires a Kelvin connection for accurate current sensing.
16 ISMON output ISP/ISN current sense monitor output that generates a voltage equal to ten times V(ISP-ISN) plus a 0.25V offset.
17 PGOOD output Power good open-drain output that is pulled low when FB is within ±10% of the final regulation voltage and requires an external pull-up resistor.
18 SS passive Soft-start timer pin with an internal 12.5µA pull-up, where a 0.1µF capacitor to ground is recommended, and a resistor to VREF selects hiccup, latch-off (499kΩ) or keep-running (100kΩ) fault mode.
19 FB input Voltage loop feedback input that regulates VFB to 1.00V, where VFB below 0.25V triggers the short-circuit fault mode and VFB above 1.1V turns off TG1, BG1, TG2, BG2 and LOADTG.
20 VC passive Error amplifier output that sets the inductor current comparator threshold and is compensated with an external RC network.
21 RT passive Switching frequency setting pin where a resistor to ground sets the internal oscillator frequency from 150kHz to 650kHz.
22 SYNC/SPRD input Switching frequency synchronization or spread spectrum pin, grounded for internal oscillator frequency, driven by a clock to synchronize, or tied to INTVCC for ±15% triangle spread spectrum.
23 LOADTG output High-side PMOS load switch top gate drive that swings from the higher of (VOUT-5V) and 1.2V up to VOUT, and is left unconnected if not used.
24 VOUT power_in Output supply that sets the buck, buck-boost or boost operating region, serves as the positive rail for LOADTG, and must be bypassed to ground with at least 1µF ceramic.
25 TG2 output Boost-side top gate drive that swings from SW2 to BST2 to drive the boost-side top N-channel MOSFET.
26 SW2 output Boost-side switch node that swings from a Schottky diode voltage drop below ground up to VOUT.
27 BST2 power_out Boost-side bootstrap floating driver supply with integrated Schottky diode from INTVCC, swinging from a diode drop below INTVCC to (VOUT + INTVCC), requiring an external bootstrap capacitor to SW2.
28 BG2 output Boost-side bottom gate drive swings from ground to INTVCC to drive the boost-side bottom N-channel MOSFET.
29 GND power_in Exposed pad is ground and must be soldered directly to the ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSSOP-28-EP
Category Power Supply Chip
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN, EN/UVLO, VOUT, ISP, ISN voltage 60 V 2
(ISP-ISN) voltage -1 1 V 2
SW1, SW2, LSP, LSN voltage -6 60 V 2
INTVCC, (BST1-SW1), (BST2-SW2) voltage 6 V 2
(BST1-LSP), (BST1-LSN) voltage 6 V 2
FB, LOADEN, SYNC/SPRD, CTRL, PGOOD voltage 6 V 2
Operating Junction Temperature Range -40 150 °C LT8390H 2
Storage Temperature Range -65 150 °C 2
VIN Operating Voltage Range 4 60 V l (full operating temperature range) 3
VOUT Voltage Range 0 60 V l (full operating temperature range) 3
INTVCC Regulation Voltage 4.85 5 5.15 V IINTVCC = 20mA 3
INTVCC Current Limit 80 110 160 mA VINTVCC = 4.5V 3
INTVCC Undervoltage Lockout Threshold 3.44 3.54 3.64 V Falling 3
VREF Regulation Voltage 1.97 2 2.03 V IVREF = 100µA, l (full operating temperature range) 3
VREF Current Limit 2 2.5 3.2 mA VREF = 1.8V 3
VREF Undervoltage Lockout Threshold 1.78 1.84 1.9 V Falling 3
EN/UVLO Shutdown Threshold 0.3 0.6 1 V l (full operating temperature range) 4
EN/UVLO Enable Threshold Falling 1.196 1.22 1.244 V l (full operating temperature range) 4
EN/UVLO Hysteresis Current -0.1 0 0.1 µA VEN/UVLO = 0.3V 4
EN/UVLO Hysteresis Current 2.2 2.5 2.9 µA VEN/UVLO = 1.1V 4
CTRL Latch-Off Threshold 285 300 315 mV Falling, l (full operating temperature range) 4
LOADEN Threshold 1.3 1.4 1.5 V Rising, l (full operating temperature range) 4
LOADTG On Voltage V(VOUT-LOADTG) 4.6 5 5.6 V VOUT = 12V 4
LOADTG Off Voltage V(VOUT-LOADTG) -0.1 0 0.1 V VOUT = 12V 4
Full Scale Current Regulation V(ISP-ISN) 97 100 103 mV VCTRL = 2V, VISP = 12V, l (full operating temperature range) 4
1/10th Current Regulation V(ISP-ISN) 8 10 12 mV VCTRL = 0.35V, VISP = 12V, l (full operating temperature range) 4
ISMON Monitor Output VISMON 1.2 1.25 1.3 V V(ISP-ISN) = 100mV, VISP = 12V/0V, l (full operating temperature range) 4
ISMON Monitor Output VISMON 0.3 0.35 0.4 V V(ISP-ISN) = 10mV, VISP = 12V/0V, l (full operating temperature range) 4
ISMON Monitor Output VISMON 0.2 0.25 0.3 V V(ISP-ISN) = 0mV, VISP = 12V/0V, l (full operating temperature range) 4
ISP/ISN Input Common Mode Range 0 60 V l (full operating temperature range) 4
FB Regulation Voltage FB 0.985 1 1.015 V VC = 1.2V, l (full operating temperature range) 4
Maximum Current Sense Threshold V(LSP-LSN) 35 50 65 mV Buck, VFB = 0.8V, l (full operating temperature range) 5
Maximum Current Sense Threshold V(LSP-LSN) 40 50 60 mV Boost, VFB = 0.8V, l (full operating temperature range) 5
FB Overvoltage Threshold VFB 1.08 1.1 1.12 V Rising, l (full operating temperature range) 5
FB Short Threshold VFB 0.24 0.25 0.26 V Falling, l (full operating temperature range) 5
PGOOD Upper Threshold Offset from VFB 8 10 12 % Rising, l (full operating temperature range) 5
PGOOD Lower Threshold Offset from VFB -12 -10 -8 % Falling, l (full operating temperature range) 5
SS Pull-Up Current 10.5 12.5 14.5 µA VFB = 0.4V, VSS = 0V 5
SS Pull-Down Current 1.05 1.25 1.45 µA VFB = 0.1V, VSS = 2V 5
Switching Frequency 190 200 210 kHz VSYNC/SPRD = 0V, RT = 226kΩ, l (full operating temperature range) 5
Switching Frequency 380 400 420 kHz VSYNC/SPRD = 0V, RT = 100kΩ, l (full operating temperature range) 5
Switching Frequency 570 600 630 kHz VSYNC/SPRD = 0V, RT = 59.0kΩ, l (full operating temperature range) 5
SYNC Frequency 150 650 kHz 5
Highest Spread Spectrum Above Oscillator Frequency 12.5 14.5 16.5 % VSYNC/SPRD = 5V 5
Lowest Spread Spectrum Below Oscillator Frequency -17.7 -15.7 -13.7 % VSYNC/SPRD = 5V 5
Buck-Boost to Boost region transition 0.73 0.75 0.77 VIN/VOUT 5
Boost to Buck-Boost region transition 0.83 0.85 0.87 VIN/VOUT 5
Buck to Buck-Boost region transition 1.16 1.18 1.2 VIN/VOUT 5
Buck-Boost to Buck region transition 1.31 1.33 1.35 VIN/VOUT 5
Peak-Buck to Peak-Boost region transition 0.96 0.98 1 VIN/VOUT 5
Peak-Boost to Peak-Buck region transition 1 1.02 1.04 VIN/VOUT 5
TG1 Minimum Duty Cycle in Buck Region 10 % Peak-Buck Current Mode 6
TG1 Maximum Duty Cycle in Buck Region 95 % Peak-Buck Current Mode 6
BG2 Minimum Duty Cycle in Boost Region 10 % Peak-Boost Current Mode 6
BG2 Maximum Duty Cycle in Boost Region 95 % Peak-Boost Current Mode 6
Junction-to-ambient thermal resistance (FE TSSOP package) θJA 30 °C/W FE package 2
Junction-to-case thermal resistance (FE TSSOP package) θJC 5 °C/W FE package 2

CAD (KiCad official)

  • Symbol: LT8390HFE#PBF
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
  • 3D model files: lt8390hfe-pbf-etched.step / lt8390hfe-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8390hfe-pbf.step / lt8390hfe-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (32 pp, sha256 bedb46ecab867bbe, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF