3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA1662AIDGKR
Texas Instruments · Audio Amplifiers · VSSOP-8
OPA1662AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier channel A, capable of rail-to-rail swing to within 0.6V of the supply rails into a 2kΩ load and sourcing/sinking up to ±30mA typical output current. |
| 2 | -IN A | input | Inverting input of amplifier channel A; input voltage must stay within (V-)+0.5V to (V+)-1V common-mode range and input current must not exceed ±10mA. |
| 3 | +IN A | input | Non-inverting input of amplifier channel A; input voltage must stay within (V-)+0.5V to (V+)-1V common-mode range and input current must not exceed ±10mA. |
| 4 | V- | power_in | Negative supply pin; device operates from ±1.5V to ±18V dual supply (or 3V to 36V single supply), with absolute maximum total supply voltage VS = (V+)-(V-) of 40V. |
| 5 | +IN B | input | Non-inverting input of amplifier channel B; input voltage must stay within (V-)+0.5V to (V+)-1V common-mode range and input current must not exceed ±10mA. |
| 6 | -IN B | input | Inverting input of amplifier channel B; input voltage must stay within (V-)+0.5V to (V+)-1V common-mode range and input current must not exceed ±10mA. |
| 7 | OUT B | output | Output of amplifier channel B, capable of rail-to-rail swing to within 0.6V of the supply rails into a 2kΩ load and sourcing/sinking up to ±30mA typical output current. |
| 8 | V+ | power_in | Positive supply pin; device operates from ±1.5V to ±18V dual supply (or 3V to 36V single supply), with absolute maximum total supply voltage VS = (V+)-(V-) of 40V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+) – (V–), recommended | VS | 1.5 | 18 | V | Printed as ±1.5 V to ±18 V | 3 | |
| Ambient temperature, recommended | TA | -40 | 85 | °C | 3 | ||
| Supply voltage, absolute maximum | VS | 40 | V | VS = (V+) – (V–) | 3 | ||
| Input voltage, absolute maximum | -0.5 | 0.5 | V | Relative to rails: min (V–) – 0.5 V, max (V+) + 0.5 V | 3 | ||
| Input current (all pins except supply pins), absolute maximum | -10 | 10 | mA | 3 | |||
| Operating temperature, absolute maximum | TA | -55 | 125 | °C | 3 | ||
| Junction temperature, absolute maximum | TJ | 150 | °C | 3 | |||
| Storage temperature, absolute maximum | Tstg | -65 | 150 | °C | 3 | ||
| ESD human body model (HBM) | V(ESD) | 2000 | V | ANSI/ESDA/JEDEC JS-001 | 3 | ||
| ESD charged device model (CDM) | V(ESD) | 1000 | V | JEDEC JESD22-C101 | 3 | ||
| ESD machine model (MM) | V(ESD) | 200 | V | 3 | |||
| Input offset voltage (VS=±15V) | VOS | -1.5 | 1.5 | mV | VS = ±1.5V to ±18V; printed typ ±0.5 not used as a column value | 5 | |
| Input offset voltage drift (VS=±15V) | 2 | 8 | μV/°C | VS = ±1.5V to ±18V, TA = –40°C to +85°C | 5 | ||
| Power supply rejection ratio (VS=±15V) | PSRR | 1 | 3 | μV/V | VS = ±1.5V to ±18V | 5 | |
| Input bias current (VS=±15V) | IB | 600 | 1200 | nA | VCM = 0V | 5 | |
| Input offset current (VS=±15V) | IOS | -100 | 100 | nA | VCM = 0V | 5 | |
| Common-mode voltage range (VS=±15V) | VCM | 0.5 | -1 | V | Relative to rails: min (V–) + 0.5 V, max (V+) – 1 V | 5 | |
| Common-mode rejection ratio (VS=±15V) | CMRR | 106 | 114 | dB | 5 | ||
| Open-loop voltage gain (VS=±15V) | AOL | 106 | 114 | dB | (V–) + 0.6V ≤ VO ≤ (V+) – 0.6V, RL = 2kΩ | 5 | |
| Output voltage swing (VS=±15V) | VOUT | 0.6 | -0.6 | V | RL = 2kΩ; relative to rails: (V–) + 0.6 V to (V+) – 0.6 V | 5 | |
| Short-circuit current (VS=±15V) | ISC | -50 | 50 | mA | One channel at a time | 5 | |
| Quiescent current per channel (VS=±15V) | IQ | 1.5 | 1.8 | mA | IOUT = 0A | 5 | |
| Quiescent current per channel over temperature (VS=±15V) | IQ | 2 | mA | IOUT = 0A, TA = -40°C to +85°C | 5 | ||
| Common-mode rejection ratio (VS=5V) | CMRR | 86 | 100 | dB | 6 | ||
| Open-loop voltage gain (VS=5V) | AOL | 90 | 100 | dB | (V–) + 0.6V ≤ VO ≤ (V+) – 0.6V, RL = 2kΩ | 6 | |
| Input offset voltage (VS=5V) | VOS | -1.5 | 1.5 | mV | VS = ±1.5V to ±18V; printed typ ±0.5 not used as a column value | 6 | |
| Input offset voltage drift (VS=5V) | 2 | 8 | μV/°C | VS = ±1.5V to ±18V, TA = –40°C to +85°C | 6 | ||
| Power supply rejection ratio (VS=5V) | PSRR | 1 | 3 | μV/V | VS = ±1.5V to ±18V | 6 | |
| Input bias current (VS=5V) | IB | 600 | 1200 | nA | VCM = 0V | 6 | |
| Input offset current (VS=5V) | IOS | -100 | 100 | nA | VCM = 0V | 6 | |
| Common-mode voltage range (VS=5V) | VCM | 0.5 | -1 | V | Relative to rails: min (V–) + 0.5 V, max (V+) – 1 V | 6 | |
| Output voltage swing (VS=5V) | VOUT | 0.6 | -0.6 | V | RL = 2kΩ; relative to rails: (V–) + 0.6 V to (V+) – 0.6 V | 6 | |
| Short-circuit current (VS=5V) | ISC | -40 | 40 | mA | One channel at a time | 6 | |
| Quiescent current per channel (VS=5V) | IQ | 1.4 | 1.7 | mA | IOUT = 0A | 7 | |
| Quiescent current per channel over temperature (VS=5V) | IQ | 2 | mA | IOUT = 0A, TA = -40°C to +85°C | 7 | ||
| Junction-to-ambient thermal resistance, DGK (VSSOP-8) | RθJA | 225.4 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance, DGK (VSSOP-8) | RθJCtop | 78.8 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board thermal resistance, DGK (VSSOP-8) | RθJB | 110.5 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-top characterization parameter, DGK (VSSOP-8) | ψJT | 14.6 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board characterization parameter, DGK (VSSOP-8) | ψJB | 108.5 | °C/W | DGK (VSSOP) 8-pin package | 4 |
CAD (KiCad official)
- Symbol:
OPA1662AIDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
opa1662aidgkr-etched.step/opa1662aidgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa1662aidgkr.step/opa1662aidgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
5f75876ac956bff7, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).