Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMKDB1108Z85RKPR

Texas Instruments · IC · VQFN-40(5x5)

LMKDB1108Z85RKPR from Texas Instruments, in a VQFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LOS# output Open-drain loss-of-input-clock status output, requires an external pullup resistor; low = invalid input clock, high = valid input clock.
2 ^SLEWRATE_SEL input LP-HCSL output slew rate select input with internal pullup; low = slow slew rate, high = fast slew rate.
3 ^vSADR1_tri input SMBus address 3-level input with internal pullup and pulldown resistors.
4 ^vSADR0_tri input SMBus address 3-level input with internal pullup and pulldown resistors.
5 SMB_DATA bidirectional SMBus data line, requires an external pullup resistor, no connect if unused.
6 SMB_CLK input SMBus clock input, requires an external pullup resistor, no connect if unused.
7 VDDA power_in Analog power supply; additional power supply filtering is recommended (see Section 10.3).
8 CLKIN_P input Positive side of the differential clock input.
9 CLKIN_N input Negative side of the differential clock input.
10 VDDCLK power_in Output power supply.
11 vSBI_EN input SBI enable input with internal pulldown, state must not be changed after power-up; low at power-up = SBI disabled, high at power-up = SBI enabled with SMBus and other OE pins remaining functional.
12 vPWRGD/PWRDN# input Multifunction input with internal pulldown that acts as power good on the first low-to-high transition and as active-low power down afterwards (low = power-down mode, high = normal operation).
13 VDDCLK power_in Output power supply.
14 vOE0#/SHFT_LD# input Active-low output enable for CLK0 (0 = active, 1 = inactive) or SBI active-low shift register load input depending on SBI_EN, with internal pulldown.
15 CLK0_P output LP-HCSL differential clock output 0 positive, no connect if unused.
16 CLK0_N output LP-HCSL differential clock output 0 negative, no connect if unused.
17 CLK1_P output LP-HCSL differential clock output 1 positive, no connect if unused.
18 CLK1_N output LP-HCSL differential clock output 1 negative, no connect if unused.
19 vOE1#/SBI_IN input Active-low output enable for CLK1 (0 = active, 1 = inactive) or SBI data input depending on SBI_EN, with internal pulldown.
20 VDDCLK power_in Output power supply.
21 vOE2# input Active-low output enable for CLK2 with internal pulldown; 0 = output active, 1 = output inactive.
22 CLK2_P output LP-HCSL differential clock output 2 positive, no connect if unused.
23 CLK2_N output LP-HCSL differential clock output 2 negative, no connect if unused.
24 CLK3_P output LP-HCSL differential clock output 3 positive, no connect if unused.
25 CLK3_N output LP-HCSL differential clock output 3 negative, no connect if unused.
26 VDDCLK power_in Output power supply.
27 vOE3# input Active-low output enable for CLK3 with internal pulldown; 0 = output active, 1 = output inactive.
28 CLK4_P output LP-HCSL differential clock output 4 positive, no connect if unused.
29 CLK4_N output LP-HCSL differential clock output 4 negative, no connect if unused.
30 vOE4#/SBI_CLK input Active-low output enable for CLK4 (0 = active, 1 = inactive) or SBI clock input depending on SBI_EN, with internal pulldown.
31 CLK5_P output LP-HCSL differential clock output 5 positive, no connect if unused.
32 CLK5_N output LP-HCSL differential clock output 5 negative, no connect if unused.
33 vOE5# input Active-low output enable for CLK5 with internal pulldown; 0 = output active, 1 = output inactive.
34 vOE6#/SBI_OUT bidirectional Active-low output enable input for CLK6 (0 = active, 1 = inactive) or SBI shift register data output depending on SBI_EN, with internal pulldown.
35 CLK6_P output LP-HCSL differential clock output 6 positive, no connect if unused.
36 CLK6_N output LP-HCSL differential clock output 6 negative, no connect if unused.
37 VDDCLK power_in Output power supply.
38 CLK7_P output LP-HCSL differential clock output 7 positive, no connect if unused.
39 CLK7_N output LP-HCSL differential clock output 7 negative, no connect if unused.
40 vOE7# input Active-low output enable for CLK7 with internal pulldown; 0 = output active, 1 = output inactive.
41 Thermal Pad (GND) power_in Device ground, thermal pad.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-40(5x5)
Category
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDDx Supply voltage on any VDD pin VDDx -0.3 3.63 V 22
VIN Input voltage on CLKIN and digital input pins VIN -0.3 3.63 V 22
Output current - continuous (CLKOUT) IOUT 30 mA 22
Output current - continuous (SMB_DATA, SBI_OUT) IOUT 25 mA 22
Output current - surge (CLKOUT) IOUT 60 mA 22
Output current - surge (SMB_DATA, SBI_OUT) IOUT 50 mA 22
Storage temperature TS -65 150 ℃ 22
Junction temperature TJ 125 °C 22
Ambient temperature TA -40 105 °C 22
Power supply voltage (3.3 V row) VDD 2.97 3.3 3.6 V 22
Power supply voltage (1.8 V row) VDD 1.71 1.8 1.89 V 22
Input voltage on CLKIN and digital input pins (recommended) VIN -0.3 3.6 V 22
Power ramping time tramp 0.05 5 ms 22
Clock input crossing point voltage VIN,cross 100 1400 mV 23
Clock input duty cycle DCIN 45 55 % 23
Differential clock input amplitude (half of differential peak-peak voltage) VIN 200 2000 mV f0 ≤ 300MHz 23
Differential clock input amplitude (half of differential peak-peak voltage) VIN 250 2000 mV 300MHz < f0 ≤ 400MHz 23
Output voltage high VOH,AC 670 820 mV Output swing programmed to 750mV. DB2000QL AC test load 23
Output voltage low VOL,AC -100 100 mV 23
Output max voltage (including overshoot) Vmax,AC 670 920 mV 23
Output min voltage (including undershoot) Vmin,AC -100 100 mV 23
Output voltage high VOH,AC 870 1020 mV Output swing programmed to 950mV 23
Output max voltage (including overshoot) Vmax,AC 870 1120 mV 23
Output voltage high with DC test load VOH,DC 225 270 mV DB2000QL DC test load 23
Output voltage low with DC test load VOL,DC 10 150 mV 23
Output overshoot voltage with DC test load Vovs,DC 75 mV 23
Output undershoot voltage with DC test load Vuds,DC -75 mV 23
Differential output impedance Zdiff 80.75 85 89.25 Ω Measured at VOL/VOH, VDD = 3.3V 23
Differential output impedance Zdiff 81 85 90 Ω Measured at VOL/VOH, VDD = 1.8V 23
Differential output impedance - crossing Zdiff-crossing 68 85 102 Ω Measured during transition 23
Output slew rate dV/dt 1.5 2.2 V/ns Measured from -150mV to +150mV on the differential waveform. Lowest slew rate 23
Output slew rate dV/dt 1.8 2.6 V/ns Measured from -150mV to +150mV on the differential waveform. Low slew rate 23
Output slew rate dV/dt 2 2.9 V/ns Measured from -150mV to +150mV on the differential waveform. High slew rate (default) 23
Output slew rate dV/dt 2.4 4 V/ns Measured from -150mV to +150mV on the differential waveform. Highest slew rate 23
Rising edge rate to falling edge rate matching DB2000QL AC test load ∆dV/dt 10 % 23
Duty cycle distortion DCD -1 1 % Measured on the differential waveform. Input duty cycle = 50% 23
Absolute crossing point voltage Vcross,AC 250 550 mV DB2000QL AC test load 23
Absolute crossing point voltage Vcross,DC 130 200 mV DB2000QL DC test load 23
Variation of Vcross over all clock edges ∆Vcross,AC 140 mV DB2000QL AC test load 23
Absolute value of ring back voltage as defined in PCIe /VRB/ 100 mV DB2000QL AC test load 23
Output voltage low VOL -120 120 mV 26
Output voltage high VOH 780 980 mV Output swing programmed to 900mV. f0 = 156.25MHz or 312.5MHz 26
Rise/fall time on single-ended waveform, 20% to 80% tR, tF 340 ps Output swing programmed to 800mV. Fastest slew rate. f0 = 156.25MHz or 312.5MHz 26
Operating frequency f0 1 400 MHz Automatic Output Disable functionality is disabled 26
Startup time tstartup 0.4 ms Cold start, f0 ≥ 100MHz 26
Output enable/disable time tOE 4 10 clk Time elapsed from OE assertion/deassertion to output clock starts/stops 26
LOS# assertion time tLOS-assert 120 ns Time elapsed from loss of input clock to LOS# assertion. f0 < 100MHz 26
LOS# deassertion time tLOS-deassert 340 ns Time elapsed from presence of input clock to LOS# deassertion. f0 < 100MHz 26
Output-to-output skew tskew 50 ps Same bank 27
Total supply current LMKDB1108 IDD,total 85.7 mA All outputs running, f0 = 100MHz 30
Core supply current LMKDB1108 IDD,core 36.3 mA Pin PWRGD/PWRDN# = high, all outputs disabled 31
Power down current LMKDB1108 IPD 5.6 mA Pin PWRGD/PWRDN# = low 31
Junction-to-ambient thermal resistance (RKP0040 VQFN) RθJA 33.6 °C/W RKP0040 (VQFN), 40 pins 22
Junction-to-case (top) thermal resistance (RKP0040 VQFN) RθJC(top) 24.6 °C/W RKP0040 (VQFN), 40 pins 22
Junction-to-board thermal resistance (RKP0040 VQFN) RθJB 13.8 °C/W RKP0040 (VQFN), 40 pins 22
Junction-to-top characterization parameter (RKP0040 VQFN) ΨJT 0.4 °C/W RKP0040 (VQFN), 40 pins 22
Junction-to-board characterization parameter (RKP0040 VQFN) ΨJB 13.7 °C/W RKP0040 (VQFN), 40 pins 22
Junction-to-case (bottom) thermal resistance (RKP0040 VQFN) RθJC(bot) 4.2 °C/W RKP0040 (VQFN), 40 pins 22

CAD (KiCad official)

  • Symbol: LMKDB1108Z85RKPR
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: VQFN-40(5x5) (KiCad packages3D, STEP)
  • 3D model files: lmkdb1108z85rkpr-etched.step / lmkdb1108z85rkpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmkdb1108z85rkpr.step / lmkdb1108z85rkpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (129 pp, sha256 86848eb78ae2d928, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF