component
GP8201S-TC50-EW
Public Made by Adomby adom
Guestgood ADCs/DACs - Special Purpose, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGP8201S-TC50-EW
Guestgood · ADCs/DACs - Special Purpose · ESOP-8
GP8201S-TC50-EW from Guestgood, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | I2C protocol clock input; logic high level 2.7V-5.5V, up to 400 kHz. |
| 2 | SDA | bidirectional | I2C protocol data line; logic high level 2.7V-5.5V. |
| 3 | NC | unconnected | No connect, left floating. |
| 4 | VCC | power_in | Power supply, 9V to 36V (12V typical). |
| 5 | GND | power_in | Ground. |
| 6 | VOUT | output | Analog voltage output, 0-5V or 0-10V selected by SEL, up to 15 mA when VOUT>0.5V at VCC=12V. |
| 7 | SEL | input | Output range select: connect to GND for 0-5V, connect to V5V for 0-10V. |
| 8 | V5V | power_out | Internal LDO 5V output; an external capacitor of at least 1uF is required. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Guestgood |
| Package | ESOP-8 |
| Category | Data Acquisition |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (电源电压) | VCC | 9 | 12 | 36 | V | 7 | |
| Output voltage, 0-5V range (输出电压) | VOUT | 0 | 5 | V | SEL接地 | 7 | |
| Output voltage, 0-10V range (输出电压) | VOUT | 0 | 10 | V | SEL接V5V | 7 | |
| Output voltage error, ratio to VOUT range (输出电压误差) | ΔVOUT | 0.2 | % | 7 | |||
| Power supply current (电源功耗) | ICC | 1.5 | 2 | mA | VCC @12V 空载 | 7 | |
| I2C clock frequency (I2C时钟频率) | fsclk | 400 | K Hz | 7 | |||
| Output linearity error (输出线性度) | Lout | 0.1 | % | 7 | |||
| VOUT output current (VOUT输出电流) | IOUT | 15 | mA | VOUT>0.5V; @VCC=12V | 7 | ||
| Industrial operating temperature (工业操作温度) | -40 | 85 | ℃ | 2 | |||
| Storage temperature (储存温度) | -50 | 125 | ℃ | 2 | |||
| Input voltage (输入电压) | -0.3 | V | upper limit printed as VCC + 0.3 V | 2 | |||
| Maximum voltage (最大电压) | 36 | V | 2 | ||||
| ESD protection (ESD 保护) | 2000 | V | printed as > 2000 V; test model not stated | 2 | |||
| Input high level, I2C (输入I2C信号高电平) | 2.7 | 5.5 | V | 1 | |||
| Startup time (启动时间) | 2 | ms | printed as <2 ms | 1 | |||
| Temperature coefficient (温度系数, ordering table) | 50 | PPM/℃ | ordering code GP8201S-TC50-EW | 8 |
CAD (KiCad official)
- Symbol:
GP8201S-TC50-EW - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
gp8201s-tc50-ew-etched.step/gp8201s-tc50-ew-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gp8201s-tc50-ew.step/gp8201s-tc50-ew.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Guestgood datasheet (9 pp, sha256
e019a3e3571e0738, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).