component
SL9062C
Public Made by Adomby adom
Slkor SLKORMICRO Elec Operational Amplifier, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL9062C
Slkor SLKORMICRO Elec · Operational Amplifier · SOP-8
SL9062C from Slkor SLKORMICRO Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1; the output swings to within about 10 mV of either supply rail with a 10 kΩ load (typical). |
| 2 | IN1- | input | Inverting input of amplifier 1; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 3 | IN1+ | input | Non-inverting input of amplifier 1; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 4 | V- | power_in | Negative supply or ground; supply is specified as Vs = (V+) - (V-) from 1.5 V to 5.5 V. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 6 | IN2- | input | Inverting input of amplifier 2; the common-mode input range extends from (V-)-0.1 V to (V+)+0.1 V. |
| 7 | OUT2 | output | Output of amplifier 2; the output swings to within about 10 mV of either supply rail with a 10 kΩ load (typical). |
| 8 | V+ | power_in | Positive supply; supply is specified as Vs = (V+) - (V-) from 1.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor SLKORMICRO Elec |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+)-(V-) | Vs | 1.5 | 5.5 | V | 8 | ||
| Operating ambient temperature | Ta | -40 | 125 | °C | 8 | ||
| Quiescent current per amplifier | Iq | 400 | 500 | μA | Vs=5.5V, Io=0mA | 8 | |
| Quiescent current per amplifier, all temperature | Iq | 600 | μA | all temp | 8 | ||
| Input offset voltage | Vos | -2 | 0.5 | 2 | mV | 8 | |
| Input offset voltage, all temperature | Vos | -3 | 3 | mV | all temp | 8 | |
| Input offset voltage drift | dVos/dT | -0.5 | 0.5 | μV/°C | all temp | 8 | |
| Input bias current | Ib | -0.5 | 0.5 | pA | 8 | ||
| Input offset current | Ios | -0.05 | 0.05 | pA | 8 | ||
| Short circuit current | Isc | -50 | 50 | mA | 9 | ||
| Voltage output swing from supply rails | Vo | 5 | 10 | mV | RL=10kΩ | 9 | |
| Voltage output swing from supply rails | Vo | 15 | 30 | mV | RL=2kΩ | 9 | |
| Supply voltage (V+)-(V-) | Vs | -0.3 | 6 | V | 7 | ||
| Junction temperature | Tj | 150 | °C | 7 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 7 | ||
| ESD (HBM), all pins | -6000 | 6000 | V | 7 | |||
| ESD (CDM), all pins | -500 | 500 | V | 7 | |||
| Latch-up current, all pins | 100 | mA | JESD78, Class A | 7 | |||
| Power supply rejection ratio | PSRR | 100 | dB | At DC | 8 | ||
| Channel separation | Csep | 120 | dB | At DC | 8 | ||
| Common mode rejection ratio | CMRR | 100 | dB | At DC | 8 | ||
| Input voltage noise (20Hz to 20kHz) | En | 1.5 | μV | f=20Hz to 20kHz | 8 | ||
| Input voltage noise density | en | 7 | nV/√Hz | f=10kHz | 8 | ||
| Input voltage noise density | en | 15 | nV/√Hz | f=1kHz | 8 | ||
| Differential input capacitance | Cid | 2 | pF | 8 | |||
| Common mode input capacitance | Cic | 4 | pF | 8 | |||
| Open loop voltage gain | Aol | 110 | dB | 8 | |||
| Gain bandwidth product | GBP | 25 | MHz | G=+1, CL=10pF | 8 | ||
| Phase margin | φ | 60 | o | G=+1, CL=10pF | 8 | ||
| Capacitive load | Cload | 1 | nF | G=+1 | 8 | ||
| Slew rate | SR | 8 | V/μs | G=+1, CL=100pF | 8 | ||
| Settling time | Ts | 0.5 | μs | To 0.1%, 2V step, G=+1, CL=100pF | 9 | ||
| Overload recovery time | Tor | 50 | ns | VIN x gain > Vs, CL=100pF | 9 | ||
| Total harmonic distortion + noise | THD+N | 100 | dB | Vs=5.5V, Vcm=2.5V, Vo=1Vrms, G=+1, f=1kHz; 3rd order filter, BW=80kHz at -3dB | 9 | ||
| Signal to noise ratio | SNR | 110 | dB | 9 | |||
| Open loop output impedance | Zo | 100 | Ω | f=10MHz | 9 | ||
| Thermal resistance junction-to-ambient (SOP8) | Rth j-amb | 136 | °C/W | 7 | |||
| Thermal resistance junction-to-case (SOP8) | Rth j-case | 77 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
SL9062C - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sl9062c-etched.step/sl9062c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl9062c.step/sl9062c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor SLKORMICRO Elec datasheet (23 pp, sha256
79e26cd7ef613a72, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).