3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25L3206EMI-12G
MXIC(Macronix) · Pre-ordered Products · SOIC-16-300mil
MX25L3206EMI-12G from MXIC(Macronix), in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HOLD# | input | Hold pauses the device without deselecting it. |
| 2 | VCC | power_in | Power supply, +3.3V. |
| 3 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 4 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 5 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 6 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 7 | CS# | input | Chip Select input; serial access to the device is enabled by CS# input. |
| 8 | SO/SIO1 | bidirectional | Serial Data Output (for 1 x I/O), and Serial Data Output for Dual Output mode (SIO1). |
| 9 | WP# | input | Write protection input. |
| 10 | GND | power_in | Ground. |
| 11 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 12 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 13 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 14 | NC | unconnected | Not connected; the datasheet pin description table lists no function for this pin. |
| 15 | SI/SIO0 | bidirectional | Serial Data Input (for 1 x I/O), and serial data input and output for Dual Output mode (SIO0). |
| 16 | SCLK | input | Clock Input for serial interface timing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOIC-16-300mil |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 33 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 33 | |
| VCC Standby Current | ISB1 | 15 | 40 | uA | VIN = VCC or GND, CS# = VCC | 33 | |
| Deep Power-down Current | ISB2 | 20 | uA | VIN = VCC or GND, CS# = VCC | 33 | ||
| VCC Read Current | ICC1 | 25 | mA | f=86MHz, fT=80MHz (2 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 33 | ||
| VCC Read Current | ICC1 | 20 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 33 | ||
| VCC Read Current | ICC1 | 10 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 33 | ||
| VCC Program Current (PP) | ICC2 | 15 | 20 | mA | Program in Progress, CS# = VCC | 33 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 20 | mA | Program status register in progress, CS#=VCC | 33 | ||
| VCC Sector Erase Current (SE) | ICC4 | 9 | 20 | mA | Erase in Progress, CS#=VCC | 33 | |
| VCC Chip Erase Current (CE) | ICC5 | 15 | 20 | mA | Erase in Progress, CS#=VCC | 33 | |
| Input Low Voltage | VIL | -0.5 | V | 33 | |||
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 33 | ||
| Clock Frequency for FAST_READ, RDSFDP, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | 86 | MHz | 34 | |||
| Clock Frequency for READ instructions | fRSCLK | 33 | MHz | READ instructions | 34 | ||
| Clock Frequency for DREAD instructions | fTSCLK | 80 | MHz | DREAD instructions | 34 | ||
| Clock High Time | tCH | 5.5 | ns | fC=86MHz | 34 | ||
| Clock High Time | tCH | 13 | ns | fR=33MHz | 34 | ||
| Clock Low Time | tCL | 5.5 | ns | fC=86MHz | 34 | ||
| Clock Low Time | tCL | 13 | ns | fR=33MHz | 34 | ||
| Clock Rise Time (peak to peak) | tCLCH | 0.1 | V/ns | expressed as slew-rate | 34 | ||
| Clock Fall Time (peak to peak) | tCHCL | 0.1 | V/ns | expressed as slew-rate | 34 | ||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 7 | ns | 34 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 7 | ns | 34 | |||
| Data In Setup Time | tDVCH | 2 | ns | 34 | |||
| Data In Hold Time | tCHDX | 5 | ns | 34 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | ns | 34 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | ns | 34 | |||
| CS# Deselect Time | tSHSL | 15 | ns | Read | 34 | ||
| CS# Deselect Time | tSHSL | 40 | ns | Write | 34 | ||
| Output Disable Time | tSHQZ | 8 | ns | 34 | |||
| Clock Low to Output Valid | tCLQV | 6 | ns | 15pF loading | 34 | ||
| Output Hold Time | tCLQX | 0 | ns | 34 | |||
| HOLD# Setup Time (relative to SCLK) | tHLCH | 5 | ns | 34 | |||
| HOLD# Hold Time (relative to SCLK) | tCHHH | 5 | ns | 34 | |||
| HOLD Hold Time | tCHHL | 5 | ns | 34 | |||
| HOLD to Output Low-Z | tHHQX | 8 | ns | 34 | |||
| HOLD# to Output High-Z | tHLQZ | 8 | ns | 34 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | applicable when SRWD=1 (WRSR) | 34 | ||
| Write Protect Hold Time | tSHWL | 100 | ns | applicable when SRWD=1 (WRSR) | 34 | ||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 34 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 8.8 | us | 34 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 8.8 | us | 34 | |||
| Write Status Register Cycle Time | tW | 5 | 40 | ms | 34 | ||
| Byte-Program Cycle Time | tBP | 9 | 50 | us | 34 | ||
| Page Program Cycle Time | tPP | 0.6 | 3 | ms | 34 | ||
| Sector Erase Cycle Time | tSE | 40 | 200 | ms | 34 | ||
| Block Erase Cycle Time | tBE | 0.4 | 2 | s | 34 | ||
| Chip Erase Cycle Time | tCE | 12.5 | 40 | s | 34 | ||
| Ambient Operating Temperature | TA | -40 | 85 | °C | Industrial grade | 31 | |
| Storage Temperature | TSTORE | -55 | 125 | °C | 31 | ||
| Applied Input Voltage | VIN | -0.5 | 4.6 | V | 31 | ||
| Applied Output Voltage | VOUT | -0.5 | 4.6 | V | 31 | ||
| VCC to Ground Potential | VCC | -0.5 | 4.6 | V | 31 | ||
| Single Power Supply Operation | VCC | 2.7 | 3.6 | V | read, erase, and program operations | 5 | |
| VCC(min) to CS# low | tVSL | 200 | us | 46 | |||
| VCC Rise Time | tVR | 20 | 500000 | us/V | 47 |
CAD (KiCad official)
- Symbol:
MX25L3206EMI-12G - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mx25l3206emi-12g-etched.step/mx25l3206emi-12g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l3206emi-12g.step/mx25l3206emi-12g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet, copy hosted by LCSC (59 pp, sha256
313e413e317b0e22, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).