component
BQ2002ESNTR
Public Made by Adomby adom
Texas Instruments Battery Management, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ2002ESNTR
Texas Instruments · Battery Management · SOIC-8
BQ2002ESNTR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TM | input | Three-level input that controls the fast charge safety timer, voltage termination mode, top-off, pulse-trickle, and voltage hold-off time. |
| 2 | LED | tri_state | Open-drain output that indicates the charging status. |
| 3 | BAT | input | Battery voltage sense input created via high-impedance resistor divider network between the positive and negative battery terminals. |
| 4 | VSS | power_in | System ground. |
| 5 | CC | tri_state | Open-drain output for charging current control; high-Z enables charging, low inhibits charging; modulated for top-off and pulse trickle. |
| 6 | INH | input | Charge inhibit input; when high, suspends fast charge in progress; when returned low, resumes operation from suspension point. |
| 7 | VCC | power_in | Supply voltage input, 5.0V ±20%. |
| 8 | TS | input | Temperature sense input for external battery temperature monitoring thermistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
BQ2002ESNTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
bq2002esntr-etched.step/bq2002esntr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq2002esntr.step/bq2002esntr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
0b96a743b6d3dbfa, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).