Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM4050BIM3X-5.0

Texas Instruments · Voltage References · SOT-23-3

LM4050BIM3X-5.0 from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Cathode bidirectional Shunt current and input voltage pin; reverse current is limited to 20 mA absolute maximum, and all versions have a maximum operating current of 15 mA.
2 Anode output Common pin, normally connected to ground; forward current is limited to 10 mA absolute maximum.
3 NC unconnected No internal connection; per the datasheet footnote this pin must be left floating or connected to pin 2 (Anode).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse breakdown voltage tolerance, B grade, 25°C VR -10 10 mV IR = 100 μA 8
Reverse breakdown voltage tolerance, B grade, industrial range VR -27 27 mV Industrial Temp. Range, TA = TJ = TMIN to TMAX 8
Minimum operating current IRMIN 56 74 μA TA = TJ = 25°C 8
Minimum operating current, industrial range IRMIN 80 μA Industrial Temp. Range, TA = TJ = TMIN to TMAX 8
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -30 30 ppm/°C IR = 10 mA 8
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -20 20 ppm/°C IR = 1 mA 8
Average reverse breakdown voltage temperature coefficient ΔVR/ΔT -50 50 ppm/°C IR = 100 μA, TA = TJ = TMIN to TMAX 8
Reverse breakdown voltage change with operating current ΔVR/ΔIR 0.2 1 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = 25°C 8
Reverse breakdown voltage change with operating current ΔVR/ΔIR 1.4 mV IRMIN ≤ IR ≤ 1 mA, TA = TJ = TMIN to TMAX 8
Reverse breakdown voltage change with operating current ΔVR/ΔIR 2 8 mV 1 mA ≤ IR ≤ 15 mA, TA = TJ = 25°C 8
Reverse breakdown voltage change with operating current ΔVR/ΔIR 12 mV 1 mA ≤ IR ≤ 15 mA, TA = TJ = TMIN to TMAX 8
Ambient temperature range, industrial TA -40 85 °C Industrial Temperature Range 4
Junction temperature range, industrial TJ -40 85 °C Industrial Temperature Range 4
Reverse current IR 20 mA 3
Forward current IF 10 mA 3
Power dissipation PD 280 mW TA = 25°C 3
Maximum junction temperature TJ 150 °C 3
Storage temperature Tstg -65 150 °C 3
Junction-to-ambient thermal resistance RθJA 287 °C/W DBZ (SOT-23) package 4
Junction-to-case (top) thermal resistance RθJC(top) 106.6 °C/W DBZ (SOT-23) package 4
Junction-to-board thermal resistance RθJB 57.7 °C/W DBZ (SOT-23) package 4
Junction-to-top characterization parameter ψJT 5.5 °C/W DBZ (SOT-23) package 4
Junction-to-board characterization parameter ψJB 56.4 °C/W DBZ (SOT-23) package 4
Reverse breakdown voltage (nominal) 5 V IR = 100 μA 8
Wideband noise eN 93 μVrms IR = 100 μA, 10 Hz ≤ f ≤ 10 kHz 8
Reverse dynamic impedance ZR 0.5 Ω IR = 1 mA, f = 120 Hz, IAC = 0.1 IR 8
Reverse breakdown voltage long term stability ΔVR 120 ppm t = 1000 hrs, T = 25°C ±0.1°C, IR = 100 μA 8
Thermal hysteresis VHYST 1.4 mV ΔT = −40°C to 125°C 8

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM4050BIM3X-5.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm4050bim3x-5-0-etched.step / lm4050bim3x-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm4050bim3x-5-0.step / lm4050bim3x-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 661b4c871b0c8c5b, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF