3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP2904DR
Texas Instruments · Operational Amplifier · SOIC-8
LP2904DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 output; the datasheet states the output cannot drive to either rail, and a short circuit to ground at or below TA = 25°C with VCC ≤ 15 V is unlimited in duration, while shorts to VCC can cause excessive heating and eventual destruction. |
| 2 | 1IN- | input | Channel 1 inverting input; the input voltage is rated -0.3 V to 32 V, and if either input is below -0.3 V the input current must be limited to 1 mA. |
| 3 | 1IN+ | input | Channel 1 noninverting input; the valid common-mode range is device ground to VCC - 1.5 V. |
| 4 | GND | power_in | Ground or negative power supply; the datasheet notes split-supply operation is also possible. |
| 5 | 2IN+ | input | Channel 2 noninverting input; the valid common-mode range is device ground to VCC - 1.5 V. |
| 6 | 2IN- | input | Channel 2 inverting input; the input voltage is rated -0.3 V to 32 V, and if either input is below -0.3 V the input current must be limited to 1 mA. |
| 7 | 2OUT | output | Channel 2 output; the datasheet states the output cannot drive to either rail, and a short circuit to ground at or below TA = 25°C with VCC ≤ 15 V is unlimited in duration, while shorts to VCC can cause excessive heating and eventual destruction. |
| 8 | VCC | power_in | Positive power supply; recommended supply range is 3 V to 32 V, and supply voltages above 32 V can permanently damage the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 4 | mV | TA = 25°C; VCC = 5 V, VIC = VCC/2, RL = 100 kΩ to GND | 6 | |
| Input offset voltage | VIO | 10 | mV | TA = Full range (-40°C to 85°C); VCC = 5 V, VIC = VCC/2, RL = 100 kΩ to GND | 6 | ||
| Input bias current | IIB | 2 | 20 | nA | TA = 25°C; VCC = 5 V, VIC = VCC/2, RL = 100 kΩ to GND | 6 | |
| Input bias current | IIB | 40 | nA | TA = Full range (-40°C to 85°C); VCC = 5 V, VIC = VCC/2, RL = 100 kΩ to GND | 6 | ||
| Input offset current | IIO | 0.5 | 4 | nA | TA = 25°C; VCC = 5 V, VIC = VCC/2, RL = 100 kΩ to GND | 6 | |
| Input offset current | IIO | 8 | nA | TA = Full range (-40°C to 85°C); VCC = 5 V, VIC = VCC/2, RL = 100 kΩ to GND | 6 | ||
| Large-signal voltage gain | AV | 40 | 70 | V/mV | TA = 25°C; RL = 10 kΩ to GND, VCC = 30 V | 6 | |
| Large-signal voltage gain | AV | 30 | V/mV | TA = Full range (-40°C to 85°C); RL = 10 kΩ to GND, VCC = 30 V | 6 | ||
| Common-mode rejection ratio | CMRR | 80 | 90 | dB | TA = 25°C; VCC = 30 V, VIC = 0 V to VCC, 1.5 V | 6 | |
| Common-mode rejection ratio | CMRR | 75 | dB | TA = Full range (-40°C to 85°C); VCC = 30 V, VIC = 0 V to VCC, 1.5 V | 6 | ||
| Power-supply rejection ratio | kVSR | 80 | 90 | V | TA = 25°C; VCC = 5 V to 30 V | 6 | |
| Power-supply rejection ratio | kVSR | 75 | V | TA = Full range (-40°C to 85°C); VCC = 5 V to 30 V | 6 | ||
| Supply current | ICC | 54 | 75 | µA | TA = 25°C; RL = ∞ | 6 | |
| Supply current | ICC | 138 | µA | TA = Full range (-40°C to 85°C); RL = ∞ | 6 | ||
| Output voltage swing (high) | VOH | 3.4 | 3.6 | V | TA = 25°C; IL = 0.35 mA to GND, VIC = 0 V | 6 | |
| Output voltage swing (low) | VOL | 0.7 | 0.82 | V | TA = 25°C; IL = 0.35 mA from VCC, VIC = 0 V | 6 | |
| Output voltage swing (low) | VOL | 1 | V | TA = Full range (-40°C to 85°C); IL = 0.35 mA from VCC, VIC = 0 V | 6 | ||
| Output source current | IO | 7 | 10 | mA | TA = 25°C; VO = 3 V, VID = 1 V | 6 | |
| Output source current | IO | 4 | mA | TA = Full range (-40°C to 85°C); VO = 3 V, VID = 1 V | 6 | ||
| Output sink current | IO | 4 | 5 | mA | TA = 25°C; VO = 1.5 V, VID = -1 V | 6 | |
| Output sink current | IO | 3 | mA | TA = Full range (-40°C to 85°C); VO = 1.5 V, VID = -1 V | 6 | ||
| Output sink current (VIC = 0 V) | IO | 2 | 4 | mA | TA = 25°C; VO = 1.5 V, VID = -1 V, VIC = 0 V | 6 | |
| Output sink current (VIC = 0 V) | IO | 1 | mA | TA = Full range (-40°C to 85°C); VO = 1.5 V, VID = -1 V, VIC = 0 V | 6 | ||
| Output short to GND | IOS,GND | 20 | 35 | mA | TA = 25°C; VID = 1 V | 6 | |
| Output short to GND | IOS,GND | 40 | mA | TA = Full range (-40°C to 85°C); VID = 1 V | 6 | ||
| Output short to VCC | IOS,VCC | 15 | 30 | mA | TA = 25°C; VID = -1 V | 6 | |
| Output short to VCC | IOS,VCC | 45 | mA | TA = Full range (-40°C to 85°C); VID = -1 V | 6 | ||
| Supply voltage range | VCC | 32 | V | 4 | |||
| Differential input voltage | VID | -32 | 32 | V | 4 | ||
| Input voltage (either input) | VI | -0.3 | 32 | V | 4 | ||
| Operating virtual temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 3 | 32 | V | 4 | ||
| Common-mode voltage | VCM | 0 | V | Max printed as VCC, 1.5 V | 4 | ||
| Operating free-air temperature (LP2904) | TA | -40 | 85 | °C | LP2904 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 118.8 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 71.7 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 68.6 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 23.3 | °C/W | D (SOIC) 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 67.7 | °C/W | D (SOIC) 8 pins | 4 |
CAD (KiCad official)
- Symbol:
LP2904DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lp2904dr-etched.step/lp2904dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2904dr.step/lp2904dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
c058291cfadd8882, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).