3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMTCH105T-I
Microchip Tech · Pre-ordered MCUs · TSSOP-14
MTCH105T-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the operating voltage range is 2.05V to 3.6V. |
| 2 | MTI0 | input | Proximity/touch sensor 0 input; connect the sensor here, with a series resistor of at least 4.7 kΩ recommended for high-frequency noise immunity. |
| 3 | MTI1 | input | Proximity/touch sensor 1 input; connect the sensor here, with a series resistor of at least 4.7 kΩ recommended for high-frequency noise immunity. |
| 4 | MTPM | input | Low-power mode select; grounding it selects Low-Power mode with slower response, and VDD gives higher power consumption with faster response. |
| 5 | MTI2/Guard | bidirectional | Proximity/touch sensor 2 input or active guard output; the guard is driven in phase with MTIx and is enabled by grounding the GC pin. |
| 6 | MTI3 | input | Proximity/touch sensor 3 input; connect the sensor here, with a series resistor of at least 4.7 kΩ recommended for high-frequency noise immunity. |
| 7 | MTI4 | input | Proximity/touch sensor 4 input; connect the sensor here, with a series resistor of at least 4.7 kΩ recommended for high-frequency noise immunity. |
| 8 | MTO4 | output | MTI4 detect output, active-low open-drain that needs a pull-up resistor and pulls low when proximity/touch is detected. |
| 9 | MTO3 | output | MTI3 detect output, active-low open-drain that needs a pull-up resistor and pulls low when proximity/touch is detected. |
| 10 | MTO2/GC | bidirectional | MTI2 detect output (active-low, open-drain, needs a pull-up resistor) or guard control, where grounding GC enables the active guard signal on the Guard pin. |
| 11 | MTSA | input | Sensitivity adjust input; the voltage sets sensitivity linearly, with VDD giving the lowest and GND the highest, typically set by a resistor ladder. |
| 12 | MTO1 | output | MTI1 detect output, active-low open-drain that needs a pull-up resistor and pulls low when proximity/touch is detected. |
| 13 | MTO0 | output | MTI0 detect output, active-low open-drain that needs a pull-up resistor and pulls low when proximity/touch is detected. |
| 14 | VSS | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.05 | 3.6 | V | 1 | ||
| Operating Temperature | -40 | 85 | °C | 1 |
CAD (KiCad official)
- Symbol:
MTCH105T-I - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
mtch105t-i-etched.step/mtch105t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mtch105t-i.step/mtch105t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (7 pp, sha256
587d06cef5395a40, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).