component
RSS 2W 1K J T52
Public Made by Adomby adom
TyoHM Through Hole Resistors, 插件,D4.5xL11mm. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRSS 2W 1K J T52
TyoHM · Through Hole Resistors · R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal
RSS 2W 1K J T52 from TyoHM, in a R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TyoHM |
| Package | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nominal resistance | R | 1 | KΩ | MPN value '1K' per part-numbering (2.3) | 2 | ||
| Tolerance (J) | -5 | 5 | % | J = ±5%, bridge method at room temperature (2.4) | 2 | ||
| Resistance temperature coefficient | TCR | -300 | 300 | ppm/℃ | Per 7.1 TC formula between reference temperature T1 and test temperature T2 | 4 | |
| Rated power | P | 2 | W | Max load power at 70℃ ambient; declines above 70℃ per derating curve (2W row) | 2 | ||
| Max working voltage (2W) | 350 | V | 2W row of dimension table; rated voltage is the lesser of the E=√(P×R) result and this maximum load voltage (3.1) | 3 | |||
| Max overload voltage (2W) | 600 | V | 2W row of dimension table | 3 | |||
| Operating temperature range | -55 | 155 | ℃ | Operating temperature range (5) | 4 | ||
| Temperature cycle resistance change | ΔR/R | -1 | 1 | % | 5 cycles -55℃ to 155℃ (30 min dwell), then 1 h at room temp; pre- vs post-test | 4 | |
| Short time overload resistance change | ΔR/R | -2 | 2 | % | 2.5× rated voltage for 5 s; 30 min recovery; RSS value ±2% (non-RSS ±1%) | 5 | |
| Insulation resistance | IR | 1000 | MΩ | DC 100V or 500V megger, lead wires to V-shaped metal trough | 5 | ||
| Load life resistance change | ΔR/R | -5 | 5 | % | 70℃ oven, rated voltage, 1.5 h ON / 0.5 h OFF, 1000+48/-0 h; 1 h cooling | 5 | |
| Moisture-proof load life resistance change | ΔR/R | -5 | 5 | % | 40±2℃, 90-95% RH, rated power 1.5 h ON / 0.5 h OFF, 500+24/-0 h | 5 | |
| Resistance to soldering heat resistance change | ΔR/R | -1 | 1 | % | 270±5℃ for 10±1 s, or 350±10℃ for 3.5±0.5 s; 1 h at room temp after | 5 |
CAD (KiCad official)
- Symbol:
RSS 2W 1K J T52 - Footprint:
Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal - 3D model: R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TyoHM datasheet (10 pp, sha256
397c4383d51aae56, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).