LT3060MPTS8-5#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	SHDN	input	Shutdown pin; pulling it low puts the device in a low power state and turns the output off, must be connected to IN if unused, and cannot be driven below GND unless tied to IN (absolute max ±50V).
2	GND	power_in	Ground pin; connect to PCB ground (pins 2, 3 and 4 are all GND on the TS8 package).
3	GND	power_in	Ground pin; connect to PCB ground (pins 2, 3 and 4 are all GND on the TS8 package).
4	GND	power_in	Ground pin; connect to PCB ground (pins 2, 3 and 4 are all GND on the TS8 package).
5	IN	power_in	Input supply pin for operation from 1.6V to 45V, needing a 1µF to 10µF bypass capacitor if located more than six inches from the main input filter capacitor, and it withstands reverse voltage.
6	OUT	power_out	Output pin supplying up to 100mA to the load, requiring a minimum 2.2µF ceramic output capacitor for stability.
7	ADJ	input	Adjust pin, the error amplifier's inverting terminal at 600mV with typical 15nA bias current flowing out; for fixed-voltage versions an optional feedforward capacitor to OUT may be added or the pin left floating.
8	REF/BYP	passive	Reference/bypass pin; a capacitor to GND (10nF typical gives 30µVRMS noise) lowers noise and sets soft-start time, must be left floating if unused and must not be driven by active circuitry.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	TSOT-23-8
Category	Power Management ICs
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Regulated Output Voltage (LT3060-5, MP)	VOUT	4.875	5	5.1	V	5.55V < VIN < 45V, 1mA < ILOAD < 100mA (MP-, H-Grades)	4
Regulated Output Voltage (LT3060-5)	VOUT	4.95	5	5.05	V	VIN = 5.55V, ILOAD = 1mA	4
Minimum Input Voltage			1.6	2.1	V	ILOAD = 100mA	4
Line Regulation (LT3060-5, MP)			1.5	25	mV	ΔVIN = 5.55V to 45V, ILOAD = 1mA (MP-, H-Grades)	4
Load Regulation (LT3060-5, MP)			3.7	75	mV	VIN = 5.55V, ILOAD = 1mA to 100mA (MP-, H-Grades)	5
Dropout Voltage			75	180	mV	ILOAD = 1mA	5
Dropout Voltage			150	300	mV	ILOAD = 10mA	5
Dropout Voltage			240	410	mV	ILOAD = 50mA (Note 14)	5
Dropout Voltage			300	510	mV	ILOAD = 100mA (Note 14)	5
GND Pin Current			40	80	µA	VIN = VOUT(NOMINAL) + 0.55V, ILOAD = 0µA	5
GND Pin Current			60	100	µA	ILOAD = 1mA	5
GND Pin Current			160	350	µA	ILOAD = 10mA	5
GND Pin Current			0.8	1.8	mA	ILOAD = 50mA	5
GND Pin Current			2	4	mA	ILOAD = 100mA	5
Quiescent Current in Shutdown			0.3	1	µA	VIN = 45V, VSHDN = 0V	5
Shutdown Threshold (Off to On)			0.8	1.5	V	VOUT = Off to On	5
Shutdown Threshold (On to Off)		0.3	0.7		V	VOUT = On to Off	5
SHDN Pin Current				1	µA	VSHDN = 0V	5
SHDN Pin Current			0.9	3	µA	VSHDN = 45V	5
Ripple Rejection (LT3060-5)		52	67		dB	VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 100mA, VIN = 6.5V (Avg)	5
Current Limit		110			mA	VIN = 7V, VOUT = 0	5
Current Limit			200		mA	VIN = VOUT(NOMINAL) + 1V (Notes 6, 12), ΔVOUT = -5%	5
Input Reverse Leakage Current				300	µA	VIN = -45V, VOUT = 0	6
Reverse Output Current (LT3060-5)			5	10	µA	VOUT = 5V, VIN = 0V	6
Output Voltage Noise			30		µVRMS	COUT = 10µF, ILOAD = 100mA, CBYP = 0.01µF, VOUT = 600mV, BW = 10Hz to 100kHz	5
Operating Junction Temperature (MP-Grade)	TJ	-55		150	°C	Notes 3, 5, 13	2
IN Pin Voltage		-50		50	V		2
OUT Pin Voltage		-50		50	V		2
Input-to-Output Differential Voltage		-50		50	V	Note 2	2
ADJ Pin Voltage		-50		50	V		2
SHDN Pin Voltage		-50		50	V		2
REF/BYP Pin Voltage		-0.3		1	V		2
Storage Temperature Range		-65		150	°C		2
Maximum Junction Temperature (TS8)	TJMAX			150	°C	TS8 package	2
Thermal Resistance Junction-to-Ambient	θJA	57		67	°C/W	TS8 package; depends on copper area (see Applications Information)	2
Thermal Resistance Junction-to-Case	θJC		25		°C/W	TS8 package	2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
contacts	COPPER		Table 2. DC Package, 8-Lead DFN COPPER AREA	20

CAD (KiCad official)

Symbol: LT3060MPTS8-5#TRMPBF
Footprint: Package_TO_SOT_SMD:TSOT-23-8
3D model: TSOT-23-8 (KiCad packages3D, STEP)
3D model files: lt3060mpts8-5-trmpbf-etched.step / lt3060mpts8-5-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3060mpts8-5-trmpbf.step / lt3060mpts8-5-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (26 pp, sha256 1da5b0984b8afdd3, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT3060MPTS8-5#TRMPBF

Verified LT3060MPTS8-5#TRMPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README