3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL239
XINLUDA · Comparators · SOP-14
XL239 from XINLUDA, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Open-collector comparator output (printed name OUT1; the printed description says comparator 2, see review notes), with output voltage up to 36 V and output current up to 20 mA absolute maximum. |
| 2 | OUT2 | output | Open-collector comparator output (printed name OUT2; the printed description says comparator 1, see review notes), with output voltage up to 36 V and output current up to 20 mA absolute maximum. |
| 3 | VCC | power_in | Positive supply; recommended supply voltage is 2 V to 30 V for non-V devices and 2 V to 32 V for V devices, with an absolute maximum of 36 V. |
| 4 | IN2- | input | Negative (inverting) input of the comparator labelled 1 in the printed description (see review notes); inputs may range from -0.3 V to 36 V and input current is limited to -50 mA. |
| 5 | IN2+ | input | Positive (non-inverting) input of the comparator labelled 1 in the printed description (see review notes); common-mode range is ground to VCC - 1.5 V, and inputs may range from -0.3 V to 36 V. |
| 6 | IN1- | input | Negative (inverting) input of the comparator labelled 2 in the printed description (see review notes); inputs may range from -0.3 V to 36 V and input current is limited to -50 mA. |
| 7 | IN1+ | input | Positive (non-inverting) input of the comparator labelled 2 in the printed description (see review notes); common-mode range is ground to VCC - 1.5 V, and inputs may range from -0.3 V to 36 V. |
| 8 | IN3- | input | Negative (inverting) input of comparator 3; inputs may range from -0.3 V to 36 V and input current is limited to -50 mA. |
| 9 | IN3+ | input | Positive (non-inverting) input of comparator 3; common-mode range is ground to VCC - 1.5 V, and inputs may range from -0.3 V to 36 V. |
| 10 | IN4- | input | Negative (inverting) input of comparator 4; inputs may range from -0.3 V to 36 V and input current is limited to -50 mA. |
| 11 | IN4+ | input | Positive (non-inverting) input of comparator 4; common-mode range is ground to VCC - 1.5 V, and inputs may range from -0.3 V to 36 V. |
| 12 | GND | power_in | Negative supply (ground); the input common-mode range includes ground, and all voltages are referenced to network ground. |
| 13 | OUT4 | output | Open-collector output of comparator 4, with output voltage up to 36 V and output current up to 20 mA absolute maximum. |
| 14 | OUT3 | output | Open-collector output of comparator 3, with output voltage up to 36 V and output current up to 20 mA absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, 25°C | VIO | 3 | 9 | mV | 25°C; VCC = 5 V to 30 V, VIC = VICR min, VO = 1.4 V | 5 | |
| Input offset voltage, Full range | VIO | 18 | mV | Full range (-25°C to +85°C); VCC = 5 V to 30 V, VIC = VICR min, VO = 1.4 V | 5 | ||
| Input offset current, 25°C | IIO | 5 | 50 | nA | 25°C; VO = 1.4 V | 5 | |
| Input offset current, Full range | IIO | 150 | nA | Full range (-25°C to +85°C); VO = 1.4 V | 5 | ||
| Input bias current, 25°C | IIB | -25 | -250 | nA | 25°C; VO = 1.4 V | 5 | |
| Input bias current, Full range | IIB | -400 | nA | Full range (-25°C to +85°C); VO = 1.4 V | 5 | ||
| Common-mode input voltage range, 25°C (lower limit 0 V; upper limit VCC, 1.5 V, not numeric) | VICR | 0 | V | 25°C | 5 | ||
| Common-mode input voltage range, Full range (lower limit 0 V; upper limit VCC, 2 V as printed 'VCC 2') | VICR | 0 | V | Full range (-25°C to +85°C) | 5 | ||
| Large-signal differential voltage amplification, 25°C | AVD | 50 | 200 | V/mV | VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC | 5 | |
| High-level output current, VOH = 5 V, 25°C | IOH | 0.1 | 50 | nA | 25°C; VID = 1 V, VOH = 5 V | 5 | |
| High-level output current, VOH = 30 V, Full range | IOH | 1 | μA | Full range (-25°C to +85°C); VID = 1 V, VOH = 30 V | 5 | ||
| Low-level output voltage, 25°C | VOL | 150 | 400 | mV | 25°C; VID = -1 V, IOL = 4 mA | 5 | |
| Low-level output voltage, Full range | VOL | 700 | mV | Full range (-25°C to +85°C); VID = -1 V, IOL = 4 mA | 5 | ||
| Low-level output current, 25°C | IOL | 6 | 16 | mA | 25°C; VID = -1 V, VOL = 1.5 V | 5 | |
| Supply current (four comparators), 25°C | ICC | 1.2 | 3.5 | mA | 25°C; VO = 2.5 V, No load | 5 | |
| Supply voltage (non-V devices) | VCC | 2 | 30 | V | Non-V devices | 5 | |
| Junction temperature, XL/XD239 | TJ | -25 | 85 | °C | XL/XD239 | 5 | |
| Supply voltage | VCC | 36 | V | Absolute maximum | 4 | ||
| Differential input voltage | VID | -36 | 36 | V | Differential voltage at xIN+ with respect to xIN- | 4 | |
| Input voltage range (either input) | VI | -0.3 | 36 | V | Either input; voltages with respect to network ground | 4 | |
| Input current | IK | -50 | mA | Parasitic diode input current | 4 | ||
| Output voltage | VO | 36 | V | Absolute maximum | 4 | ||
| Output current | IO | 20 | mA | Absolute maximum | 4 | ||
| Operating virtual-junction temperature | TJ | 150 | °C | Operating | 4 | ||
| Case temperature for soldering, SOP14 | 260 | °C | Case temperature for 60 s, SOP14 | 4 | |||
| Storage temperature | Tstg | -50 | 150 | °C | Storage | 4 | |
| ESD, Human body model (HBM) | V(ESD) | -500 | 500 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD, Charged-device model (CDM) | V(ESD) | -750 | 750 | V | CDM, per JEDEC JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance, SOP | RθJA | 98.8 | °C/W | SOP package | 4 | ||
| Junction-to-case (top) thermal resistance, SOP | RθJC(top) | 64.3 | °C/W | SOP package | 4 | ||
| Junction-to-board thermal resistance, SOP | RθJB | 59.7 | °C/W | SOP package | 4 | ||
| Junction-to-top characterization parameter, SOP | ψJT | 25.7 | °C/W | SOP package | 4 | ||
| Junction-to-board characterization parameter, SOP | ψJB | 59.3 | °C/W | SOP package | 4 | ||
| Response time, 100-mV input step with 5-mV overdrive | 1.3 | μs | VCC = 5 V, TA = 25°C; RL to 5 V through 5.1 kΩ, CL = 15 pF; 100-mV input step with 5-mV overdrive | 7 | |||
| Response time, TTL-level input step | 0.3 | μs | VCC = 5 V, TA = 25°C; RL to 5 V through 5.1 kΩ, CL = 15 pF; TTL-level input step | 7 |
CAD (KiCad official)
- Symbol:
XL239 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
xl239-etched.step/xl239-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl239.step/xl239.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (13 pp, sha256
15da59167037a478, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).