component
ACS710KLATR-12CB-T
Public Made by Adomby adom
Allegro MicroSystems LLC Current Sensors, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownACS710KLATR-12CB-T
Allegro MicroSystems LLC · Current Sensors · SOIC-16-300mil
ACS710KLATR-12CB-T from Allegro MicroSystems LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sensed current copper conduction path input terminal, part of internal loop to IP- pins supporting unidirectional or bidirectional current flow. |
| 2 | IP+ | passive | Sensed current copper conduction path input terminal, part of internal loop to IP- pins supporting unidirectional or bidirectional current flow. |
| 3 | IP+ | passive | Sensed current copper conduction path input terminal, part of internal loop to IP- pins supporting unidirectional or bidirectional current flow. |
| 4 | IP+ | passive | Sensed current copper conduction path input terminal, part of internal loop to IP- pins supporting unidirectional or bidirectional current flow. |
| 5 | IP- | passive | Sensed current copper conduction path return terminal, part of internal loop to IP+ pins supporting unidirectional or bidirectional current flow. |
| 6 | IP- | passive | Sensed current copper conduction path return terminal, part of internal loop to IP+ pins supporting unidirectional or bidirectional current flow. |
| 7 | IP- | passive | Sensed current copper conduction path return terminal, part of internal loop to IP+ pins supporting unidirectional or bidirectional current flow. |
| 8 | IP- | passive | Sensed current copper conduction path return terminal, part of internal loop to IP+ pins supporting unidirectional or bidirectional current flow. |
| 9 | GND | power_in | Device ground connection. |
| 10 | VZCR | output | Voltage reference output pin providing zero current (0 A) reference scaled to VCC nominally at 0.5×VCC. |
| 11 | FILTER | passive | Filter terminal for external capacitor connected to GND to set device bandwidth. |
| 12 | VIOUT | output | Analog output pin with voltage proportional to sensed current flowing between IP+ and IP- pins. |
| 13 | FAULT | tri_state | Open-drain overcurrent fault output pin transitioning to logic low when sensed current exceeds programmed threshold. |
| 14 | VCC | power_in | Supply voltage input with operating range 3 to 5.5 V. |
| 15 | VOC | input | Overcurrent threshold analog input pin setting the overcurrent fault switch point within 0.25×VCC to 0.4×VCC range. |
| 16 | FAULT_EN | input | Fault enable input pin; high enables overcurrent fault detection, low resets the FAULT output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems LLC |
| Package | SOIC-16-300mil |
| Category | Magnetic Sensors |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ACS710KLATR-12CB-T - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs710klatr-12cb-t-etched.step/acs710klatr-12cb-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs710klatr-12cb-t.step/acs710klatr-12cb-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems LLC datasheet (23 pp, sha256
c2acc798fe0eefb1, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).