3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC32MX330F064L-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-100(14x14)
PIC32MX330F064L-I from Microchip Tech, in a TQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG15 | bidirectional | PORTG bidirectional I/O pin with Schmitt Trigger input buffer. |
| 2 | VDD | power_in | Positive supply for peripheral logic and I/O pins; all VDD pins must be connected. |
| 3 | AN22/RPE5/PMD5/RE5 | bidirectional | Analog input AN22, also remappable peripheral pin RPE5, PMP data PMD5 and PORTE I/O RE5. |
| 4 | AN23/PMD6/RE6 | bidirectional | Analog input AN23, also PMP data PMD6 and PORTE I/O RE6. |
| 5 | AN27/PMD7/RE7 | bidirectional | Analog input AN27, also PMP data PMD7 and PORTE I/O RE7. |
| 6 | RPC1/RC1 | bidirectional | Remappable peripheral pin RPC1 and PORTC I/O pin RC1 with Schmitt Trigger input. |
| 7 | RPC2/RC2 | bidirectional | Remappable peripheral pin RPC2 and PORTC I/O pin RC2 with Schmitt Trigger input. |
| 8 | RPC3/RC3 | bidirectional | Remappable peripheral pin RPC3 and PORTC I/O pin RC3 with Schmitt Trigger input. |
| 9 | RPC4/CTED7/RC4 | bidirectional | Remappable peripheral pin RPC4, CTMU edge input CTED7 and PORTC I/O pin RC4. |
| 10 | AN16/C1IND/RPG6/SCK2/PMA5/RG6 | bidirectional | Analog input AN16 and Comparator 1 input C1IND, also SPI2 clock SCK2 and PMP address PMA5. |
| 11 | AN17/C1INC/RPG7/PMA4/RG7 | bidirectional | Analog input AN17 and Comparator 1 input C1INC, also PMP address PMA4. |
| 12 | AN18/C2IND/RPG8/PMA3/RG8 | bidirectional | Analog input AN18 and Comparator 2 input C2IND, also PMP address PMA3. |
| 13 | MCLR | input | Master Clear input; pulling this active-low pin low generates a device Reset. |
| 14 | AN19/C2INC/RPG9/PMA2/RG9 | bidirectional | Analog input AN19 and Comparator 2 input C2INC, also PMP address PMA2. |
| 15 | VSS | power_in | Ground reference for logic and I/O pins; all VSS pins must be connected. |
| 16 | VDD | power_in | Positive supply for peripheral logic and I/O pins; all VDD pins must be connected. |
| 17 | TMS/CTED1/RA0 | bidirectional | JTAG Test Mode Select input, CTMU edge input CTED1 and PORTA I/O pin RA0. |
| 18 | RPE8/RE8 | bidirectional | Remappable peripheral pin RPE8 and PORTE I/O pin RE8 with Schmitt Trigger input. |
| 19 | RPE9/RE9 | bidirectional | Remappable peripheral pin RPE9 and PORTE I/O pin RE9 with Schmitt Trigger input. |
| 20 | AN5/C1INA/RPB5/VBUSON/RB5 | bidirectional | Analog input AN5, Comparator 1 input C1INA, USB VBUSON output on USB devices and PORTB I/O RB5. |
| 21 | AN4/C1INB/RB4 | bidirectional | Analog input AN4, Comparator 1 input C1INB and PORTB I/O pin RB4. |
| 22 | PGED3/AN3/C2INA/RPB3/RB3 | bidirectional | ICSP/debug data I/O for channel 3; pull-ups and series diodes on PGEx pins interfere with programming. |
| 23 | PGEC3/AN2/C2INB/RPB2/CTED13/RB2 | input | ICSP/debug clock input for channel 3; pull-ups and series components on PGEx pins interfere with programming. |
| 24 | PGEC1/AN1/RPB1/CTED12/RB1 | bidirectional | ICSP/debug clock input for channel 1 and analog input AN1; no pull-ups on PGEx pins. |
| 25 | PGED1/AN0/RPB0/RB0 | bidirectional | ICSP/debug data I/O for channel 1 and analog input AN0. |
| 26 | PGEC2/AN6/RPB6/RB6 | bidirectional | ICSP/debug clock input for channel 2 and analog input AN6. |
| 27 | PGED2/AN7/RPB7/CTED3/RB7 | bidirectional | ICSP/debug data I/O for channel 2 and analog input AN7. |
| 28 | VREF-/CVREF-/PMA7/RA9 | power_in | Analog voltage reference low input VREF- and comparator reference CVREF-, also PMP address PMA7. |
| 29 | VREF+/CVREF+/PMA6/RA10 | power_in | Analog voltage reference high input VREF+ and comparator reference CVREF+, also PMP address PMA6. |
| 30 | AVDD | power_in | Positive supply for analog modules; this pin must be connected at all times. |
| 31 | AVSS | power_in | Ground reference for analog modules; must be connected regardless of ADC use. |
| 32 | AN8/RPB8/CTED10/RB8 | bidirectional | Analog input AN8, remappable peripheral pin RPB8 and PORTB I/O RB8. |
| 33 | AN9/RPB9/CTED4/RB9 | bidirectional | Analog input AN9, remappable peripheral pin RPB9 and PORTB I/O RB9. |
| 34 | CVREFOUT/AN10/RPB10/CTED11/PMA13/RB10 | output | Comparator voltage reference output CVREFOUT, also analog input AN10 and PORTB I/O RB10. |
| 35 | AN11/PMA12/RB11 | bidirectional | Analog input AN11, PMP address PMA12 and PORTB I/O RB11. |
| 36 | VSS | power_in | Ground reference for logic and I/O pins; all VSS pins must be connected. |
| 37 | VDD | power_in | Positive supply for peripheral logic and I/O pins; all VDD pins must be connected. |
| 38 | TCK/CTED2/RA1 | bidirectional | JTAG Test Clock input, CTMU edge input CTED2 and PORTA I/O pin RA1. |
| 39 | RPF13/RF13 | bidirectional | Remappable peripheral pin RPF13 and PORTF I/O pin RF13. |
| 40 | RPF12/RF12 | bidirectional | Remappable peripheral pin RPF12 and PORTF I/O pin RF12. |
| 41 | AN12/PMA11/RB12 | bidirectional | Analog input AN12, PMP address PMA11 and PORTB I/O RB12. |
| 42 | AN13/PMA10/RB13 | bidirectional | Analog input AN13, PMP address PMA10 and PORTB I/O RB13. |
| 43 | AN14/RPB14/CTED5/PMA1/RB14 | bidirectional | Analog input AN14, remappable pin RPB14, PMP address PMA1 and PORTB I/O RB14. |
| 44 | AN15/RPB15/OCFB/CTED6/PMA0/RB15 | bidirectional | Analog input AN15, Output Compare Fault B input OCFB and PORTB I/O RB15. |
| 45 | VSS | power_in | Ground reference for logic and I/O pins; all VSS pins must be connected. |
| 46 | VDD | power_in | Positive supply for peripheral logic and I/O pins; all VDD pins must be connected. |
| 47 | RPD14/RD14 | bidirectional | Remappable peripheral pin RPD14 and PORTD I/O pin RD14. |
| 48 | RPD15/RD15 | bidirectional | Remappable peripheral pin RPD15 and PORTD I/O pin RD15. |
| 49 | RPF4/PMA9/RF4 | bidirectional | Remappable peripheral pin RPF4, PMP address PMA9 and PORTF I/O pin RF4. |
| 50 | RPF5/PMA8/RF5 | bidirectional | Remappable peripheral pin RPF5, PMP address PMA8 and PORTF I/O pin RF5. |
| 51 | RPF3/RF3 | bidirectional | Remappable peripheral pin RPF3 and PORTF I/O pin RF3. |
| 52 | RPF2/RF2 | bidirectional | Remappable peripheral pin RPF2 and PORTF I/O pin RF2. |
| 53 | RPF8/RF8 | bidirectional | Remappable peripheral pin RPF8 and PORTF I/O pin RF8. |
| 54 | RPF7/RF7 | bidirectional | Remappable peripheral pin RPF7 (input functions only) and PORTF I/O pin RF7. |
| 55 | RPF6/SCK1/INT0/RF6 | bidirectional | Remappable pin RPF6 (input functions only), SPI1 clock SCK1, external interrupt INT0 and PORTF I/O RF6. |
| 56 | SDA1/RG3 | bidirectional | I2C1 serial data SDA1 and PORTG I/O pin RG3. |
| 57 | SCL1/RG2 | bidirectional | I2C1 serial clock SCL1 and PORTG I/O pin RG2. |
| 58 | SCL2/RA2 | bidirectional | I2C2 serial clock SCL2 and PORTA I/O pin RA2. |
| 59 | SDA2/RA3 | bidirectional | I2C2 serial data SDA2 and PORTA I/O pin RA3. |
| 60 | TDI/CTED9/RA4 | bidirectional | JTAG Test Data input TDI, CTMU edge input CTED9 and PORTA I/O pin RA4. |
| 61 | TDO/RA5 | bidirectional | JTAG Test Data output TDO and PORTA I/O pin RA5. |
| 62 | VDD | power_in | Positive supply for peripheral logic and I/O pins; all VDD pins must be connected. |
| 63 | OSC1/CLKI/RC12 | input | Oscillator crystal input or external clock input CLKI; ST buffer in RC mode, CMOS otherwise. |
| 64 | OSC2/CLKO/RC15 | output | Oscillator crystal output; optionally CLKO in RC and EC modes, paired with OSC1. |
| 65 | VSS | power_in | Ground reference for logic and I/O pins; all VSS pins must be connected. |
| 66 | RPA14/RA14 | bidirectional | Remappable peripheral pin RPA14 and PORTA I/O pin RA14. |
| 67 | RPA15/RA15 | bidirectional | Remappable peripheral pin RPA15 and PORTA I/O pin RA15. |
| 68 | RPD8/RTCC/RD8 | bidirectional | Remappable peripheral pin RPD8, RTCC alarm output RTCC and PORTD I/O pin RD8. |
| 69 | RPD9/RD9 | bidirectional | Remappable peripheral pin RPD9 and PORTD I/O pin RD9. |
| 70 | RPD10/PMCS2/RD10 | bidirectional | Remappable peripheral pin RPD10, PMP chip select PMCS2 and PORTD I/O pin RD10. |
| 71 | RPD11/PMCS1/RD11 | bidirectional | Remappable peripheral pin RPD11, PMP chip select PMCS1 and PORTD I/O pin RD11. |
| 72 | RPD0/RD0 | bidirectional | Remappable peripheral pin RPD0 and PORTD I/O pin RD0 with Schmitt Trigger input. |
| 73 | SOSCI/RPC13/RC13 | input | 32.768 kHz low-power secondary oscillator crystal input; CMOS otherwise. |
| 74 | SOSCO/RPC14/T1CK/RC14 | output | 32.768 kHz low-power secondary oscillator crystal output, also Timer1 clock T1CK. |
| 75 | VSS | power_in | Ground reference for logic and I/O pins; all VSS pins must be connected. |
| 76 | AN24/RPD1/RD1 | bidirectional | Analog input AN24, remappable pin RPD1 and PORTD I/O pin RD1. |
| 77 | AN25/RPD2/RD2 | bidirectional | Analog input AN25, remappable pin RPD2 and PORTD I/O pin RD2. |
| 78 | AN26/RPD3/RD3 | bidirectional | Analog input AN26, remappable pin RPD3 and PORTD I/O pin RD3. |
| 79 | RPD12/PMD12/RD12 | bidirectional | Remappable peripheral pin RPD12, PMP data PMD12 and PORTD I/O pin RD12. |
| 80 | PMD13/RD13 | bidirectional | PMP data PMD13 and PORTD I/O pin RD13. |
| 81 | RPD4/PMWR/RD4 | bidirectional | Remappable peripheral pin RPD4, PMP write strobe PMWR and PORTD I/O pin RD4. |
| 82 | RPD5/PMRD/RD5 | bidirectional | Remappable peripheral pin RPD5, PMP read strobe PMRD and PORTD I/O pin RD5. |
| 83 | PMD14/RD6 | bidirectional | PMP data PMD14 and PORTD I/O pin RD6. |
| 84 | PMD15/RD7 | bidirectional | PMP data PMD15 and PORTD I/O pin RD7. |
| 85 | VCAP | passive | Capacitor for internal voltage regulator; low-ESR (3 ohm) capacitor to ground, must not be connected to VDD. |
| 86 | VDD | power_in | Positive supply for peripheral logic and I/O pins; all VDD pins must be connected. |
| 87 | RPF0/PMD11/RF0 | bidirectional | Remappable peripheral pin RPF0, PMP data PMD11 and PORTF I/O pin RF0. |
| 88 | RPF1/PMD10/RF1 | bidirectional | Remappable peripheral pin RPF1, PMP data PMD10 and PORTF I/O pin RF1. |
| 89 | RPG1/PMD9/RG1 | bidirectional | Remappable peripheral pin RPG1, PMP data PMD9 and PORTG I/O pin RG1. |
| 90 | RPG0/PMD8/RG0 | bidirectional | Remappable peripheral pin RPG0, PMP data PMD8 and PORTG I/O pin RG0. |
| 91 | TRCLK/RA6 | bidirectional | Trace clock output TRCLK and PORTA I/O pin RA6. |
| 92 | TRD3/CTED8/RA7 | bidirectional | Trace data bit 3 TRD3, CTMU edge input CTED8 and PORTA I/O pin RA7. |
| 93 | PMD0/RE0 | bidirectional | PMP data PMD0 and PORTE I/O pin RE0. |
| 94 | PMD1/RE1 | bidirectional | PMP data PMD1 and PORTE I/O pin RE1. |
| 95 | TRD2/RG14 | bidirectional | Trace data bit 2 TRD2 and PORTG I/O pin RG14. |
| 96 | TRD1/RG12 | bidirectional | Trace data bit 1 TRD1 and PORTG I/O pin RG12. |
| 97 | TRD0/RG13 | bidirectional | Trace data bit 0 TRD0 and PORTG I/O pin RG13. |
| 98 | AN20/PMD2/RE2 | bidirectional | Analog input AN20, PMP data PMD2 and PORTE I/O pin RE2. |
| 99 | RPE3/CTPLS/PMD3/RE3 | bidirectional | Remappable peripheral pin RPE3, CTMU pulse output CTPLS, PMP data PMD3 and PORTE I/O RE3. |
| 100 | AN21/PMD4/RE4 | bidirectional | Analog input AN21, PMP data PMD4 and PORTE I/O pin RE4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-100(14x14) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply Voltage | VDD | 2.3 | 3.6 | V | Standard Operating Conditions: 2.3V to 3.6V | 283 | |
| Operating temperature, Industrial | TA | -40 | 85 | °C | -40°C <= TA <= +85°C for Industrial | 283 | |
| VDD Start Voltage to Ensure Internal Power-on Reset Signal | VPOR | 1.75 | 2.1 | V | , | 283 | |
| RAM Data Retention Voltage | VDR | 1.75 | V | , | 283 | ||
| VDD Rise Rate to Ensure Internal Power-on Reset Signal | SVDD | 5e-05 | 0.115 | V/s | , | 283 |
CAD (KiCad official)
- Symbol:
PIC32MX330F064L-I - Footprint:
Package_QFP:TQFP-100_14x14mm_P0.5mm - 3D model: TQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
pic32mx330f064l-i-etched.step/pic32mx330f064l-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mx330f064l-i.step/pic32mx330f064l-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (366 pp, sha256
370a810479dca15a, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).