3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA365AIDBVT
Texas Instruments · Operational Amplifier · SOT-23-5
OPA365AIDBVT from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output; the output voltage swing is within 10 mV of the supply rails. |
| 2 | V- | power_in | Negative (lowest) power supply; the supply span (V+) - (V-) is specified from 2.2 V to 5.5 V. |
| 3 | +IN | input | Positive (noninverting) input; the common-mode range extends from (V-) - 0.1 V to (V+) + 0.1 V. |
| 4 | -IN | input | Negative (inverting) input; input signals more than 0.5 V beyond the supply rails should be limited to 10 mA or less. |
| 5 | V+ | power_in | Positive (highest) power supply; the absolute maximum supply voltage is 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 5.5 | V | 5 | ||||
| Signal input terminals, voltage | -0.5 | 0.5 | V | 5 | |||
| Signal input terminals, current | -10 | 10 | mA | 5 | |||
| Operating temperature, TA | TA | -40 | 150 | °C | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Power supply voltage, (V+), (V-) | 2.2 | 5.5 | V | 5 | |||
| Specified temperature | -40 | 125 | °C | 5 | |||
| Operating temperature | -40 | 150 | °C | 5 | |||
| Input offset voltage | VOS | 100 | 200 | µV | 6 | ||
| Input bias current | IB | -10 | 0.2 | 10 | pA | 6 | |
| Input offset current | IOS | -10 | 0.2 | 10 | pA | 6 | |
| Common-mode rejection ratio | CMRR | 100 | 120 | dB | (V−) − 0.1 V ≤ VCM ≤ (V+) + 0.1 V, at TA = −40°C to +125°C | 6 | |
| Open-loop voltage gain | AOL | 100 | 120 | dB | RL = 10 kΩ, 100 mV < VO < (V+), 100 mV, at TA = −40°C to +125°C | 6 | |
| Open-loop voltage gain | AOL | 94 | dB | RL = 600 Ω, 200 mV < VO < (V+), 200 mV, at TA = −40°C to +125°C | 6 | ||
| Overload recovery time | 0.1 | µs | VS = 5 V, VIN × Gain > VS | 7 | |||
| Voltage output swing from rail | 10 | 20 | mV | RL = 10 kΩ, VS = 5.5 V, at TA = −40°C to +125°C | 7 | ||
| Short-circuit current | ISC | -65 | 65 | mA | 7 | ||
| Specified voltage range | VS | 2.2 | 5.5 | V | 7 | ||
| Quiescent current per amplifier | IQ | 4.6 | 5 | mA | IO = 0 mA | 7 | |
| Quiescent current per amplifier over temperature | IQ | 5 | mA | At TA = −40°C to +125°C | 7 | ||
| Input offset voltage versus drift | dVOS/dT | 1 | µV/°C | At TA = −40°C to +125°C | 6 | ||
| Input offset voltage versus power supply | PSRR | 10 | µV/V | VS = 2.2 V to 5.5 V, at TA = −40°C to +125°C | 6 | ||
| Channel separation, DC | 0.2 | µV/V | 6 | ||||
| Input voltage noise | en | 5 | µVPP | f = 0.1 Hz to 10 Hz | 6 | ||
| Input voltage noise density | en | 4.5 | nV/√Hz | f = 100 kHz | 6 | ||
| Input current noise density | in | 4 | fA/√Hz | f = 10 kHz | 6 | ||
| Input capacitance, differential | 6 | pF | 6 | ||||
| Input capacitance, common-mode | 2 | pF | 6 | ||||
| Gain-bandwidth product | GBW | 50 | MHz | VS = 5 V | 7 | ||
| Slew rate | SR | 25 | V/µs | VS = 5 V, G = 1 | 7 | ||
| Settling time, 0.1% | tS | 200 | ns | VS = 5 V, 4-V step, G = +1 | 7 | ||
| Settling time, 0.01% | tS | 300 | ns | VS = 5 V, 4-V step, G = +1 | 7 | ||
| Total harmonic distortion + noise | THD+N | 0.0004 | % | VS = 5 V, RL = 600 Ω, VO = 4 VPP, G = 1, f = 1 kHz | 7 | ||
| Open-loop output impedance | 30 | Ω | f = 1 MHz, IO = 0 mA | 7 | |||
| Junction-to-ambient thermal resistance, DBV (SOT-23) | RθJA | 206.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance, DBV (SOT-23) | RθJC(top) | 69.4 | °C/W | 5 | |||
| Junction-to-board thermal resistance, DBV (SOT-23) | RθJB | 34.2 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
OPA365AIDBVT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa365aidbvt-etched.step/opa365aidbvt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa365aidbvt.step/opa365aidbvt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
9a87d0790f4b118c, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).