3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC12HV615-I/SN
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
PIC12HV615-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin (the PIC12HV615 includes an internal shunt regulator, supply range 2.0V to user defined). |
| 2 | GP5/T1CKI/P1A*/OSC1/CLKIN | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also Timer1 clock input, alternate P1A PWM output, crystal/resonator OSC1 connection and external clock/RC input CLKIN. |
| 3 | GP4/AN3/CIN1-/T1G/P1B*/OSC2/CLKOUT | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 3 input, comparator inverting input CIN1-, Timer1 gate, alternate P1B PWM output, crystal OSC2 and FOSC/4 CLKOUT. |
| 4 | GP3/T1G*/MCLR/VPP | input | Input-only pin with interrupt-on-change, usable as Master Clear with internal weak pull-up, high-voltage programming voltage VPP, or alternate Timer1 gate T1G. |
| 5 | GP2/AN2/T0CKI/INT/COUT/CCP1/P1A | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 2 input, Timer0 clock input, external interrupt INT, comparator output COUT, and CCP1 capture/compare/PWM or P1A PWM output. |
| 6 | GP1/AN1/CIN0-/VREF/ICSPCLK | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 1 input, comparator inverting input CIN0-, external A/D voltage reference VREF and serial programming clock ICSPCLK. |
| 7 | GP0/AN0/CIN+/P1B/ICSPDAT | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 0 input, comparator non-inverting input CIN+, P1B PWM output and serial programming data ICSPDAT. |
| 8 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 143 | ||
| Voltage on MCLR with respect to VSS | MCLR | -0.3 | 13.5 | V | 143 | ||
| Ambient temperature under bias | -40 | 125 | °C | 143 | |||
| Storage temperature | -65 | 150 | °C | 143 | |||
| Maximum current out of VSS pin | 95 | mA | 143 | ||||
| Maximum current into VDD pin | 95 | mA | 143 | ||||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 143 | ||
| Output clamp current | IOK | 20 | mA | Vo < 0 or Vo > VDD | 143 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 143 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 143 | ||||
| Maximum current sunk by GPIO | 90 | mA | 143 | ||||
| Maximum current sourced by GPIO | 90 | mA | 143 | ||||
| Supply Voltage (D001) | VDD | 2 | V | PIC12HV609/615, FOSC <= 4 MHz; max user defined | 145 | ||
| Supply Voltage (D001B) | VDD | 2 | V | PIC12HV609/615, FOSC <= 8 MHz; max user defined | 145 | ||
| Supply Voltage (D001C) | VDD | 3 | V | PIC12HV609/615, FOSC <= 10 MHz; max user defined | 145 | ||
| Supply Voltage (D001D) | VDD | 4.5 | V | PIC12HV609/615, FOSC <= 20 MHz; max user defined | 145 | ||
| Operating temperature, industrial | TA | -40 | 85 | °C | Industrial | 145 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 145 | ||
| VDD Rise Rate for Power-on Reset | SVDD | 0.05 | V/ms | See Section 12.3.1 | 145 | ||
| Supply Current LP 32 kHz | IDD | 280 | 400 | µA | FOSC = 32 kHz LP mode, VDD = 4.5V | 147 | |
| Supply Current XT 4 MHz | IDD | 0.875 | 1.3 | mA | FOSC = 4 MHz XT mode, VDD = 4.5V | 147 | |
| Supply Current INTOSC 8 MHz | IDD | 1.2 | 1.6 | mA | FOSC = 8 MHz INTOSC mode, VDD = 4.5V | 147 | |
| Supply Current HS 20 MHz | IDD | 2.5 | 3.4 | mA | FOSC = 20 MHz HS mode, VDD = 4.5V | 147 | |
| Power-down Base Current | IPD | 135 | 200 | µA | VDD = 2.0V, WDT, BOR, Comparator, VREF and T1OSC disabled | 150 | |
| Power-down Base Current | IPD | 260 | 350 | µA | VDD = 4.5V, WDT, BOR, Comparator, VREF and T1OSC disabled | 150 | |
| WDT Current | 265 | 360 | µA | VDD = 4.5V | 150 | ||
| BOR Current | 265 | 360 | µA | VDD = 4.5V | 150 | ||
| Comparator Current, single comparator enabled | 320 | 430 | µA | VDD = 4.5V | 150 | ||
| A/D Current, no conversion in progress | 260 | 350 | µA | VDD = 4.5V | 150 | ||
| Input Low Voltage, I/O with TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V | 152 | ||
| Input Low Voltage, OSC1 (XT and LP modes) | VIL | 0.3 | V | 152 | |||
| Input High Voltage, I/O with TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V | 152 | ||
| Input High Voltage, OSC1 (XT and LP modes) | VIH | 1.6 | V | 152 | |||
| Input Leakage Current, I/O ports | IIL | 0.1 | 1 | µA | VSS <= VPIN <= VDD, pin at high-impedance | 152 | |
| Input Leakage Current, GP3/MCLR | IIL | 0.7 | 5 | µA | VSS <= VPIN <= VDD | 152 | |
| Input Leakage Current, OSC1 | IIL | 0.1 | 5 | µA | VSS <= VPIN <= VDD, XT, HS and LP oscillator configuration | 152 | |
| GPIO Weak Pull-up Current | IPUR | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS | 152 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 152 | ||
| Capacitive Loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 153 | ||
| Capacitive Loading, all I/O pins | CIO | 50 | pF | 153 | |||
| Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 153 | ||
| Thermal Resistance Junction to Ambient | θJA | 149.5 | °C/W | 8-pin SOIC package | 154 | ||
| Thermal Resistance Junction to Case | θJC | 39.9 | °C/W | 8-pin SOIC package | 154 | ||
| Die Temperature | TDIE | 150 | °C | 154 | |||
| Internal Calibrated INTOSC Frequency (4 MHz), 1% | INTOSC | 3.96 | 4 | 4.04 | MHz | VDD = 3.5V, TA = 25°C | 157 |
| Internal Calibrated INTOSC Frequency (4 MHz), 5% | INTOSC | 3.8 | 4 | 4.2 | MHz | 2.0V <= VDD <= 5.5V, -40°C <= TA <= +85°C (Ind.) | 157 |
| Internal Calibrated INTOSC Frequency (8 MHz), 1% | INTOSC | 7.92 | 8 | 8.08 | MHz | VDD = 3.5V, TA = 25°C | 157 |
| Internal Calibrated INTOSC Frequency (8 MHz), 5% | INTOSC | 7.6 | 8 | 8.4 | MHz | 2.0V <= VDD <= 5.5V, -40°C <= TA <= +85°C (Ind.) | 157 |
| Brown-out Reset Voltage | VBOR | 2 | 2.15 | 2.3 | V | 160 | |
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | 160 | |
| Watchdog Timer Time-out Period (No Prescaler) | TWDT | 10 | 20 | 30 | ms | VDD = 5V, -40°C to +85°C | 160 |
| Shunt Voltage | VSHUNT | 4.75 | 5 | 5.4 | V | 163 | |
| Shunt Current | ISHUNT | 4 | 50 | mA | 163 | ||
| Shunt Load Capacitance | CLOAD | 0.01 | 10 | µF | Bypass capacitor on VDD pin | 163 | |
| Regulator operating current | ISNT | 180 | µA | Includes band gap reference current | 163 | ||
| Comparator Input Offset Voltage | VOS | 5 | 10 | mV | 162 | ||
| A/D Integral Error | EIL | 1 | LSb | VREF = 5.12V | 164 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | SN = 8-lead Small Outline (150 mil) (SOIC) MS = Micro Small Outline (MSOP) | 211 |
CAD (KiCad official)
- Symbol:
PIC12HV615-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pic12hv615-i-etched.step/pic12hv615-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12hv615-i.step/pic12hv615-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (212 pp, sha256
dc273ef045b5c299, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC12HV615-I/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC12HV615-I/MF