component
AD8515AKSZ
Public Made by Adomby adom
UMW Operational Amplifier, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAD8515AKSZ
UMW · Operational Amplifier · SC-70-5
AD8515AKSZ from UMW, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings rail-to-rail; the datasheet gives a 20 mA typical short-circuit limit and says output short-circuit duration to GND should follow the derating curves. |
| 2 | V- | power_in | Negative supply pin, which is GND in single-supply operation; the part runs from 1.8 V to 5 V single supply with a 6 V absolute maximum supply voltage. |
| 3 | +IN | input | Non-inverting input; the input voltage range is 0 to VS and absolute maximum input voltage is limited to GND to VS. |
| 4 | -IN | input | Inverting input; the input voltage range is 0 to VS and absolute maximum input voltage is limited to GND to VS. |
| 5 | V+ | power_in | Positive supply pin, operating from 1.8 V to 5 V single supply with a 6 V absolute maximum supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UMW |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
AD8515AKSZ - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
ad8515aksz-etched.step/ad8515aksz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8515aksz.step/ad8515aksz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UMW datasheet (12 pp, sha256
15d609ffd9b3858e, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).