3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS65124RGTR
Texas Instruments · LCD Drivers · VQFN-16-EP(3x3)
TPS65124RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin of the multiple-output DC-DC converter that must be terminated and not left floating; a simultaneous logic-high on EN and RUN enables the converter and a logic-low shuts down the device. |
| 2 | RUN | input | Controls the external P-Channel MOSFET, must be terminated and not left floating, and forcing it to a logic-high level turns on the external MOSFET switch. |
| 3 | ENVGL | input | Enable pin for the negative output (VGL) on TPS65124, which must be terminated and not left floating. |
| 4 | ENVGH | input | Enable pin for the positive output (VGH) on TPS65124, which must be terminated and not left floating. |
| 5 | FBL | input | Feedback pin for the negative output voltage divider, which regulates to 0 V nominal; the feedback resistor divider connects between VGL and the main output. |
| 6 | FBM | input | Feedback pin for the main output voltage divider, which regulates to 1.213 V nominal. |
| 7 | AGND | power_in | Analog ground that must be connected to power ground (PGND) underneath the IC. |
| 8 | VMAIN | input | Main output, post-regulated to provide a low-ripple source drive voltage for the LCD display. |
| 9 | FBH | input | Feedback pin for the positive output voltage divider, which regulates to 1.213 V nominal. |
| 10 | VGH | output | Positive output, boosted up to 20 V for the LCD gate drive. |
| 11 | BOOT | output | Provides a bootstrapped supply for the rectifier MOSFET driver, enabling the MOSFET gate to be driven above the output voltage. |
| 12 | PGND | power_in | Power ground that must be connected to AGND underneath the IC. |
| 13 | SWP | bidirectional | Connects the inductor and is connected to the drain of the low-side MOSFET switch. |
| 14 | SWN | bidirectional | Connects the inductor and is connected to the source of the high-side MOSFET switch. |
| 15 | VIN | power_in | Input voltage pin of the device, specified for full-load operation from 2.7 V to 5.5 V. |
| 16 | GATE | bidirectional | Gate driver output to an external small P-Channel MOSFET, or an active high control input; pulling GATE above the 1.4 V logic-high level and RUN to logic-low disables the integrated active power-down sequencing. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | -0.3 | 6 | V | 2 | ||
| Voltage at SWP | SWP | -0.3 | 23 | V | 2 | ||
| Voltage at VGH | VGH | -0.3 | 21 | V | 2 | ||
| Voltage at VMAIN, LDOIN, LDOOUT, ENVGL, ENVGH | VMAIN, LDOIN, LDOOUT, ENVGL, ENVGH | -0.3 | 6 | V | 2 | ||
| Voltage at BOOT | BOOT | -0.3 | 6.2 | V | 2 | ||
| Operating temperature range | -40 | 85 | °C | 2 | |||
| Maximum operating junction temperature | TJ(max) | 135 | °C | 2 | |||
| Storage temperature range | -65 | 150 | °C | printed as 65°C to 150°C | 2 | ||
| Input voltage for full load operation | VIN | 2.7 | 5.5 | V | RL_MAIN≥330Ω at VMAIN=5V, RL_VGH≥12kΩ at VGH=12V, RL_VGL≥12kΩ at VGL=-12V, VLDOIN=GND, TA=-40°C to 85°C | 3 | |
| Minimum input voltage for start-up | VIN | 2.5 | V | RL_MAIN≥660Ω at VMAIN=5V, RL_VGH≥24kΩ at VGH=12V, RL_VGL≥24kΩ at VGL=-12V, VLDOIN=GND, TA=-20°C to 85°C | 3 | ||
| Main output voltage range | VMAIN | 3 | 5.6 | V | 4 | ||
| Maximum main output current | IMAIN | 25 | mA | VMAIN≤5.3 V | 4 | ||
| Maximum main output current | IMAIN | 7.5 | mA | VMAIN≥5.3 V | 4 | ||
| Feedback regulation voltage | VFBM | 1.203 | 1.213 | 1.223 | V | 2.7 V≤VIN≤5.5 V, 100 µA≤IMAIN≤25 mA, TA=-20°C to 50°C | 4 |
| Feedback regulation voltage | VFBM | 1.195 | 1.213 | 1.231 | V | 2.7 V≤VIN≤5.5 V, 0 mA≤IMAIN≤25 mA | 4 |
| VGH output voltage range | VGH | 20 | V | min VIN + 0.5 V | 4 | ||
| Maximum DC output current | IGH | 6 | mA | 4 | |||
| Feedback regulation voltage | VFBH | 1.177 | 1.213 | 1.249 | V | 2.7 V≤VIN≤5.5 V, 0 mA≤IGH≤2 mA | 4 |
| VGL output voltage range | VGL | -18 | -2.5 | V | 4 | ||
| Feedback regulation voltage | VFBL | -0.036 | 0 | 0.036 | V | 2.7 V≤VIN≤5.5 V, 0 mA≤IGL≤2 mA | 4 |
| Input voltage range | VLDOIN | 2.5 | 5.8 | V | 5 | ||
| Maximum output current | ILDOOUT | 20 | mA | 5 | |||
| Total accuracy | -3 | 3 | % | 2.5 V≤VLDOIN≤5.5 V, 0 mA≤ILDOOUT≤20 mA | 5 | ||
| Linear regulator quiescent current | IQ_LDO | 11 | 20 | µA | VLDOIN=VLDOOUT+0.4 V (min 2.5 V), TA=25°C | 5 | |
| Linear regulator shutdown current | ISD_LDO | 0.2 | 1 | µA | GATE=VIN | 5 | |
| Undervoltage lockout threshold | VUVLO | 2.15 | 2.3 | V | VIN falling | 5 | |
| High level input voltage | VIH | 1.4 | V | EN, RUN, ENVGL, ENVGH | 5 | ||
| Low level input voltage | VIL | 0.4 | V | EN, RUN, ENVGL, ENVGH | 5 | ||
| Logic input leakage current | ILKG | 0.01 | 0.1 | µA | ENVGL, ENVGH = VIN or GND (TPS65124) | 5 | |
| Output power on VGH | PGH | 35 | mW | VIN≥2.7 V, VLDOIN=ENVGH=ENVGL=GND | 3 | ||
| Output power on VGH | PGH | 15 | mW | VIN≥2.5 V, VLDOIN=ENVGH=ENVGL=GND | 3 | ||
| Output power on VGL | PGL | 35 | mW | VIN≥2.7 V, VLDOIN=ENVGH=ENVGL=GND | 3 | ||
| Output power on VGL | PGL | 15 | mW | VIN≥2.5 V, VLDOIN=ENVGH=ENVGL=GND | 3 | ||
| Total output power on VBOOT + VGH + VGL | PTOT | 60 | mW | VIN≥2.5 V | 3 | ||
| Total output power on VBOOT + VGH + VGL | PTOT | 120 | mW | VIN≥2.7 V | 3 | ||
| Total output power on VBOOT + VGH + VGL | PTOT | 150 | mW | VIN≥3 V | 3 | ||
| Total output power on VBOOT + VGH + VGL | PTOT | 250 | mW | VIN≥4.5 V | 3 | ||
| P-MOS1 current limit | ILIM | 150 | 200 | mA | 2.7 V≤VIN≤5.5 V | 3 | |
| P-MOS1 switch on-resistance | rDS(ON) | 2.5 | 4.3 | Ω | VIN=VGS=3.6 V | 3 | |
| P-MOS1 switch on-resistance | rDS(ON) | 3.8 | 6.9 | Ω | VIN=VGS=2.5 V | 3 | |
| N-MOS1 switch on-resistance | rDS(ON) | 1.9 | 3.5 | Ω | VBOOT=VGS=3.7 V | 3 | |
| N-MOS1 switch on-resistance | rDS(ON) | 1.4 | 2.3 | Ω | VBOOT=VGS=5 V | 3 | |
| N-MOS2 + P-MOS2 forward voltage drop | 400 | 600 | mV | VGS=VBOOT=5.5 V, VSWP=2 V, IBOOT=ID=50 mA | 3 | ||
| N-MOS3 + D1 forward voltage drop | 900 | 1100 | mV | VGS=VBOOT=5.5 V, VSWP=2 V, IGH=ID=50 mA | 3 | ||
| Quiescent current into VIN | IQ | 140 | 170 | µA | IMAIN=IGH=IGL=0 mA, VGH=+15 V, VGL=-15 V, VMAIN=5 V, VFBH=VFBM=+1.5 V, VFBL=-0.2 V, VBOOT=5.25 V | 3 | |
| Quiescent current into BOOT | IQ | 30 | 60 | µA | same as quiescent current into VIN | 3 | |
| Quiescent current into VGH | IQ | 0.1 | 1 | µA | VLDOIN=GND, EN=RUN=VIN, TA=25°C | 3 | |
| Shutdown current | ISD | 0.1 | 1 | µA | TA=25°C | 3 | |
| Feedback input bias current | IFBM | 0.01 | 0.1 | µA | VFBM=VREF | 4 | |
| Package thermal resistance junction to ambient | RθJA | 68 | °C/W | RGT package | 2 | ||
| Derating factor above TA = 25°C | 15 | mW/°C | RGT package | 2 | |||
| Core converter efficiency | η | 83 | % | VMAIN=5.0 V, IBOOT=20 mA, VGH=15 V, VGL=-10 V, IGH=IGL=100 µA, VLDOIN=GND | 3 | ||
| Switching frequency | f | 4 | MHz | RL_MAIN=250 Ω at VMAIN=5 V, VLDOIN=ENVGH=ENVGL=GND | 3 | ||
| Minimum dropout voltage | 130 | mV | IMAIN=10 mA | 4 | |||
| P-MOS1 start-up current limit | ISTART-UP | 65 | mA | 2.7 V≤VIN≤5.5 V | 3 | ||
| Load regulation | 0.006 | %/mA | IMAIN=0 to 25 mA, VMAIN=5 V | 4 | |||
| Load regulation | -0.11 | %/mA | IGH=0 to 2 mA, VGH=15 V | 4 | |||
| Line regulation | 0.01 | %/V | VIN=2.7 V to 5.5 V, IGH=100 µA | 4 | |||
| Load regulation | 0.13 | %/mA | IGL=0 to 2 mA, VGL=-15 V | 4 | |||
| Line regulation | 0.1 | %/V | VIN=2.7 V to 5.5 V, IGL=100 µA | 4 | |||
| Load regulation | 0.006 | %/mA | ILDOOUT=0 to 20 mA | 5 | |||
| Line regulation | 0.013 | %/V | VLDOIN=VLDOOUT+0.5 V (min 2.5 V) to 5.5 V, ILDOOUT=20 mA | 5 | |||
| EN, RUN pin pull-down resistance | 100 | kΩ | EN, RUN ≤0.4 V | 5 |
CAD (KiCad official)
- Symbol:
TPS65124RGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps65124rgtr-etched.step/tps65124rgtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65124rgtr.step/tps65124rgtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
12e8bf4eb7e171b4, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).