Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

Q3898156ZWGAC

JYJE · Crystals · DT-38

Q3898156ZWGAC from JYJE, in a DT-38. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of a two-terminal crystal; either orientation.
2 2 passive Terminal 2 of a two-terminal crystal; either orientation.

Key specifications

Parameter Value
Manufacturer JYJE
Package DT-38
Category Crystals, Oscillators, Resonators
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Nominal Frequency F0 9.81563 MHz nominal, as printed for this MPN 2
Frequency Tolerance ΔF/F0 -20 20 ppm At 25℃±3℃ 2
Frequency Stability TC -20 20 ppm over operating temperature range (no condition printed) 2
Aging Per Year Fa -3 3 ppm First Year 2
Operating Temperature Range TOPR -20 70 ℃ operating range 2
Storage Temperature TSTG -40 85 ℃ storage range 2
Insulation Resistance IR 100 MΩ At 100VDC 2
Equivalent Series Resistance ESR 70 Ω no condition printed; column placement ambiguous, see review 2
Drive Level DL 100 μW no condition printed; column placement ambiguous, see review 2
Frequency change after drop test 5 ppm free drop 50 cm, 3 times on hard wooden board 5
Frequency change after shake test 5 ppm shake 10~55 Hz, 1.5 mm swing, x/y/z, 30 min 5
Insulation resistance after airproof test IR 500 MΩ pressure 0.4~0.5 MPa, 10 min 5
Frequency change after humidity test 5 ppm +40±2℃, 90~95% R.H., 250 h 5
Frequency change after low temperature test 5 ppm -30±2℃, 250 h 5
Frequency change after high temperature test 5 ppm +85±2℃, 250 h 5
Frequency change after temperature cycling test 5 ppm -30±3℃/30 min to +85±2℃/30 min, 5 cycles 5
Solder temperature 260 ℃ 10 seconds, weld test 5

CAD (KiCad official)

  • Symbol: Q3898156ZWGAC
  • Footprint: Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Vertical
  • 3D model: DT-38 (KiCad packages3D, STEP)
  • 3D model files: q3898156zwgac-etched.step / q3898156zwgac-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); q3898156zwgac.step / q3898156zwgac.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JYJE datasheet (6 pp, sha256 ``, retrieved 2026-10-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary crystal numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF