component
FIF485
Public Made by Adomby adom
Full-Way RS-485/RS-422 ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFIF485
Full-Way · RS-485/RS-422 ICs · SOP-8
FIF485 from Full-Way, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output (接收输出端), high when the receiver input is open or shorted, per the receiver truth table. |
| 2 | RE | input | Receiver enable, active low; when high, the receiver output is high impedance. |
| 3 | DE | input | Driver enable, active high; when DE is low the driver output is high impedance, and DE high with RE low places the chip in the receive state only when DE is low. |
| 4 | DI | input | Driver data input (发送数据输入端) that sets the driver outputs A and B when DE is high. |
| 5 | GND | power_in | Ground reference; all voltages are referenced to ground. |
| 6 | A | bidirectional | Receiver input and driver output (接收输入端/发送输出端), with a common-mode range of -7 V to +12 V. |
| 7 | B | bidirectional | Receiver input and driver output (接收输入端/发送输出端), with a common-mode range of -7 V to +12 V. |
| 8 | Vcc | power_in | Power supply, operating range 4.5 V to 5.5 V with an absolute maximum of +6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Full-Way |
| Package | SOP-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | 6 | V | 3 | |||
| Control input voltage (DE, RE) | -0.5 | 6 | V | 3 | |||
| Driver input voltage (DI) | -0.5 | 6 | V | 3 | |||
| Driver output voltage (A, B) | -7 | 12 | V | 3 | |||
| Receiver input voltage (A, B) | -7 | 12 | V | 3 | |||
| Receiver output voltage (RO) | -0.3 | V | printed max is VCC+0.3 | 3 | |||
| Storage temperature range | TSTG | -55 | 150 | °C | 3 | ||
| Operating temperature range | TOP | -40 | 85 | °C | 3 | ||
| Maximum operating temperature range | TMDP | -55 | 125 | °C | 3 | ||
| Continuous power dissipation, 8-pin plastic SOP | 470 | mW | above +70°C | 3 | |||
| Soldering temperature | 300 | °C | 10 s | 3 | |||
| Operating voltage range | VCC | 4.5 | 5.5 | V | 4 | ||
| Driver differential output, no load | VDD1 | 5 | V | 4 | |||
| Driver differential output, loaded | VDD2 | 1.5 | V | Fig. 1, R=54Ω or R=27Ω | 4 | ||
| Change in magnitude of driver differential output voltage | △VOD | 0.2 | V | 4 | |||
| Driver common-mode output voltage | VOC | 1 | 3 | V | 4 | ||
| Change in magnitude of driver common-mode output voltage | △VOC | 0.2 | V | 4 | |||
| Input high voltage | VIH | 2 | V | DE, RE, DI | 4 | ||
| Input low voltage | VIL | 0.8 | V | DE, RE, DI | 4 | ||
| Input current | IIN1 | 2 | uA | DE, RE, DI | 4 | ||
| Input current (A, B) | IIN2 | 40 | 90 | uA | DE=0V, VCC=5V, VIN=5V | 4 | |
| Input current (A, B) | IIN2 | 60 | 100 | uA | DE=0V, VCC=5V, VIN=0V | 4 | |
| Receiver differential input threshold voltage | VTN | -200 | -50 | mV | -7V ≤ VCM ≤ +12V | 4 | |
| Receiver output high voltage | VOH | 4 | V | IO=-4mA | 4 | ||
| Receiver output low voltage | VOL | 0.4 | V | IO=4mA | 4 | ||
| Receiver tri-state (high-impedance) output current | IOZR | 1 | uA | 0.4V ≤ Vo ≤ 2.4V | 4 | ||
| Receiver input resistance | RIN | 96 | kΩ | -7V ≤ VCM ≤ +12V | 4 | ||
| No-load supply current | ICC | 480 | 600 | uA | No load, RE=DI=GND or VCC, DE=VCC | 4 | |
| No-load supply current | ICC | 450 | 600 | uA | No load, RE=DI=GND or VCC, DE=GND | 4 | |
| Receiver output short-circuit current | IOSR | 95 | mA | 0V ≤ VRO ≤ VCC | 4 | ||
| ESD protection, human body model | -8 | 8 | kV | Between A and B, human body model | 4 | ||
| Driver input to output propagation delay (tDPLH) | tDPLH | 34 | 60 | nS | Fig. 3 and 5, RDIFF=50Ω, CL1=CL2=100pF | 5 | |
| Driver input to output propagation delay (tDPHL) | tDPHL | 34 | 60 | nS | Fig. 3 and 5, RDIFF=50Ω, CL1=CL2=100pF | 5 | |
| Driver output skew | tDSKEW | -10 | -2.5 | 10 | nS | 5 | |
| Driver rise time | tDR | 10 | 25 | nS | 5 | ||
| Driver fall time | tDF | 10 | 25 | nS | 5 | ||
| Driver enable to output high | tDZH | 150 | nS | Fig. 4 and 6, CL=100pF, S2 closed | 5 | ||
| Driver enable to output low | tDZL | 150 | nS | Fig. 4 and 6, CL=100pF, S1 closed | 5 | ||
| Driver low to disable | tDLZ | 100 | nS | Fig. 4 and 6, CL=15pF, S1 closed | 5 | ||
| Driver high to disable | tDHZ | 100 | nS | Fig. 4 and 6, CL=15pF, S2 closed | 5 | ||
| Receiver input to output propagation delay (tRPLH) | tRPLH | 150 | nS | Fig. 7 and 9, /VID/≥2.0V | 5 | ||
| Receiver input to output propagation delay (tRPHL) | tRPHL | 150 | nS | Fig. 7 and 9, /VID/≥2.0V | 5 | ||
| Receiver skew | tRSKEW | -10 | 0 | 10 | nS | VID rise and fall time ≤15ns | 5 |
| Receiver enable to output low | tRZL | 20 | 50 | nS | Fig. 2 and 8, CL=100pF, S1 closed | 5 | |
| Receiver enable to output high | tRZH | 20 | 50 | nS | Fig. 2 and 8, CL=100pF, S2 closed | 5 | |
| Receiver low to disable | tRLZ | 20 | 50 | nS | Fig. 2 and 8, CL=100pF, S1 closed | 5 | |
| Receiver high to disable | tRHZ | 20 | 50 | nS | Fig. 2 and 8, CL=100pF, S2 closed | 5 | |
| Driver output short-circuit current | IOD | 100 | mA | A to B short-circuit | 5 | ||
| Maximum data rate | fMAX | 10 | Mbps | 5 |
CAD (KiCad official)
- Symbol:
FIF485 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
fif485-etched.step/fif485-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fif485.step/fif485.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Full-Way datasheet (12 pp, sha256
af263d88d4d3e34a, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).