3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownFH19SC-22S-0.5SH
HRS(Hirose) · FFC, FPC (Flat Flexible) Connector Assemblies · SMD, P=0.5mm, SMD horizontal
FH19SC-22S-0.5SH from HRS(Hirose), in a SMD, P=0.5mm, SMD horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
| 10 | 10 | passive | Contact 10; numbering follows the footprint. |
| 11 | 11 | passive | Contact 11; numbering follows the footprint. |
| 12 | 12 | passive | Contact 12; numbering follows the footprint. |
| 13 | 13 | passive | Contact 13; numbering follows the footprint. |
| 14 | 14 | passive | Contact 14; numbering follows the footprint. |
| 15 | 15 | passive | Contact 15; numbering follows the footprint. |
| 16 | 16 | passive | Contact 16; numbering follows the footprint. |
| 17 | 17 | passive | Contact 17; numbering follows the footprint. |
| 18 | 18 | passive | Contact 18; numbering follows the footprint. |
| 19 | 19 | passive | Contact 19; numbering follows the footprint. |
| 20 | 20 | passive | Contact 20; numbering follows the footprint. |
| 21 | 21 | passive | Contact 21; numbering follows the footprint. |
| 22 | 22 | passive | Contact 22; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HRS(Hirose) |
| Package | SMD, P=0.5mm, SMD horizontal |
| Category | Connectors |
| Pins | 22 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current rating | 0.5 | A | Note 1: when passing current through all contacts, use 70% of rating | 2 | |||
| Voltage rating | 50 | V AC | 2 | ||||
| Operating temperature range | -55 | 85 | °C | Includes temperature rise caused by current flow | 2 | ||
| Storage temperature range | -10 | 50 | °C | Long-period storage prior to mounting and use | 2 | ||
| Operating humidity range | 90 | %RH | No condensation | 2 | |||
| Storage humidity range | 90 | %RH | No condensation | 2 | |||
| Insulation resistance | 500 | M ohms | 100 V DC | 2 | |||
| Contact resistance | 100 | m ohms | 1 mA, including FPC/FFC conductor resistance | 2 | |||
| Contact resistance after durability | 100 | m ohms | 20 cycles (insertion/withdrawal) | 2 | |||
| Insulation resistance after humidity | 100 | M ohms | Humidity (steady state): 96 hours at 40°C and 90 to 95% | 2 | |||
| Insulation resistance after temperature cycle | 100 | M ohms | 5 cycles, -55°C / +15 to +35°C / +85°C / +15 to +35°C | 2 | |||
| Withstanding voltage | 150 | V AC | 1 minute, no flashover or insulation breakdown | 2 | |||
| Reflow peak temperature | 250 | °C | Recommended temperature profile | 8 | |||
| Contact pitch | 0.5 | mm | 22 contacts | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Rotating actuator permits easy insertion and reliable connection with the FPC & FFC. | 1 | |
| contacts | Phosphor bronze | gold | Contacts Phosphor bronze Gold plated ------- | 2 |
CAD (Adom-generated)
- Symbol:
FH19SC-22S-0.5SH - Footprint:
Adom_Gen:HRS_Hirose__FH19_1771ba - 3D model: generated to fit the land (STEP)
- 3D model files:
fh19sc-22s-0-5sh-etched.step/fh19sc-22s-0-5sh-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fh19sc-22s-0-5sh.step/fh19sc-22s-0-5sh.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HRS(Hirose) datasheet (12 pp, sha256 ``, retrieved 2026-11-17, tier: lcsc)
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.