3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32L073CZT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
STM32L073CZT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD supply pin for the internal step-up converter or an external LCD voltage (up to 3.6 V), decoupled with a Cext of 0.1 to 2 µF. |
| 2 | PC13 | bidirectional | 5 V tolerant GPIO (FT) with additional functions RTC_TAMP1/RTC_TS/RTC_OUT and WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant GPIO (FT) that serves as the LSE 32.768 kHz oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) that serves as the LSE 32.768 kHz oscillator output OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O (TC) that serves as the HSE 1 to 25 MHz oscillator input OSC_IN, with alternate function USB_CRS_SYNC. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O (TC) that serves as the HSE oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Active-low bidirectional reset pin with embedded weak pull-up (RPU 25 to 65 kΩ), with VIL(NRST) max 0.8 V. |
| 8 | VSSA | power_in | Analog ground for ADC, RCs and PLL, which must be connected to VSS. |
| 9 | VDDA | power_in | Analog supply for ADC, RCs and PLL, 1.65 to 3.6 V (1.8 to 3.6 V with all analog features), which must be the same voltage as VDD. |
| 10 | PA0 | bidirectional | Standard 3.3 V I/O (TC) with alternate functions TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1. |
| 11 | PA1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions EVENTOUT, LCD_SEG0, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, and additional functions COMP1_INP and ADC_IN1. |
| 12 | PA2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM21_CH1, LCD_SEG1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT, and additional functions COMP2_INM and ADC_IN2. |
| 13 | PA3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM21_CH2, LCD_SEG2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX, and additional functions COMP2_INP and ADC_IN3. |
| 14 | PA4 | bidirectional | Standard 3.3 V I/O (TC) with reduced touch sensing sensitivity, recommended for use as a sampling capacitor I/O, with alternate functions SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, and additional functions COMP1_INM, COMP2_INM, ADC_IN4 and DAC_OUT1. |
| 15 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with alternate functions SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, and additional functions COMP1_INM, COMP2_INM, ADC_IN5 and DAC_OUT2. |
| 16 | PA6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MISO, LCD_SEG3, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 17 | PA7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, LCD_SEG4, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 18 | PB0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions EVENTOUT, LCD_SEG5, TIM3_CH3 and TSC_G3_IO2, and additional functions LCD_VLCD3, ADC_IN8 and VREF_OUT. |
| 19 | PB1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions LCD_SEG6, TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT. |
| 20 | PB2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions LPTIM1_OUT, TSC_G3_IO4 and I2C3_SMBA, and additional function LCD_VLCD2. |
| 21 | PB10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions LCD_SEG10, TIM2_CH3, TSC_SYNC, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX. |
| 22 | PB11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions EVENTOUT, LCD_SEG11, TIM2_CH4, TSC_G6_IO1, LPUART1_RX, I2C2_SDA and LPUART1_TX. |
| 23 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
| 24 | VDD | power_in | Digital supply for I/Os and the internal regulator, 1.65 to 3.6 V (1.8 to 3.6 V with BOR enabled). |
| 25 | PB12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_NSS/I2S2_WS, LCD_SEG12, LPUART1_RTS/LPUART1_DE, TSC_G6_IO2, I2C2_SMBA and EVENTOUT, and additional function LCD_VLCD1. |
| 26 | PB13 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions SPI2_SCK/I2S2_CK, LCD_SEG13, MCO, TSC_G6_IO3, LPUART1_CTS, I2C2_SCL and TIM21_CH1. |
| 27 | PB14 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions SPI2_MISO/I2S2_MCK, LCD_SEG14, RTC_OUT, TSC_G6_IO4, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2. |
| 28 | PB15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_MOSI/I2S2_SD, LCD_SEG15 and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions MCO, LCD_COM0, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL. |
| 30 | PA9 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions MCO, LCD_COM1, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA. |
| 31 | PA10 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions LCD_COM2, TSC_G4_IO2, USART1_RX and I2C1_SDA. |
| 32 | PA11 | bidirectional | 5 V tolerant I/O (FT) powered from VDD_USB, with alternate functions SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, and additional function USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant I/O (FT) powered from VDD_USB, with alternate functions SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, and additional function USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SWDIO, USB_NOE and LPUART1_RX. |
| 35 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
| 36 | VDD_USB | power_in | USB transceiver supply for PA11 and PA12, which must be above 3.0 V when USB is used, otherwise tied to VDD or VSS. |
| 37 | PA14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SWCLK, USART2_TX and LPUART1_TX. |
| 38 | PA15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_NSS, LCD_SEG17, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE. |
| 39 | PB3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_SCK, LCD_SEG7, TIM2_CH2, TSC_G5_IO1, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX, and additional function COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions SPI1_MISO, LCD_SEG8, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, and additional function COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, LCD_SEG9, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, and additional function COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, and additional function COMP2_INP. |
| 43 | PB7 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS, and additional functions COMP2_INP and PVD_IN. |
| 44 | BOOT0 | input | Input-only boot pin sampled at startup together with the nBOOT1 option bit to select Flash, System memory or embedded RAM boot, with an input range of 0 to 5.5 V. |
| 45 | PB8 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions LCD_SEG16, TSC_SYNC and I2C1_SCL. |
| 46 | PB9 | bidirectional | 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions LCD_COM3, EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS. |
| 47 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
| 48 | VDD | power_in | Digital supply for I/Os and the internal regulator, 1.65 to 3.6 V (1.8 to 3.6 V with BOR enabled). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD_USB, VDD) | VDD-VSS | -0.3 | 4 | V | 67 | ||
| Input voltage on TC pins | VIN | 4 | V | Input voltage on TC pin | 67 | ||
| Input voltage on any other pin | VIN | 4 | V | Input voltage on any other pin | 67 | ||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 67 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 67 | |||
| Variations between all different ground pins including VREF- pin | /ΔVSS/ | 50 | mV | 67 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 67 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 68 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 68 | |||
| Total current into VDD_USB power lines (source) | ΣIVDD_USB | 25 | mA | 68 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 68 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 68 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 68 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 68 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 68 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 68 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | PA11 and PA12 | 68 | ||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 68 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 68 | ||
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 68 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 68 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 68 | ||
| Maximum junction temperature | TJ | 150 | °C | 68 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 69 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 69 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 69 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 69 | |
| Analog operating voltage (DAC not used) | VDDA | 1.65 | 3.6 | V | DAC not used; must be the same voltage as VDD | 69 | |
| Analog operating voltage (all features) | VDDA | 1.8 | 3.6 | V | All features; must be the same voltage as VDD | 69 | |
| Standard operating voltage, USB domain | VDD_USB | 3 | 3.6 | V | USB peripheral used | 69 | |
| Standard operating voltage, USB domain | VDD_USB | 0 | 3.6 | V | USB peripheral not used | 69 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 69 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 69 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 69 | ||
| Power dissipation LQFP48 at TA = 85 °C | PD | 370 | mW | TA = 85 °C (range 6) or TA = 105 °C (range 7) | 69 | ||
| Power dissipation LQFP48 at TA = 125 °C | PD | 93 | mW | TA = 125 °C (range 3) | 69 | ||
| Temperature range (range 6) | TA | -40 | 85 | °C | Maximum power dissipation (range 6) | 70 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 70 | |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 71 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 71 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 71 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 71 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 71 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 71 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 71 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 71 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 71 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 71 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 71 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 71 |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 71 | |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 71 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 72 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 72 | |
| High-speed external user clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 88 |
| Low-speed external user clock source frequency | fLSE_ext | 1 | 32.768 | 1000 | kHz | 89 |
CAD (KiCad official)
- Symbol:
STM32L073CZT6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l073czt6-etched.step/stm32l073czt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l073czt6.step/stm32l073czt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (157 pp, sha256
d574d5fba68fb5bd, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).