component
TLIN10285SDRQ1
Public Made by Adomby adom
Texas Instruments LIN Transceivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLIN10285SDRQ1
Texas Instruments · LIN Transceivers · SOIC-8
TLIN10285SDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSUP | power_in | Device supply input, connected to the battery through an external reverse-blocking diode; recommended VSUP is 5.5 V to 28 V with a 100 nF VSUP capacitor. |
| 2 | EN | input | Enable input that selects the transceiver mode (EN = VCC for normal mode, EN = 0 V for standby mode per the electrical characteristics). |
| 3 | GND | power_in | Ground reference; when the thermal pad is present it must be soldered to the ground plane. |
| 4 | LIN | bidirectional | High-voltage LIN bus single-wire transmitter and receiver, rated for ±58 V LIN bus fault protection and a recommended bus input voltage of 0 V to 28 V. |
| 5 | RXD | output | Open-drain digital output that reports the state of the LIN bus voltage to the microcontroller; recommended maximum LOW output current is 2 mA. |
| 6 | TXD | input | Digital input that controls the state of the LIN bus output; logic input rated up to 6 V absolute maximum. |
| 7 | nRST | output | Active-low reset output; reset output current is limited to 5 mA absolute maximum. |
| 8 | VCC | power_out | Output of the integrated LDO regulator (3.3 V or 5 V), which requires a 10 µF VCC capacitor with ESR of 0.001 Ω to 2 Ω; the device supplies up to 70 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TLIN10285SDRQ1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tlin10285sdrq1-etched.step/tlin10285sdrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlin10285sdrq1.step/tlin10285sdrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
1334ffb6c661c5a6, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).