Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SIT1602AI-22-33E-50.000000D

SiTime · Programmable Oscillators · SMD3225-4P

SIT1602AI-22-33E-50.000000D from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST input Output enable (OE part, as the E feature code in this MPN indicates): H or open gives the specified frequency output, L puts only the output driver into high impedance; the input has a pull-up of 87 kΩ typical and 100 kΩ maximum, and VIH/VIL are 70%/30% of Vdd.
2 GND power_in Electrical ground; a 0.1 µF capacitor between Vdd and GND is recommended.
3 OUT output Oscillator LVCMOS/HCMOS output with 45-55% duty cycle for all Vdd, and 20%-80% rise/fall time of 2 ns maximum at 2.25 V-3.63 V with 15 pF load.
4 VDD power_in Power supply voltage; the 3.3 V ordering code ("33") is rated 2.97 V to 3.63 V, with an absolute maximum of -0.5 V to 4 V.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -25 25 PPM Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load 1
Operating Temperature Range T_use -40 85 °C Industrial 1
Supply Voltage Vdd 2.97 3.3 3.63 V 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 1
Duty Cycle DC 45 55 % All Vdds 1
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) 1
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 1
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 1
Input Pull-up Impedance Z_in 87 100 k Pin 1, OE logic high or logic low, or ST logic high 1
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
RMS Period Jitter T_jitt 1.76 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
RMS Phase Jitter (random) T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 2
RMS Phase Jitter (random) T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 2
VDD Supply Voltage VDD -0.5 4 V 2
Electrostatic Discharge 2000 V 2
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 2
Junction Temperature 150 °C 2
Thermal Resistance Junction-to-Ambient, 4 Layer Board (3225 package) JA 109 °C/W 4 Layer Board, package 3225 2
Thermal Resistance Junction-to-Ambient, 2 Layer Board (3225 package) JA 212 °C/W 2 Layer Board, package 3225 2
Thermal Resistance Junction-to-Case, Bottom (3225 package) JC 27 °C/W Bottom, package 3225 2

CAD (KiCad official)

  • Symbol: SIT1602AI-22-33E-50.000000D
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602ai-22-33e-50-000000d-etched.step / sit1602ai-22-33e-50-000000d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602ai-22-33e-50-000000d.step / sit1602ai-22-33e-50-000000d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (16 pp, sha256 27329f82608fa95e, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF