Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM6823SWY6F

STMicroelectronics · Supervisor And Reset ICs · SOT-23-5

STM6823SWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST output Active-low, push-pull reset output; pulses low when triggered and stays low whenever VCC is below the reset threshold or MR is a logic low, remaining low for trec (200 ms typ.) after VCC rises above the threshold, a watchdog timeout, or MR goes from low to high.
2 VSS power_in Ground reference pin for the device.
3 MR input Active-low push-button manual reset input with an internal 52 kΩ pull-up; a logic low asserts RST and reset remains asserted for trec after MR returns high; can be driven by TTL/CMOS logic or a switch to GND, and may be left open if unused.
4 WDI input Watchdog input; if held high or low for at least tWD = 1.6 s (typ.) the internal watchdog timer expires and RST is asserted, the timer clears on a reset pulse or a rising/falling edge on WDI, and the watchdog can be disabled by leaving WDI unconnected or driving it from a tri-state output.
5 VCC power_in Supply voltage input monitored by the precision comparator for the reset threshold; operating range 1.2 V to 5.5 V (absolute maximum −0.3 V to 7.0 V).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: STM6823SWY6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: stm6823swy6f-etched.step / stm6823swy6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm6823swy6f.step / stm6823swy6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 ba50f0fd6706f830, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF