component
SSP62FJ3302PR
Public Made by Adomby adom
Shanghai Siproin Microelectronics Linear Voltage Regulators (LDO), SOT-89-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSSP62FJ3302PR
Shanghai Siproin Microelectronics · Linear Voltage Regulators (LDO) · SOT-89-3L
SSP62FJ3302PR from Shanghai Siproin Microelectronics, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin of the regulator, connected to the voltage reference and the output divider in the block diagram. |
| 2 | VIN | power_in | Supply input; absolute maximum supply voltage is -0.3V to 15V and the electrical table gives an input voltage of 13V. |
| 3 | VOUT | power_out | Regulated 3.3V output (±2% tolerance) for the SSP62FJ3302PR, with a built-in current limiter and a 350 mA typical output current at Vin-Vout=1V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-89-3L |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy tolerance | -2 | 2 | % | Output voltage accuracy, tolerance ±2% (per part number) | 1 | ||
| Supply Voltage | -0.3 | 15 | V | 2 | |||
| Operating Temperature | -40 | 85 | ℃ | 2 | |||
| Storage Temperature | -40 | 125 | ℃ | 2 | |||
| Input Voltage | Vin | 13 | V | 3 | |||
| Line Regulation | 0.05 | 0.2 | %/V | 1.6V≤Vin≤8V, Iout=100mA | 3 | ||
| Load Regulation | △Vout | 12 | 30 | mV | Vin= Vout+1V, 1.0mA≤Iout≤100mA | 3 | |
| Output voltage temperature coefficient | -100 | 100 | Ppm/℃ | Iout=30mA, 0℃≤Ta≤70℃ | 3 | ||
| Supply Current | Iss1 | 1.5 | 2.5 | uA | 3 | ||
| Dropout Voltage (3.0 < Vout ≤ 4.0, 100 mA) | Vdrop | 0.2 | 0.24 | V | 3.0 < Vout ≤ 4.0, Iout=100 mA | 3 | |
| Dropout Voltage (3.0 < Vout ≤ 4.0, 200 mA) | Vdrop | 0.42 | 0.44 | V | 3.0 < Vout ≤ 4.0, Iout=200 mA | 3 | |
| Dropout Voltage (3.0 < Vout ≤ 4.0, 350 mA) | Vdrop | 0.73 | 0.76 | V | 3.0 < Vout ≤ 4.0, Iout=350 mA | 3 | |
| Output Current | Iout | 350 | mA | Vin-Vout=1V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 40 | dB | F=1KHz, Vin=Vout+1V | 3 |
CAD (KiCad official)
- Symbol:
SSP62FJ3302PR - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
ssp62fj3302pr-etched.step/ssp62fj3302pr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ssp62fj3302pr.step/ssp62fj3302pr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (5 pp, sha256
0e8991e7e4161c84, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).