component
74HC2G14GV
Public Made by Adomby adom
Nexperia Inverters, TSOP-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74HC2G14GV
Nexperia · Inverters · TSOP-6
74HC2G14GV from Nexperia, in a TSOP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Data input for inverter 1; the input has Schmitt-trigger behavior and clamp diodes, so a current-limiting resistor can be used to interface it to voltages above VCC. |
| 2 | GND | power_in | Ground (0 V); all voltages in the datasheet are referenced to this pin. |
| 3 | 2A | input | Data input for inverter 2; the input has Schmitt-trigger behavior and clamp diodes, so a current-limiting resistor can be used to interface it to voltages above VCC. |
| 4 | 2Y | output | Data output of inverter 2, the logic inverse of input 2A (L input gives H output, H input gives L output). |
| 5 | VCC | power_in | Supply voltage; 74HC2G14 is specified for 2.0 V to 6.0 V and 74HCT2G14 for 4.5 V to 5.5 V. |
| 6 | 1Y | output | Data output of inverter 1, the logic inverse of input 1A (L input gives H output, H input gives L output). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSOP-6 |
| Category | Logic |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 7 | V | 3 | ||
| input clamping current | IIK | -20 | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 3 | |
| output clamping current | IOK | -20 | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 3 | |
| output current | IO | -25 | 25 | mA | VO = -0.5 V to VCC + 0.5 V | 3 | |
| supply current | ICC | 50 | mA | 3 | |||
| ground current | IGND | -50 | mA | 3 | |||
| storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| total power dissipation | Ptot | 250 | mW | 3 | |||
| supply voltage | VCC | 2 | 5 | 6 | V | 74HC2G14 | 3 |
| input voltage | VI | 0 | V | maximum printed as VCC | 3 | ||
| output voltage | VO | 0 | V | maximum printed as VCC | 3 | ||
| ambient temperature | Tamb | -40 | 25 | 125 | °C | 3 | |
| HIGH-level output voltage | VOH | 1.9 | 2 | V | Tamb = 25 °C; VI = VT+ or VT-; IO = -20 μA; VCC = 2.0 V | 4 | |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | V | Tamb = 25 °C; VI = VT+ or VT-; IO = -20 μA; VCC = 4.5 V | 4 | |
| HIGH-level output voltage | VOH | 5.9 | 6 | V | Tamb = 25 °C; VI = VT+ or VT-; IO = -20 μA; VCC = 6.0 V | 4 | |
| HIGH-level output voltage | VOH | 4.18 | 4.32 | V | Tamb = 25 °C; IO = -4.0 mA; VCC = 4.5 V | 4 | |
| HIGH-level output voltage | VOH | 5.68 | 5.81 | V | Tamb = 25 °C; IO = -5.2 mA; VCC = 6.0 V | 4 | |
| LOW-level output voltage | VOL | 0 | 0.1 | V | Tamb = 25 °C; VI = VT+ or VT-; IO = 20 μA; VCC = 2.0 V | 4 | |
| LOW-level output voltage | VOL | 0.15 | 0.26 | V | Tamb = 25 °C; IO = 4.0 mA; VCC = 4.5 V | 4 | |
| LOW-level output voltage | VOL | 0.16 | 0.26 | V | Tamb = 25 °C; IO = 5.2 mA; VCC = 6.0 V | 4 | |
| input leakage current | II | -0.1 | 0.1 | μA | Tamb = 25 °C; VI = GND or VCC; VCC = 6.0 V | 4 | |
| supply current | ICC | 1 | μA | Tamb = 25 °C; VI = GND or VCC; IO = 0 μA; VCC = 6.0 V | 4 | ||
| HIGH-level output voltage | VOH | 1.9 | V | Tamb = -40 °C to +125 °C; VI = VT+ or VT-; IO = -20 μA; VCC = 2.0 V | 5 | ||
| HIGH-level output voltage | VOH | 4.4 | V | Tamb = -40 °C to +125 °C; VI = VT+ or VT-; IO = -20 μA; VCC = 4.5 V | 5 | ||
| HIGH-level output voltage | VOH | 5.9 | V | Tamb = -40 °C to +125 °C; VI = VT+ or VT-; IO = -20 μA; VCC = 6.0 V | 5 | ||
| HIGH-level output voltage | VOH | 3.7 | V | Tamb = -40 °C to +125 °C; IO = -4.0 mA; VCC = 4.5 V | 5 | ||
| HIGH-level output voltage | VOH | 5.2 | V | Tamb = -40 °C to +125 °C; IO = -5.2 mA; VCC = 6.0 V | 5 | ||
| LOW-level output voltage | VOL | 0.1 | V | Tamb = -40 °C to +125 °C; VI = VT+ or VT-; IO = 20 μA; VCC = 2.0 V | 5 | ||
| LOW-level output voltage | VOL | 0.4 | V | Tamb = -40 °C to +125 °C; IO = 4.0 mA; VCC = 4.5 V | 5 | ||
| input leakage current | II | -1 | 1 | μA | Tamb = -40 °C to +125 °C; VI = GND or VCC; VCC = 6.0 V | 5 | |
| supply current | ICC | 20 | μA | Tamb = -40 °C to +125 °C; VI = GND or VCC; IO = 0 μA; VCC = 6.0 V | 5 | ||
| propagation delay | tpd | 190 | ns | nA to nY; see Fig. 5; VCC = 2.0 V; CL = 50 pF; Tamb = -40 °C to +125 °C | 6 | ||
| propagation delay | tpd | 38 | ns | nA to nY; see Fig. 5; VCC = 4.5 V; CL = 50 pF; Tamb = -40 °C to +125 °C | 6 | ||
| propagation delay | tpd | 32 | ns | nA to nY; see Fig. 5; VCC = 6.0 V; CL = 50 pF; Tamb = -40 °C to +125 °C | 6 | ||
| transition time | tt | 110 | ns | nY; see Fig. 5; VCC = 2.0 V; CL = 50 pF; Tamb = -40 °C to +125 °C | 6 | ||
| transition time | tt | 22 | ns | nY; see Fig. 5; VCC = 4.5 V; CL = 50 pF; Tamb = -40 °C to +125 °C | 6 | ||
| transition time | tt | 19 | ns | nY; see Fig. 5; VCC = 6.0 V; CL = 50 pF; Tamb = -40 °C to +125 °C | 6 | ||
| positive-going threshold voltage | VT+ | 1 | 1.5 | V | see Fig. 7, Fig. 8; VCC = 2.0 V; Tamb = -40 °C to +125 °C | 8 | |
| positive-going threshold voltage | VT+ | 2.3 | 3.15 | V | see Fig. 7, Fig. 8; VCC = 4.5 V; Tamb = -40 °C to +125 °C | 8 | |
| positive-going threshold voltage | VT+ | 3 | 4.2 | V | see Fig. 7, Fig. 8; VCC = 6.0 V; Tamb = -40 °C to +125 °C | 8 | |
| negative-going threshold voltage | VT- | 0.3 | 0.9 | V | see Fig. 7, Fig. 8; VCC = 2.0 V; Tamb = -40 °C to +125 °C | 8 | |
| negative-going threshold voltage | VT- | 1.13 | 2 | V | see Fig. 7, Fig. 8; VCC = 4.5 V; Tamb = -40 °C to +125 °C | 8 | |
| negative-going threshold voltage | VT- | 1.5 | 2.6 | V | see Fig. 7, Fig. 8; VCC = 6.0 V; Tamb = -40 °C to +125 °C | 8 | |
| hysteresis voltage | VH | 0.3 | 1 | V | (VT+ - VT-); see Fig. 7, Fig. 8 and Fig. 9; VCC = 2.0 V; Tamb = -40 °C to +125 °C | 8 | |
| hysteresis voltage | VH | 0.6 | 1.4 | V | (VT+ - VT-); see Fig. 7, Fig. 8 and Fig. 9; VCC = 4.5 V; Tamb = -40 °C to +125 °C | 8 | |
| hysteresis voltage | VH | 0.8 | 1.7 | V | (VT+ - VT-); see Fig. 7, Fig. 8 and Fig. 9; VCC = 6.0 V; Tamb = -40 °C to +125 °C | 8 | |
| total power dissipation derating (SOT457 package) | Ptot | 4.1 | mW/K | derates linearly above 89 °C; SOT457 (SC-74; TSOP6) package | 3 |
CAD (KiCad official)
- Symbol:
74HC2G14GV - Footprint:
Package_SO:TSOP-6_1.65x3.05mm_P0.95mm - 3D model: TSOP-6 (KiCad packages3D, STEP)
- 3D model files:
74hc2g14gv-etched.step/74hc2g14gv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hc2g14gv.step/74hc2g14gv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (16 pp, sha256
7cc56114dd5baf28, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).