3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1617ES5-1#TRMPBF
Analog Devices · DC-DC Converters · TSOT-23-5
LT1617ES5-1#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Collector of the internal NPN power switch, rated 36V maximum on the SW pin; minimize the metal trace area connected to this pin to reduce EMI. |
| 2 | GND | power_in | Ground pin that should be tied directly to the local ground plane. |
| 3 | NFB | input | Feedback pin that sets the output voltage through external resistors R1 and R2, with an absolute maximum voltage of -3V and current into the pin limited to -1mA. |
| 4 | SHDN | input | Shutdown pin that must be tied to 0.9V or higher to enable the device and below 0.25V to turn it off, with a 15V absolute maximum. |
| 5 | VIN | power_in | Input supply pin that should be bypassed with a capacitor as close to the device as possible, with a 15V absolute maximum and an operating range starting at 1.2V for LT1617 or 1V for LT1617-1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent Current | IQ | 20 | 30 | µA | Not Switching | 2 | |
| FB Comparator Trip Point | VFB | -1.205 | -1.23 | -1.255 | V | Over full operating temperature range (●) | 2 |
| FB Comparator Hysteresis | 8 | mV | 2 | ||||
| Output Voltage Line Regulation | 0.05 | 0.1 | %/V | 1.2V < VIN < 12V | 2 | ||
| FB Pin Bias Current | IFB | 1.3 | 2 | 2.7 | µA | VNFB = -1.23V; over full operating temperature range (●), Note 3 | 2 |
| Switch Off Time | tOFF | 400 | ns | 2 | |||
| Switch VCESAT | VCESAT | 85 | 120 | mV | ISW = 60mA (LT1617-1) | 2 | |
| Switch Current Limit | ILIM | 75 | 100 | 125 | mA | LT1617-1 | 2 |
| SHDN Pin Current | ISHDN | 2 | 3 | µA | VSHDN = 1.2V | 2 | |
| SHDN Pin Current | ISHDN | 8 | 12 | µA | VSHDN = 5V | 2 | |
| SHDN Input Voltage High | VSHDN | 0.9 | V | 2 | |||
| SHDN Input Voltage Low | VSHDN | 0.25 | V | 2 | |||
| Switch Leakage Current | ISW(leak) | 0.01 | 5 | µA | Switch Off, VSW = 5V | 2 | |
| Minimum Input Voltage | VIN | 1 | V | LT1617-1 | 2 | ||
| Operating Temperature Range | TOP | -40 | 85 | °C | Note 2: guaranteed 0°C to 70°C | 2 | |
| VIN, SHDN Voltage | VIN, VSHDN | 15 | V | 2 | |||
| SW Voltage | VSW | 36 | V | 2 | |||
| NFB Voltage | VNFB | -3 | V | 2 | |||
| Current into NFB Pin | INFB | -1 | mA | 2 | |||
| Junction Temperature | TJ | 125 | °C | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | Note 2 | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature | TLEAD | 300 | °C | Soldering, 10 sec | 2 | ||
| Junction-to-Ambient Thermal Resistance | θJA | 256 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT1617ES5-1#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt1617es5-1-trmpbf-etched.step/lt1617es5-1-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1617es5-1-trmpbf.step/lt1617es5-1-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
6df9ad225faaa49d, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).