3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX5134T
Wuxi Maxinmicro · Gate Drivers · SOT-23-6L
MX5134T from Wuxi Maxinmicro, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Gate drive supply that must be locally decoupled to GND with a low ESR/ESL capacitor placed as close as possible to the device, within the 4V to 15V recommended operating range. |
| 2 | PILOT | output | Gate drive output for an external turnoff FET, rated for 820mA peak sink and 660mA peak source current, connected to the turnoff MOSFET gate with a short, low-inductance path. |
| 3 | OUT | output | Gate drive output for the power FET, rated for 7.6A peak sink and source current, connected with a short, low-inductance path, where a gate resistor can be used to eliminate potential gate oscillations. |
| 4 | GND | power_in | Ground reference to which all signals are referenced. |
| 5 | INB | input | Inverting logic input, TTL and CMOS compatible and withstanding up to 15V regardless of VDD voltage, to be connected to GND when not used. |
| 6 | IN | input | Noninverting logic input, TTL and CMOS compatible and withstanding up to 15V regardless of VDD voltage, to be connected to VDD when not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi Maxinmicro |
| Package | SOT-23-6L |
| Category | Motor Driver ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Junction temperature (recommended operating) | -40 | 125 | ℃ | 1 | |||
| VDD supply voltage (recommended operating) | VDD | 4 | 15 | V | 1 | ||
| Power dissipation (recommended operating) | PD | 0.59 | W | 1 | |||
| VDD to GND (absolute maximum) | VDD | -0.3 | 18 | V | 1 | ||
| IN+ to GND (absolute maximum) | IN+ | -0.3 | 18 | V | 1 | ||
| OUT to GND (absolute maximum) | OUT | -0.3 | V | max VDD+0.3V | 1 | ||
| Junction temperature (absolute maximum) | 150 | ℃ | 1 | ||||
| Storage temperature | Tstg | -55 | 150 | ℃ | 1 | ||
| Leading temperature (soldering, 10 secs) | 260 | ℃ | 10 secs | 1 | |||
| ESD Susceptibility HBM | -2000 | 2000 | V | HBM | 1 | ||
| Supply current | IDD | 1 | 2.5 | mA | VDD=12V FS=25kHz | 3 | |
| Supply current IDD_OFF | IDD_OFF | 50 | 100 | µA | VDD=3.0V, IN=INB=GND | 3 | |
| UVLO rising threshold | UVLO_ON | 3.1 | 3.3 | 3.5 | V | VDD rising | 3 |
| UVLO falling threshold | UVLO_OFF | 3.5 | 3.85 | 4.2 | V | VDD falling | 3 |
| UVLO threshold hysteresis | UVLO_HYS | 0.2 | 0.5 | 0.8 | V | 3 | |
| Noninverting input high voltage | VIN_H | 1.8 | 2.1 | 2.4 | V | IN input rising | 3 |
| Inverting input high voltage | VINB_H | 1.8 | 2.1 | 2.4 | V | 3 | |
| Noninverting input low voltage | VIN_L | 0.9 | 1.2 | 1.5 | V | IN input falling | 3 |
| Inverting input low voltage | VINB_L | 0.9 | 1.2 | 1.5 | V | 3 | |
| High output voltage | VDD-VOH | 4 | 9 | mV | VDD = 12 V, IOUT = 10 mA | 3 | |
| Low output voltage | VOL | 4.5 | 9.5 | mV | VDD = 12 V, IOUT =- 10 mA | 3 | |
| Output resistance-pulling up @ 10V | RON_P | 0.45 | 0.65 | Ω | VDD=10V, IOUT=10mA | 3 | |
| Output resistance-pulling up @ 4.5V | RON_P | 0.65 | 0.95 | Ω | VDD=4.5V, IOUT=10mA | 3 | |
| Output resistance-pulling down @ 10V | RON_N | 0.4 | 0.6 | Ω | VDD=10V, IOUT=-10mA | 3 | |
| Output resistance-pulling down @ 4.5V | RON_N | 0.6 | 0.9 | Ω | VDD=4.5V, IOUT =-10mA | 3 | |
| Noninverting input pull down resistor | RINL | 400 | kΩ | 3 | |||
| Inverting input pull up resistor | RINBH | 400 | kΩ | 3 | |||
| Peak sink current | ISNK | -7.6 | A | 3 | |||
| Source current | ISRC | 7.6 | A | 3 | |||
| PILOT output resistance pulling down | RON_N | 3.5 | Ω | VDD=10V, PILOT=-100mA | 3 | ||
| PILOT output resistance pulling down | RON_N | 4.5 | Ω | VDD=4.5V, PILOT=-100mA | 3 | ||
| Peak sink current for PILOT | ISNK-P | 820 | mA | 3 | |||
| PILOT output resistance pulling up | RON_P | 6 | Ω | VDD=10V, PILOT=100mA | 3 | ||
| PILOT output resistance pulling up | RON_P | 10 | Ω | VDD=4.5V, PILOT=100mA | 3 | ||
| Peak source current for PILOT | ISRC_P | 660 | mA | 3 | |||
| Input capacitance | CIN | 2.5 | pF | 3 | |||
| Rise time | TRISE | 4 | ns | CLOAD=1.0nF | 3 | ||
| Fall time | TFALL | 3 | ns | CLOAD=1.0nF | 3 | ||
| PILOT rise time | TPR | 9.5 | ns | CL=330pF | 3 | ||
| PILOT fall time | TPF | 4 | ns | CL=330pF | 3 | ||
| Propagation delay, Low to High, noninverting | TD_ON | 15 | ns | CLOAD=1.0nF | 3 | ||
| Propagation delay, High to Low, noninverting | TD_OFF | 15 | ns | CLOAD=1.0nF | 3 | ||
| Out turn off to PILOT turn on propagation delay | TPD_ON | 7 | ns | CL=330pF | 3 | ||
| PILOT turn off to out turn on propagation delay | TPD_OFF | 10 | ns | CL=330pF | 3 | ||
| Package thermal resistance junction to ambient SOT-23 (6) | RθJA | 108.1 | ℃/W | SOT-23 (6) | 1 |
CAD (KiCad official)
- Symbol:
MX5134T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
mx5134t-etched.step/mx5134t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx5134t.step/mx5134t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi Maxinmicro datasheet (10 pp, sha256
1e38a25ed3aa0c72, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).