component
R5F2L3ACCNFP#31
Public Made by Adomby adom
RENESAS Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR5F2L3ACCNFP#31
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
R5F2L3ACCNFP#31 from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P13_3 | bidirectional | CMOS I/O port P13_3 (direction set per pin, pull-up selectable by program), shared with serial clock CLK0 and A/D input AN3. |
| 2 | P13_2 | bidirectional | CMOS I/O port P13_2 (direction set per pin, pull-up selectable by program), shared with serial data input RXD0 and A/D input AN2. |
| 3 | P13_1 | bidirectional | CMOS I/O port P13_1 (direction set per pin, pull-up selectable by program), shared with serial data output TXD0, A/D input AN1 and D/A output DA1. |
| 4 | P13_0 | bidirectional | CMOS I/O port P13_0 (direction set per pin, pull-up selectable by program), shared with A/D input AN0 and D/A output DA0. |
| 5 | WKUP0 | input | Input to exit power-off mode; connect to VSS when power-off mode is not used. |
| 6 | VREF | power_in | Reference voltage input pin for the A/D converter and the D/A converter. |
| 7 | MODE | input | Connect this pin to VCC via a resistor. |
| 8 | XCIN | input | XCIN clock input; connect a crystal oscillator between XCIN and XCOUT, or input an external clock here with XCOUT left open. |
| 9 | XCOUT | output | XCIN clock output; leave open when an external clock is input on XCIN. |
| 10 | RESET | input | Driving this pin low resets the MCU. |
| 11 | P12_1/XOUT | output | XIN clock output; connect a ceramic or crystal oscillator between XIN and XOUT, or leave open when an external clock is input on XIN. Pin is also programmable I/O port P12_1. |
| 12 | VSS/AVSS | power_in | Apply 0 V to the VSS pin; AVSS is the ground for the A/D converter. |
| 13 | P12_0/XIN | input | XIN clock input; connect a ceramic or crystal oscillator between XIN and XOUT, or input an external clock here. Pin is also programmable I/O port P12_0. |
| 14 | VCC/AVCC | power_in | Apply 1.8 V to 5.5 V to the VCC pin; AVCC supplies the A/D converter, with a capacitor connected between AVCC and AVSS. |
| 15 | P11_7 | bidirectional | CMOS I/O port P11_7 (LED drive capable), shared with INT7, Timer RE output TREO and A/D trigger ADTRG. |
| 16 | P11_6 | bidirectional | CMOS I/O port P11_6 (LED drive capable), shared with INT6 and Timer RB output TRBO. |
| 17 | P11_5 | bidirectional | CMOS I/O port P11_5 (LED drive capable), shared with INT5 and Timer RA output TRAO. |
| 18 | P11_4 | bidirectional | CMOS I/O port P11_4 (LED drive capable), shared with INT4, Timer RA I/O TRAIO and serial data input RXD0. |
| 19 | P11_3 | bidirectional | CMOS I/O port P11_3 (LED drive capable), shared with INT3, UART2 CTS2/RTS2, SSU chip select SCS and comparator B input IVCMP3. |
| 20 | P11_2 | bidirectional | CMOS I/O port P11_2 (LED drive capable), shared with INT2, UART2 RXD2/TXD2 (SCL2/SDA2), SSU data SSO, I2C data SDA and comparator B reference IVREF3. |
| 21 | P11_1 | bidirectional | CMOS I/O port P11_1 (LED drive capable), shared with INT1, UART2 RXD2/TXD2 (SCL2/SDA2), SSU data SSI and comparator B input IVCMP1. |
| 22 | P11_0 | bidirectional | CMOS I/O port P11_0 (LED drive capable), shared with INT0, CLK2, SSU clock SSCK, I2C clock SCL and comparator B reference IVREF1. |
| 23 | P10_7 | bidirectional | CMOS I/O port P10_7 (LED drive capable), shared with key input KI7 and Timer RD I/O TRDIOD1. |
| 24 | P10_6 | bidirectional | CMOS I/O port P10_6 (LED drive capable), shared with key input KI6 and Timer RD I/O TRDIOC1. |
| 25 | P10_5 | bidirectional | CMOS I/O port P10_5 (LED drive capable), shared with key input KI5 and Timer RD I/O TRDIOB1. |
| 26 | P10_4 | bidirectional | CMOS I/O port P10_4 (LED drive capable), shared with key input KI4 and Timer RD I/O TRDIOA1. |
| 27 | P10_3 | bidirectional | CMOS I/O port P10_3 (LED drive capable), shared with key input KI3 and Timer RD I/O TRDIOD0. |
| 28 | P10_2 | bidirectional | CMOS I/O port P10_2 (LED drive capable), shared with key input KI2 and Timer RD I/O TRDIOC0. |
| 29 | P10_1 | bidirectional | CMOS I/O port P10_1 (LED drive capable), shared with key input KI1 and Timer RD I/O TRDIOB0. |
| 30 | P10_0 | bidirectional | CMOS I/O port P10_0 (LED drive capable), shared with key input KI0, Timer RD I/O TRDIOA0 and external clock TRDCLK. |
| 31 | P7_7 | bidirectional | Programmable CMOS I/O port P7_7, shared with LCD common output COM0. |
| 32 | P7_6 | bidirectional | Programmable CMOS I/O port P7_6, shared with LCD common output COM1. |
| 33 | P7_5 | bidirectional | Programmable CMOS I/O port P7_5, shared with LCD common output COM2. |
| 34 | P7_4 | bidirectional | Programmable CMOS I/O port P7_4, shared with LCD common output COM3. |
| 35 | P7_3 | bidirectional | Programmable CMOS I/O port P7_3, shared with LCD segment output SEG55 and common output COM4. |
| 36 | P7_2 | bidirectional | Programmable CMOS I/O port P7_2, shared with LCD segment output SEG54 and common output COM5. |
| 37 | P7_1 | bidirectional | Programmable CMOS I/O port P7_1, shared with LCD segment output SEG53 and common output COM6. |
| 38 | P7_0 | bidirectional | Programmable CMOS I/O port P7_0, shared with LCD segment output SEG52 and common output COM7. |
| 39 | P6_7 | bidirectional | Programmable CMOS I/O port P6_7, shared with Timer RD I/O TRDIOD1 and LCD segment output SEG51. |
| 40 | P6_6 | bidirectional | Programmable CMOS I/O port P6_6, shared with Timer RD I/O TRDIOC1 and LCD segment output SEG50. |
| 41 | P6_5 | bidirectional | Programmable CMOS I/O port P6_5, shared with Timer RD I/O TRDIOB1 and LCD segment output SEG49. |
| 42 | P6_4 | bidirectional | Programmable CMOS I/O port P6_4, shared with Timer RD I/O TRDIOA1 and LCD segment output SEG48. |
| 43 | P6_3 | bidirectional | Programmable CMOS I/O port P6_3, shared with Timer RD I/O TRDIOD0 and LCD segment output SEG47. |
| 44 | P6_2 | bidirectional | Programmable CMOS I/O port P6_2, shared with Timer RD I/O TRDIOC0 and LCD segment output SEG46. |
| 45 | P6_1 | bidirectional | Programmable CMOS I/O port P6_1, shared with Timer RD I/O TRDIOB0 and LCD segment output SEG45. |
| 46 | P6_0 | bidirectional | Programmable CMOS I/O port P6_0, shared with Timer RD I/O TRDIOA0, external clock TRDCLK and LCD segment output SEG44. |
| 47 | P5_3 | bidirectional | Programmable CMOS I/O port P5_3, shared with LCD segment output SEG43. |
| 48 | P5_2 | bidirectional | Programmable CMOS I/O port P5_2, shared with LCD segment output SEG42. |
| 49 | P5_1 | bidirectional | Programmable CMOS I/O port P5_1, shared with LCD segment output SEG41. |
| 50 | P5_0 | bidirectional | Programmable CMOS I/O port P5_0, shared with LCD segment output SEG40. |
| 51 | P4_7 | bidirectional | Programmable CMOS I/O port P4_7, shared with Timer RC I/O TRCIOD and TRCIOB and LCD segment output SEG39. |
| 52 | P4_6 | bidirectional | Programmable CMOS I/O port P4_6, shared with Timer RC I/O TRCIOC and TRCIOB and LCD segment output SEG38. |
| 53 | P4_5 | bidirectional | Programmable CMOS I/O port P4_5, shared with Timer RC I/O TRCIOB and LCD segment output SEG37. |
| 54 | P4_4 | bidirectional | Programmable CMOS I/O port P4_4, shared with Timer RC I/O TRCIOA, trigger TRCTRG and LCD segment output SEG36. |
| 55 | P4_3 | bidirectional | Programmable CMOS I/O port P4_3, shared with Timer RC external clock TRCCLK, trigger TRCTRG and LCD segment output SEG35. |
| 56 | P4_2 | bidirectional | Programmable CMOS I/O port P4_2, shared with serial clock CLK1 and LCD segment output SEG34. |
| 57 | P4_1 | bidirectional | Programmable CMOS I/O port P4_1, shared with serial data input RXD1 and LCD segment output SEG33. |
| 58 | P4_0 | bidirectional | Programmable CMOS I/O port P4_0, shared with serial data output TXD1 and LCD segment output SEG32. |
| 59 | P3_7 | bidirectional | Programmable CMOS I/O port P3_7, shared with INT7, Timer RC trigger TRCTRG, A/D trigger ADTRG and LCD segment output SEG31. |
| 60 | P3_6 | bidirectional | Programmable CMOS I/O port P3_6, shared with INT6 and LCD segment output SEG30. |
| 61 | P3_5 | bidirectional | Programmable CMOS I/O port P3_5, shared with INT5 and LCD segment output SEG29. |
| 62 | P3_4 | bidirectional | Programmable CMOS I/O port P3_4, shared with INT4 and LCD segment output SEG28. |
| 63 | P3_3 | bidirectional | Programmable CMOS I/O port P3_3, shared with INT3 and LCD segment output SEG27. |
| 64 | P3_2 | bidirectional | Programmable CMOS I/O port P3_2, shared with INT2 and LCD segment output SEG26. |
| 65 | P3_1 | bidirectional | Programmable CMOS I/O port P3_1, shared with INT1 and LCD segment output SEG25. |
| 66 | P3_0 | bidirectional | Programmable CMOS I/O port P3_0, shared with INT0 and LCD segment output SEG24. |
| 67 | P2_7 | bidirectional | Programmable CMOS I/O port P2_7, shared with key input KI7 and LCD segment output SEG23. |
| 68 | P2_6 | bidirectional | Programmable CMOS I/O port P2_6, shared with key input KI6 and LCD segment output SEG22. |
| 69 | P2_5 | bidirectional | Programmable CMOS I/O port P2_5, shared with key input KI5 and LCD segment output SEG21. |
| 70 | P2_4 | bidirectional | Programmable CMOS I/O port P2_4, shared with key input KI4 and LCD segment output SEG20. |
| 71 | P2_3 | bidirectional | Programmable CMOS I/O port P2_3, shared with key input KI3 and LCD segment output SEG19. |
| 72 | P2_2 | bidirectional | Programmable CMOS I/O port P2_2, shared with key input KI2 and LCD segment output SEG18. |
| 73 | P2_1 | bidirectional | Programmable CMOS I/O port P2_1, shared with key input KI1 and LCD segment output SEG17. |
| 74 | P2_0 | bidirectional | Programmable CMOS I/O port P2_0, shared with key input KI0 and LCD segment output SEG16. |
| 75 | P1_7 | bidirectional | Programmable CMOS I/O port P1_7, shared with LCD segment output SEG15. |
| 76 | P1_6 | bidirectional | Programmable CMOS I/O port P1_6, shared with LCD segment output SEG14. |
| 77 | P1_5 | bidirectional | Programmable CMOS I/O port P1_5, shared with LCD segment output SEG13. |
| 78 | P1_4 | bidirectional | Programmable CMOS I/O port P1_4, shared with LCD segment output SEG12. |
| 79 | P1_3 | bidirectional | Programmable CMOS I/O port P1_3, shared with A/D input AN15 and LCD segment output SEG11. |
| 80 | P1_2 | bidirectional | Programmable CMOS I/O port P1_2, shared with A/D input AN14 and LCD segment output SEG10. |
| 81 | P1_1 | bidirectional | Programmable CMOS I/O port P1_1, shared with A/D input AN13 and LCD segment output SEG9. |
| 82 | P1_0 | bidirectional | Programmable CMOS I/O port P1_0, shared with A/D input AN12 and LCD segment output SEG8. |
| 83 | P0_7 | bidirectional | Programmable CMOS I/O port P0_7, shared with A/D input AN11 and LCD segment output SEG7. |
| 84 | P0_6 | bidirectional | Programmable CMOS I/O port P0_6, shared with A/D input AN10 and LCD segment output SEG6. |
| 85 | P0_5 | bidirectional | Programmable CMOS I/O port P0_5, shared with A/D input AN9 and LCD segment output SEG5. |
| 86 | P0_4 | bidirectional | Programmable CMOS I/O port P0_4, shared with A/D input AN8 and LCD segment output SEG4. |
| 87 | P0_3 | bidirectional | Programmable CMOS I/O port P0_3, shared with A/D input AN7 and LCD segment output SEG3. |
| 88 | P0_2 | bidirectional | Programmable CMOS I/O port P0_2, shared with A/D input AN6 and LCD segment output SEG2. |
| 89 | P0_1 | bidirectional | Programmable CMOS I/O port P0_1, shared with A/D input AN5 and LCD segment output SEG1. |
| 90 | P0_0 | bidirectional | Programmable CMOS I/O port P0_0, shared with A/D input AN4 and LCD segment output SEG0. |
| 91 | VL1 | bidirectional | LCD power supply pin; apply 0 ≤ VL1 ≤ VL2 ≤ VL3 ≤ VL4, and VL1 can serve as the reference potential input or output when the voltage multiplier is set. |
| 92 | VL2 | input | LCD power supply pin; apply 0 ≤ VL1 ≤ VL2 ≤ VL3 ≤ VL4. |
| 93 | VL3 | input | LCD power supply pin; apply 0 ≤ VL1 ≤ VL2 ≤ VL3 ≤ VL4. |
| 94 | P12_3/CL2 | output | Connect pin for the LCD control voltage multiplier capacitor (CL2); pin is also programmable I/O port P12_3. |
| 95 | P12_2/CL1 | output | Connect pin for the LCD control voltage multiplier capacitor (CL1); pin is also programmable I/O port P12_2. |
| 96 | VL4 | input | LCD power supply pin; apply 0 ≤ VL1 ≤ VL2 ≤ VL3 ≤ VL4. |
| 97 | P13_7 | bidirectional | CMOS I/O port P13_7, shared with A/D input AN19 and Timer RG external clock input TRGCLKB. |
| 98 | P13_6 | bidirectional | CMOS I/O port P13_6, shared with A/D input AN18 and Timer RG I/O TRGIOB. |
| 99 | P13_5 | bidirectional | CMOS I/O port P13_5, shared with A/D input AN17 and Timer RG external clock input TRGCLKA. |
| 100 | P13_4 | bidirectional | CMOS I/O port P13_4, shared with A/D input AN16 and Timer RG I/O TRGIOA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC/AVCC | -0.3 | 6.5 | V | 45 | ||
| Input voltage XIN (oscillation buffer ON) | VI | -0.3 | 1.65 | V | XIN-XOUT oscillation on (oscillation buffer ON) | 45 | |
| Output voltage XOUT (oscillation buffer ON) | VO | -0.3 | 1.65 | V | XIN-XOUT oscillation on (oscillation buffer ON) | 45 | |
| Output voltage VL4 | VO | -0.3 | 6.5 | V | 45 | ||
| Output voltage CL1, CL2 | VO | -0.3 | 6.5 | V | 45 | ||
| Power dissipation | Pd | 500 | mW | −40°C ≤ Topr ≤ 85°C | 45 | ||
| Operating ambient temperature | Topr | -20 | 85 | °C | N version (D version: −40 to 85 °C) | 45 | |
| Storage temperature | Tstg | -65 | 150 | °C | 45 | ||
| Supply voltage | VCC/AVCC | 1.8 | 5.5 | V | 46 | ||
| Peak sum output H current | IOH(sum) | -160 | mA | Sum of all pins IOH(peak) | 46 | ||
| Average sum output H current | IOH(sum) | -80 | mA | Sum of all pins IOH(avg) | 46 | ||
| Peak sum output L current | IOL(sum) | 160 | mA | Sum of all pins IOL(peak) | 46 | ||
| Average sum output L current | IOL(sum) | 80 | mA | Sum of all pins IOL(avg) | 46 | ||
| Peak output H current, port P10, P11 | IOH(peak) | -40 | mA | Port P10, P11 | 46 | ||
| Peak output H current, other pins | IOH(peak) | -10 | mA | Other pins | 46 | ||
| Average output H current, port P10, P11 | IOH(avg) | -20 | mA | Port P10, P11 | 46 | ||
| Average output H current, other pins | IOH(avg) | -5 | mA | Other pins | 46 | ||
| Peak output L current, port P10, P11 | IOL(peak) | 40 | mA | Port P10, P11 | 46 | ||
| Peak output L current, other pins | IOL(peak) | 10 | mA | Other pins | 46 | ||
| Average output L current, port P10, P11 | IOL(avg) | 20 | mA | Port P10, P11 | 46 | ||
| Average output L current, other pins | IOL(avg) | 5 | mA | Other pins | 46 | ||
| XIN clock input oscillation frequency | f(XIN) | 20 | MHz | 2.7 V ≤ VCC ≤ 5.5 V | 46 | ||
| XIN clock input oscillation frequency | f(XIN) | 5 | MHz | 1.8 V ≤ VCC < 2.7 V | 46 | ||
| XCIN clock input oscillation frequency | f(XCIN) | 32.768 | 50 | kHz | 1.8 V ≤ VCC ≤ 5.5 V | 46 | |
| fOCO40M frequency (count source for timer RC, RD, RG) | fOCO40M | 32 | 40 | MHz | 2.7 V ≤ VCC ≤ 5.5 V | 46 | |
| fOCO-F frequency | fOCO-F | 20 | MHz | 2.7 V ≤ VCC ≤ 5.5 V | 46 | ||
| fOCO-F frequency | fOCO-F | 5 | MHz | 1.8 V ≤ VCC < 2.7 V | 46 | ||
| CPU clock frequency | f(BCLK) | 20 | MHz | 2.7 V ≤ VCC ≤ 5.5 V | 46 | ||
| CPU clock frequency | f(BCLK) | 5 | MHz | 1.8 V ≤ VCC < 2.7 V | 46 | ||
| Resolution | 10 | Bit | Vref = AVCC | 48 | |||
| Absolute accuracy, 10-bit mode | -3 | 3 | LSB | 10-bit mode Vref = AVCC = 5.0 V AN0 to AN19 input | 48 | ||
| Absolute accuracy, 10-bit mode | -5 | 5 | LSB | 10-bit mode Vref = AVCC = 3.3 V AN0 to AN19 input | 48 | ||
| A/D conversion clock | φAD | 2 | 20 | MHz | 4.0 ≤ Vref = AVCC ≤ 5.5 V | 48 | |
| A/D conversion clock | φAD | 2 | 16 | MHz | 3.2 ≤ Vref = AVCC ≤ 5.5 V | 48 | |
| A/D conversion clock | φAD | 2 | 10 | MHz | 2.7 ≤ Vref = AVCC ≤ 5.5 V | 48 | |
| A/D conversion clock | φAD | 2 | 5 | MHz | 2.2 ≤ Vref = AVCC ≤ 5.5 V | 48 | |
| Sampling time | tSAMP | 0.8 | µs | φAD = 20 MHz | 48 | ||
| Conversion time, 10-bit mode | tCONV | 2.2 | µs | Vref = AVCC = 5.0 V, φAD = 20 MHz | 48 | ||
| On-chip reference voltage | OCVREF | 1.19 | 1.34 | 1.49 | V | 2 MHz ≤ φAD ≤ 4 MHz | 48 |
| Absolute accuracy (D/A converter) | 2.5 | LSB | 49 | ||||
| Setup time (D/A converter) | tsu | 3 | µs | 49 | |||
| Offset (Comparator B) | 5 | 100 | mV | 49 | |||
| Program/erase endurance (program ROM) | 1000 | times | 50 | ||||
| Program, erase voltage (program ROM) | 2.7 | 5.5 | V | 50 | |||
| Program/erase endurance (data flash) | 10000 | times | 51 | ||||
| Program, erase temperature (data flash) | -20 | 85 | °C | N version (note 6: −40 °C for D version) | 51 | ||
| Voltage detection level Vdet0_0 | Vdet0 | 1.8 | 1.9 | 2.05 | V | Voltage detection level Vdet0_0 | 52 |
| Voltage detection level Vdet0_1 | Vdet0 | 2.15 | 2.35 | 2.5 | V | Voltage detection level Vdet0_1 | 52 |
| Voltage detection level Vdet0_2 | Vdet0 | 2.7 | 2.85 | 3.05 | V | Voltage detection level Vdet0_2 | 52 |
| Voltage detection level Vdet0_3 | Vdet0 | 3.55 | 3.8 | 4.05 | V | Voltage detection level Vdet0_3 | 52 |
| Voltage detection level Vdet2_0 | Vdet2 | 3.7 | 4 | 4.3 | V | At the falling of VCC | 53 |
| External power VCC rise gradient (power-on reset) | trth | 0 | 50000 | mV/msec | External power VCC rise gradient | 53 | |
| Power-off mode operating supply voltage | 2.2 | 5.5 | V | 55 | |||
| Input leakage current H | IIH | 5 | µA | VI = 5.0 V, VCC = 5.0 V | 56 | ||
| Input leakage current L | IIL | -5 | µA | VI = 0 V, VCC = 5.0 V | 56 | ||
| Pull-up resistance | RPULLUP | 25 | 50 | 100 | kΩ | VI = 0 V, VCC = 5.0 V | 56 |
| Output L voltage, other pins | VOL | 2 | V | VCC = 5V IOL = 5 mA | 56 | ||
| Output L voltage, port P10, P11 | VOL | 2 | V | VCC = 5V IOL = 20 mA | 56 |
CAD (KiCad official)
- Symbol:
R5F2L3ACCNFP#31 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
r5f2l3accnfp-31-etched.step/r5f2l3accnfp-31-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f2l3accnfp-31.step/r5f2l3accnfp-31.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (75 pp, sha256
976fb16af1160000, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).