3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F400RBT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
STM32F400RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup-domain supply pin that powers the RTC, the 32 kHz oscillator and the backup registers when VDD is absent. |
| 2 | PC13 | bidirectional | General-purpose 5 V tolerant I/O on the backup domain; the power switch limits sink current to 3 mA, and in output mode the maximum is 2 MHz at 30 pF. |
| 3 | PC14-OSC32_IN | bidirectional | Backup-domain I/O that doubles as the 32.768 kHz oscillator input (OSC32_IN); same 3 mA power-switch limit as PC13. |
| 4 | PC15-OSC32_OUT | bidirectional | Backup-domain I/O that doubles as the 32.768 kHz oscillator output (OSC32_OUT); same 3 mA power-switch limit as PC13. |
| 5 | PH0 - OSC_IN | bidirectional | 5 V tolerant I/O (FT) that doubles as the high-speed external oscillator input (OSC_IN) for the 4-26 MHz clock. |
| 6 | PH1 - OSC_OUT | bidirectional | 5 V tolerant I/O (FT) that doubles as the high-speed external oscillator output (OSC_OUT). |
| 7 | NRST | input | Active-low bidirectional reset pin with an internal weak pull-up; it resets the device when pulled low. |
| 8 | PC0 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_IN1, EVENTOUT, ADC1_10 and WKUP2 functions. |
| 9 | PC1 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_OUT, EVENTOUT, ADC1_11 and WKUP3 functions. |
| 10 | PC2 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_IN2, SPI2_MISO, EVENTOUT and ADC1_12 functions. |
| 11 | PC3 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_ETR, SPI2_MOSI/I2S2_SD, EVENTOUT and ADC1_13 functions. |
| 12 | VSSA/VREF- | power_in | Analog ground and reference-ground pin for the ADC, DAC, reset block, RC and PLL; must be connected to VSS. |
| 13 | VDDA/VREF+ | power_in | Analog supply (1.7-3.6 V) and ADC/DAC reference positive pin for the ADC, DAC, reset block, RC and PLL; must be connected to VDD. |
| 14 | PA0 | bidirectional | 5 V tolerant general-purpose I/O with TIM5_CH1, USART2_CTS, EVENTOUT, ADC1_0 and WKUP1 functions. |
| 15 | PA1 | bidirectional | 5 V tolerant general-purpose I/O with TIM5_CH2, USART2_RTS, EVENTOUT and ADC1_1 functions. |
| 16 | PA2 | bidirectional | 5 V tolerant general-purpose I/O with TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, EVENTOUT and ADC1_2 functions. |
| 17 | PA3 | bidirectional | 5 V tolerant general-purpose I/O with TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, EVENTOUT and ADC1_3 functions. |
| 18 | VSS | power_in | Ground pin for the digital core and I/O circuits. |
| 19 | VDD | power_in | Digital supply pin for I/O and internal regulator, 1.7 to 3.6 V. |
| 20 | PA4 | bidirectional | 5 V tolerant general-purpose I/O with SPI1_NSS/I2S1_WS, USART2_CK, EVENTOUT and ADC1_4 functions. |
| 21 | PA5 | bidirectional | General-purpose I/O (TC standard 3.3 V, not 5 V tolerant) with SPI1_SCK/I2S1_CK, EVENTOUT, ADC1_5 and DAC_OUT1 functions. |
| 22 | PA6 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_BKIN, SPI1_MISO, I2S2_MCK, EVENTOUT and ADC1_6 functions. |
| 23 | PA7 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH1N, SPI1_MOSI/I2S1_SD, EVENTOUT and ADC1_7 functions. |
| 24 | PC4 | bidirectional | 5 V tolerant general-purpose I/O with TIM9_CH1, EVENTOUT and ADC1_14 functions. |
| 25 | PC5 | bidirectional | 5 V tolerant general-purpose I/O with TIM9_CH2, I2C4_SMBA, EVENTOUT and ADC1_15 functions. |
| 26 | PB0 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH2N, SPI5_SCK/I2S5_CK, EVENTOUT and ADC1_8 functions. |
| 27 | PB1 | bidirectional | General-purpose I/O (TC standard 3.3 V, not 5 V tolerant) with TIM1_CH3N, SPI5_NSS/I2S5_WS, EVENTOUT and ADC1_9 functions. |
| 28 | PB2 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_OUT, EVENTOUT and BOOT1 functions. |
| 29 | PB10 | bidirectional | 5 V tolerant general-purpose I/O with I2C2_SCL, SPI2_SCK/I2S2_CK, I2S1_MCK, I2C4_SCL and EVENTOUT functions. |
| 30 | VCAP_1 | power_out | Internal regulator output pin; an external ceramic capacitor (4.7 uF, ESR 1 ohm per the datasheet layout note) must be connected to it. |
| 31 | VSS | power_in | Ground pin for the digital core and I/O circuits. |
| 32 | VDD | power_in | Digital supply pin for I/O and internal regulator, 1.7 to 3.6 V. |
| 33 | PB12 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_BKIN, TIM5_CH1, I2C2_SMBA, SPI2_NSS/I2S2_WS and EVENTOUT functions. |
| 34 | PB13 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH1N, I2C4_SMBA, SPI2_SCK/I2S2_CK and EVENTOUT functions. |
| 35 | PB14 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH2N, I2C4_SDA, SPI2_MISO and EVENTOUT functions. |
| 36 | PB15 | bidirectional | 5 V tolerant general-purpose I/O with RTC_50Hz, TIM1_CH3N, I2C4_SCL, SPI2_MOSI/I2S2_SD and EVENTOUT functions. |
| 37 | PC6 | bidirectional | 5 V tolerant general-purpose I/O with TRACECLK, I2C4_SCL, I2S2_MCK, USART6_TX and EVENTOUT functions. |
| 38 | PC7 | bidirectional | 5 V tolerant general-purpose I/O with I2C4_SDA, SPI2_SCK/I2S2_CK, I2S1_MCK, USART6_RX and EVENTOUT functions. |
| 39 | PC8 | bidirectional | 5 V tolerant general-purpose I/O with USART6_CK and EVENTOUT functions. |
| 40 | PC9 | bidirectional | 5 V tolerant general-purpose I/O with MCO_2, I2C4_SDA, I2S2_CKIN and EVENTOUT functions. |
| 41 | PA8 | bidirectional | 5 V tolerant general-purpose I/O with MCO_1, TIM1_CH1, I2C4_SCL, USART1_CK and EVENTOUT functions. |
| 42 | PA9 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH2, USART1_TX and EVENTOUT functions; USART1 TX is the bootloader interface pin on LQFP64. |
| 43 | PA10 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH3, SPI5_MOSI/I2S5_SD, USART1_RX and EVENTOUT functions. |
| 44 | PA11 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_CH4, USART1_CTS, USART6_TX and EVENTOUT functions. |
| 45 | PA12 | bidirectional | 5 V tolerant general-purpose I/O with TIM1_ETR, SPI5_MISO, USART1_RTS, USART6_RX and EVENTOUT functions. |
| 46 | PA13 | bidirectional | 5 V tolerant general-purpose I/O with JTMS-SWDIO (serial-wire debug data) and EVENTOUT functions. |
| 47 | VSS | power_in | Ground pin for the digital core and I/O circuits. |
| 48 | VDD | power_in | Digital supply pin for I/O and internal regulator, 1.7 to 3.6 V. |
| 49 | PA14 | bidirectional | 5 V tolerant general-purpose I/O with JTCK-SWCLK (serial-wire debug clock) and EVENTOUT functions. |
| 50 | PA15 | bidirectional | 5 V tolerant general-purpose I/O with JTDI, SPI1_NSS/I2S1_WS, USART1_TX and EVENTOUT functions. |
| 51 | PC10 | bidirectional | 5 V tolerant general-purpose I/O with TRACED0, TIM5_CH2 and EVENTOUT functions. |
| 52 | PC11 | bidirectional | 5 V tolerant general-purpose I/O with TRACED1, TIM5_CH3 and EVENTOUT functions. |
| 53 | PC12 | bidirectional | 5 V tolerant general-purpose I/O with TRACED2, TIM11_CH1 and EVENTOUT functions. |
| 54 | PB11 | bidirectional | 5 V tolerant general-purpose I/O with TRACED3, TIM5_CH4, I2C2_SDA, I2S2_CKIN and EVENTOUT functions. |
| 55 | PB3 | bidirectional | 5 V tolerant general-purpose I/O with JTDO-SWO, I2C4_SDA, SPI1_SCK/I2S1_CK, USART1_RX, I2C2_SDA and EVENTOUT functions. |
| 56 | PB4 | bidirectional | 5 V tolerant general-purpose I/O with JTRST, SPI1_MISO and EVENTOUT functions. |
| 57 | PB5 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI/I2S1_SD and EVENTOUT functions. |
| 58 | PB6 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_ETR, I2C1_SCL, USART1_TX and EVENTOUT functions. |
| 59 | PB7 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_IN2, I2C1_SDA, USART1_RX and EVENTOUT functions. |
| 60 | BOOT0 | input | Dedicated boot-mode selection pin sampled at startup to choose user Flash, system memory or embedded SRAM boot. |
| 61 | PB8 | bidirectional | 5 V tolerant general-purpose I/O with LPTIM1_OUT, I2C1_SCL, SPI5_MOSI/I2S5_SD and EVENTOUT functions. |
| 62 | PB9 | bidirectional | 5 V tolerant general-purpose I/O with TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, I2C2_SDA and EVENTOUT functions. |
| 63 | VSS | power_in | Ground pin for the digital core and I/O circuits. |
| 64 | VDD | power_in | Digital supply pin for I/O and internal regulator, 1.7 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (power supply and I/O) | 1.7 | 3.6 | V | 1.7 V lower limit with PDR OFF | 7 | ||
| Operating temperature range | -40 | 85 | °C | 7 |
CAD (KiCad official)
- Symbol:
STM32F400RBT6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32f400rbt6-etched.step/stm32f400rbt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f400rbt6.step/stm32f400rbt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (50 pp, sha256
2535b77ddd709eb3, retrieved 2026-11-05, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).