component
MIC6315-26D2UY-TR
Public Made by Adomby adom
Microchip Tech Supervisor And Reset ICs, SOT-143-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC6315-26D2UY-TR
Microchip Tech · Supervisor And Reset ICs · SOT-143-4
MIC6315-26D2UY-TR from Microchip Tech, in a SOT-143-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | IC ground reference pin. |
| 2 | /RESET | output | Active-low open-drain reset output that goes low when VCC falls below the reset threshold and stays asserted for one reset timeout period after VCC exceeds the threshold; it requires an external pull-up, and the pull-up voltage must be limited to 6.0V or less (absolute maximum). |
| 3 | /MR | input | Manual reset input where a logic LOW forces a reset that remains asserted while held low and for one reset timeout period after it goes HIGH; it can be driven by a switch to ground or by TTL/CMOS logic, and should be left floating if unused. |
| 4 | VCC | power_in | Power supply input with an operating voltage range of 1V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-143-4 |
| Category | Power Management (PMIC) |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 1 | 5.5 | V | 3 | ||
| Supply Current | ICC | 5 | 15 | µA | VCC = 5.5V, no load | 3 | |
| Supply Current | ICC | 5 | 10 | µA | VCC = 3.6V, no load | 3 | |
| Reset Voltage Threshold tolerance (nominal VTH 2.63V for MIC6315-26D2UY) | VTH | -2.5 | 2.5 | % | Note 1 | 3 | |
| Reset Timeout Period (D2 variant, 20 ms minimum) | tRST | 20 | 28 | 44 | ms | D2U | 3 |
| /RESET Output Voltage (low) | VOL | 0.4 | V | VCC ≥ 4.0V, ISNK = 3.2 mA | 3 | ||
| /RESET Output Voltage (low) | VOL | 0.3 | V | VCC ≥ 2.5V, ISNK = 1.2 mA | 3 | ||
| /RESET Output Leakage | 1 | µA | /RESET deasserted | 3 | |||
| /MR-to-Reset Delay | 0.5 | µs | , | 3 | |||
| /MR Input Threshold (VIH, VTH < 4.0V row) | VIH | 0.7 | x VCC | VTH < 4.0V | 3 | ||
| /MR Input Threshold (VIL, VTH < 4.0V row) | VIL | 0.25 | x VCC | VTH < 4.0V | 4 | ||
| /MR Pull-Up Resistance | 10 | 20 | 30 | kΩ | , | 4 | |
| /MR Glitch Immunity | 100 | ns | , | 4 | |||
| Junction Temperature Range | TJ | -40 | 125 | °C | Note 1 | 4 | |
| Operating Temperature Range | TA | -40 | 85 | °C | , | 4 | |
| Storage Temperature Range | TS | -65 | 150 | °C | , | 4 | |
| Lead Temperature | 300 | °C | Soldering, 10 sec. | 4 | |||
| Terminal Voltage (VCC, /RESET) | -0.3 | 6 | V | 3 | |||
| Terminal Voltage (/MR) | -0.3 | V | Upper limit printed as (VCC + 0.3V) | 3 | |||
| Rate of Rise (VCC) | 100 | V/µs | 3 | ||||
| Input Current (VCC, /MR) | 20 | mA | 3 | ||||
| Output Current (/RESET) | 20 | mA | 3 | ||||
| ESD Rating | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Input Voltage (/RESET) | 5.5 | V | 3 | ||||
| Power Dissipation | 320 | mW | TA = +70°C | 3 | |||
| /MR Minimum Pulse Width | 10 | µs | , | 3 |
CAD (KiCad official)
- Symbol:
MIC6315-26D2UY-TR - Footprint:
Package_TO_SOT_SMD:SOT-143 - 3D model: SOT-143-4 (KiCad packages3D, STEP)
- 3D model files:
mic6315-26d2uy-tr-etched.step/mic6315-26d2uy-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic6315-26d2uy-tr.step/mic6315-26d2uy-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
4fbfdf9bf321e18b, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).