Phoenix Contact 1817864

PCB header MC 1,5/8-GF-3,81, 8 positions, 3.81 mm pitch, right angle, threaded flange (mates with MC 1,5/8-STF-3,81 plugs).

Distributor numbers and stock from the LEDster-TI BOM, checked 2026-11-02: DigiKey 1817864-ND (stock 50), Mouser 651-1817864 (stock 51), LCSC none (stock n/a).

Files

• 1817864.kicad_mod footprint (KiCad)
• 1817864.kicad_sym symbol (KiCad)
• 1817864.step 3D model (STEP, Z-up, seated on z = 0, centred on the footprint origin)
• 1817864.lbr Fusion / EAGLE library part (adom-lbr from the files above with this page's metadata; no embedded 3D, bind the STEP)

Provenance

• 1817864.kicad_mod: pads 1..8 (THT, drill 1.2 / dia 1.8 mm, 3.81 mm pitch) and the two flange mounting pads MH1 / MH2 (plated, drill 2.4 / dia 3.6 mm, no net) copied exactly from the EAGLE package 1817864 in the LEDster-TI board (survey/LEDster-TI.brd, sha256/16 d805b7a21df47b82), EAGLE y-up converted to KiCad y-down (y negated). The LEDster-TI case was designed around this geometry, so it was kept as is. Silkscreen, fab outline and the courtyard rectangle copied from KiCad Connector_Phoenix_MC:PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange_MountHole (https://gitlab.com/kicad/libraries/kicad-footprints/-/raw/master/Connector_Phoenix_MC.pretty/PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange_MountHole.kicad_mod, sha256/16 590e3239db2efac3); its two courtyard circles around the NPTH screw holes were dropped.
• 1817864.step: KiCad Connector_Phoenix_MC.3dshapes/PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange_MountHole.step (packages3D), byte-identical copy (sha256/16 75cec8f154980cf5). The KiCad footprint and the EAGLE package both put pin 1 at the origin with the pins along +x at 3.81 mm, and the KiCad model binding has offset/rotate 0, so no transform was applied: the model sits on the pads.
• Upstream terms: KiCad official library (gitlab.com/kicad/libraries/kicad-footprints, kicad-packages3D and kicad-symbols, master, fetched 2026-11-02). License: CC-BY-SA 4.0 with the KiCad libraries exception (using these files in a design, and distributing the design or its manufacturing output, does not require the design to be licensed under CC-BY-SA). The STEP is KiCad's generic model for this Phoenix series.
• 1817864.kicad_sym: KiCad Connector_Generic:Conn_01x08 (https://gitlab.com/kicad/libraries/kicad-symbols/-/raw/master/Connector_Generic.kicad_symdir/Conn_01x08.kicad_sym), renamed to the MPN; pins 1..8 unchanged. MH1 / MH2 are footprint-only pads (no symbol pin, no net).

Notes

• Mounting pads (KiCad frame): MH1 at x = -4.5, y = 0.9 mm, MH2 at x = 31.17, y = 0.9 mm. KiCad's own footprint puts its NPTH screw holes at x = -4.5 and 31.17 mm, y = 0.9 mm.

License

Adom-authored content CC-BY-4.0; third-party files keep their upstream terms (see LICENSE).