component
M24C02-WDW6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C02-WDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M24C02-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable address input bit 0; must be tied to VCC or VSS to set the least significant bit (b1) of the 7-bit device select code. |
| 2 | E1 | input | Chip Enable address input bit 1; must be tied to VCC or VSS to set the middle bit (b2) of the device select code. |
| 3 | E2 | input | Chip Enable address input bit 2; must be tied to VCC or VSS to set the most significant chip enable bit (b3) of the device select code. |
| 4 | VSS | power_in | Ground; reference for the VCC supply voltage and all logic circuits. |
| 5 | SDA | bidirectional | Serial Data open-drain input/output for I2C bus; transfers data in or out of device and requires pull-up resistor to VCC. |
| 6 | SCL | input | Serial Clock input; strobes data available on SDA input and controls output data timing for I2C bus communication. |
| 7 | WC | input | Write Control input; write operations are disabled to entire memory array when driven high, enabled when low or left floating. |
| 8 | VCC | power_in | Supply voltage input, 2.5 V to 5.5 V for M24C02-W variant; must be stable and decoupled with 10 nF to 100 nF capacitor close to pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C02-WDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24c02-wdw6tp-etched.step/m24c02-wdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c02-wdw6tp.step/m24c02-wdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
943c0b9f52652f9b, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).